Month: April 2018

Moss Europe has re-released it’s popular Turn Signal Air Intakes for the ‘89-’97 MX-5 and made them even better than ever!

The urethane scoops are a precision fit and now feature a smooth glossy black finish which can be left as it is or painted to match the car.

These clever intakes will supply extra cool air into your engine compartment although for use in Europe it should be noted that the original sidelights will need relocation.

Best of all these re-designed scoops now cost less than the originals. They were £75.00. They are now just £56.26 per pair – saving you £18.74! Order as Part Number: 903-202.

For more details contact Moss Europe Ltd, on +44 (0) 20 8867 2000
or visit their website: www.moss-europe.co.uk

Cravenspeed, the renown performance parts manufacture from Portland, Oregon, originally designed this lightweight battery tie-down for their own ND Mazda MX-5. Now it is in general production and available from Moss Europe.

It can accommodate a battery up to 5.2 inches (132mm) wide and installs in seconds. The tie-down is machined from billet aluminium, powder coated with a textured red finish, and then laser engraved with the CravenSpeed name.

Note that the production run of this tie down will be limited so customers are advised to act quickly while stocks last. Order as part number 910-112. Retail price £40.80.

For more details contact Moss Europe Ltd, on +44 (0) 20 8867 2000
or visit their website: www.moss-europe.co.uk

If you have to change your Mini’s door skins or the boot lid skin because they are corroded, why not to replace them with the aluminium version?
You will never have to replace them again.

Your Mini will also benefit from the lighter weight.

Moss Europe can now offer door skins for both sliding window models (Mk1-2) and wind-up versions (1970-onwards) and a boot lid skin to suit Mk1-2 classic Minis.

Part Number: HMP441051 Aluminium Boot Lid Skin for Mini Mk1-2 £120.00
Part Number: HMP441052 Aluminium Door Skin, RH for Mini Mk1-2 £125.00
Part Number: HMP441053 Aluminium Door Skin, LH for Mini Mk1-2 £125.00
Part Number: CZH3300AL Aluminium Door Skin, RH for Mini 1970-onwards £43.10
Part Number: CZH3301AL Aluminium Door Skin, LH for Mini 1970-onwards £43.10

For more details contact Moss Europe Ltd, on +44 (0) 20 8867 2000
or visit their website: www.moss-europe.co.uk

Now you can customise your MOMO steering wheel by switching to a different design of MOMO horn button. Colour key or contrast with your interior.

Available colours:
Gloss Blue – Chrome MOMO Arrow Logo
Gloss Red – Chrome MOMO Arrow Logo
Gloss Black – Yellow MOMO Heritage Logo
Chrome – Yellow MOMO Arrow Logo
Chrome – Chrome MOMO Arrow Logo
Gloss Black – Yellow MOMO Arrow Logo
Matt Black – Chrome MOMO Arrow Logo
Gloss Anthracite – Chrome MOMO Arrow Logo

Price: £19.55 each inc VAT
Fitment information is available at www.momo-uk.co.uk.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.momo-uk.co.uk

Mini Spares is pleased to announce that it can now offer an excellent range of quality hand tools at sensible prices to enable you to work on your classic Mini or other British (or American) classic.

A range of Imperial socket sets will provide you with all the sizes you will probably need for servicing and rebuilds.

TOOL26 is a 1/4″ drive, 6 point, shallow AF/Imperial socket set with sizes: 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 7/16″, 15/32″ and 1/2″ AF – £9.90 inc VAT.

TOOL27 is a deep socket version of TOOL26 – £13.37 inc VAT.

TOOL28 is a 3/8″ drive, 6 point, shallow, AF/Imperial socket set with sizes: 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″ and 13/16″ – £12.88 inc VAT.

TOOL29 is a deep socket version of TOOL28 – £16.84 inc VAT.

