Month: December 2018

Webcon has recently announced the relaunch of the Weber 40 and 46IDA3C carburettors as fitted to Flat 6 Porsche models; in addition to this, Webcon will be reinstating a large number of the original, genuine Weber parts for these models.

The first of these new parts are the throttle levers. These are authentic Weber parts reproduced from the original drawings and are available for both the left hand and right hand carburettors as follows:

Suits Reference Price
40 IDA3C 4503402700 £16.45 plus vat
40 IDA3C1 4503402800 £16.45 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is delighted to announce the introduction of a new Weber replacement kit to suit the classic Mercedes 220.

The new kit has been tailored for four cylinder models produced between 1968 and 1973. It replaces the often troublesome Zenith Stromberg 175CD with a genuine Weber 32/36 DGAV to give a more responsive and fuel efficient drive whilst retaining the original factory air box.

The Webcon Weber 32/36 DGAV replacement kit for the classic Mercedes 220 can be ordered as part number PME101 at a retail price of £595 plus VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Moss Europe is proud to announce that it can now offer MeisterR coilovers for the Mazda MX-5 (Miata).

MeisterR coilovers are one of the biggest names in aftermarket coilovers for the MX-5. They combine build quality, good looks, and excellent performance, all at a sensible price.

There are two versions of MeisterR coilovers: ZetaCRD and ClubRace,
ZetaCRD coilovers are designed for fast road use and use a softer spring and lower damping rates than the ClubRace, but perform very well on the road and are still capable of the occasional track day. The ClubRace coilovers are designed to maximise performance with high grip track day tyres and, as such, use a stiffer spring and higher damping rates than the ZetaCRD. Despite this they still perform very well on the road without being too harsh.

Both ClubRace, and ZetaCRD feature 32 way damping adjustment (compression and rebound combined), progressive damping with CRD (Close Ratio Damping) technology, and independent pre-load and ride height adjustment.

Generally, coilover suspension kits of this quality and technical excellence would retail at well over a thousand pounds, but, amazingly the MeisterR ZetaCRD range starts at just £769.00 incl. VAT (for Mk1 – Mk2.5). The Mk3 is £799.00 and the ClubRace rangeretails at just £869.00 for MX-5 Mk1 to Mk3.
For more information visit:
For more details contact Moss Europe Ltd, on +44 (0) 20 8867 2000
or visit their website: www.moss-europe.co.uk

Now Minis running 10” wheels can have the braking power of Cooper S 7.5” discs with Kevlar pads! You can even backdate a 12” wheel Mini to 10” wheels and still have effective braking.

The Mini Spares MSSK013MS kit contains: discs, calipers, Kevlar pads with split pins and drive flanges with new screws and Mini Spares own calipers.

The complete kit is currently available at the special price of £183.62 incl. VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style is delighted to announce that it can offer the latest in carbon styling from 3D Design for the BMW F90 M5. The first items to arrive are the Carbon Front Lip Spoiler and the Carbon Side Skirts.

The Carbon Front Lip Spoiler retails at £1968 inc VAT plus £160 inc VAT for fitting (if required).

The Carbon Side Skirts retail at £2136 inc VAT per pair plus £160 inc VAT for fitting (if required).

For further details visit the M-Style website: www.mstyle.co.uk
e-mail: info@mstyle.co.uk or call 0208 5989115

As official distributors of 3D Design products M-Style is pleased to announce that it is now stocking the dramatic new carbon front splitter for the very latest BMW 5 Series G30 and G31 models.

The splitter is made from genuine carbon fibre to combine strength and durability with ultra-lightweight and dynamic looks.

The 3D Design Carbon Front Splitter for the BMW 5 Series G30 & G31 models retails at £1349 inc VAT.
Fitting can be provided at the M-Style workshop for £72.00 inc. VAT.

For more details visit www.mstyle.co.uk or call 0208 598 9115.

When the Triumph Stag was new purchasers had the option of choosing uprated dampers, made by an outside company. So, even then, the manufacturers knew that improvements were possible and desirable. (In fact there were a lot of parts on the car where improvements were possible and desirable – but that’s another story!).

The car’s reliability problems hampered sales and the car never achieved the numbers envisaged. However, if you have managed to lay your hands on a surviving Stag at least you can bring the suspension up to scratch as GAZ are now offering adjustable, uprated dampers made to an even higher specification than the original optional versions.

The GAZ dampers offer on-the-car adjustable rebound at the front and on-the-car adjustable bump and rebound at the rear.

Various fixed bump rates are available for the front depending on whether the vehicle is to be used on the road or in competition.

The GAZ dampers feature a protective zinc plated body, all units are individually tested before leaving the factory and are covered by a two year warranty.

Front damper inserts are available as part number GAI-2334 at £92.19 each and rear dampers are part number GT4-2113, retailing at £60.67 plus VAT each.

For further details visit the GAZ website:
www.gazshocks.com

The Renault 