For those that require both Imperial and metric tools there are…

TOOL31 is a 32 piece Imperial & Metric spanner set with mirror polished spanners.
Contents: Bi Hex x Metric combination spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19mm and Stubby 10, 11, 12, 13, 15mm plus Bi-Hex x AF sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″ and Stubby 3/8″, 7/16″, 1/2″, 9/16″and 5/8″ – £32.40 inc vat

TOOL30 Imperial/Metric Offset Feeler Gauge Set
Metric and Imperial offset feeler gauge set, ideal for setting tappet clearance, primary gear end float etc. Offset for ease of use. £10.90 inc vat

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

If you’ve ever had to change a fuel filter on an injection classic Mini you will know that it is necessary need to remove the whole bracket in order to remove the filter as the securing bolt is on the wrong side for easy access. This is because the bracket was originally used on other models (Rover parts bin special!).

To make life easier Mini Spares has redesigned this bracket so that it splits in half: the bolts are on the correct side so that there is no need to remove the whole bracket from the subframe when changing the filter.

Order as part number WJU10142, at £23.40 inc VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style is pleased to announce that it can now offer the REMUS Powerizer. This is what most would consider to be a “piggy-back ECU” and to some extent that is correct.
The Powerizer offers a complete Plug & Play solution for enhanced engine mapping, without having to physically touch the ECU.

The Powerizer takes the signals from the ECU and enhances these with the new parameters that are installed on the unit in so doing optimising up to a 1,000 times per second. The biggest benefit of this unit is that it doesn’t push the limits of the engine or engine components.

The Plug & Play nature of the unit means that it can be easily removed from the car or blanked off for any servicing/warranty work. Thanks to the increase in torque at lower RPM you save on fuel consumption too!
– Up to 25% more power.
– Up to 20% more torque.
– Simple installation/removal.
– Fuel saving up to 1L / 100Km.
– 3 Preset Modes – ECO|Sport|Race

Available for most recent and current BMW models. (Please enquire)
Prices start at £479 inc VAT.

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

M-Style is pleased to announce that it can now offer the latest alloy rim from the leading Italian wheel manufacturer – OZ.

The OZ Racing Formula HLT makes lightweight racing wheels accessible to the domestic customer. The FORMULA HLT even looks like a racing orientated Centre Lock wheel with no visible bolts.

It’s sleek spokes not only offer more definition to the wheel design, but the added concave really enhances the aggressive nature of race/track inspired wheel designs. The slim spokes also allow better airflow to cool the brakes thereby minimising both fade under extreme use and unsprung weight.

The OZ Racing Formula HLT is available in size ranges from 17” to 19” and widths from 7J to 12J. Available colours are Grigio Corsa [Race Grey], Matt Black and Race Gold.

The OZ Racing Formula HLT starts at £263 per wheel – which includes VAT, delivery within UK mainland and a fitting kit [bolts and spigots].

M-Style can also offer wheel and tyre packages, fitting and balancing at competitive prices.

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

The team at GAZ has been producing dampers for a variety of rare classics recently. One case in point was a set of ride height and damper rate adjustable GP shock absorbers for a rather rare Renault Alpine V6.

GAZ GP dampers enable the damping rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.

GAZ GP dampers also feature an adjustable spring platform for ride height adjustment and they can also be specified with various spring seat sizes to suit the prefered coil measurements.

GAZ GP units have a gas cell fitted in the outer reservoir to prevent cavitation and resist fade under extreme use making them suitable for both for road and competition use. All units are available with a choice of bearings, bonded or polyurethane bushes and come with a zinc plated body for longevity.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ GP Dampers for the Renault Alpine V6 are available to order as part number GP8-4662 and retail at £97.76 each plus VAT.

GAZ can produce custom made dampers for many other rare classics by working from either the original specifications or the original dampers. Price is dependent on application.

For further details visit the GAZ website: www.gazshocks.com

When was the last time you saw a Granada Mk2?
It’s not something you see every day any more, but it’s reassuring to know that GAZ can still provide fully adjustable dampers if required.

GAZ dampers enable the damping rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.

GAZ dampers feature a zinc plated body for longevity and a plastic cover to protect the body from mud, stones and dirt.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ GT Dampers for the Ford Granada Mk2 are available as part number GT7-2059 and are made to order at £64.10 plus VAT.

GAZ can produce custom made dampers for many other rare classics by working from either the original specifications or the original dampers. Price is dependent on application.

For further details visit the GAZ website: www.gazshocks.com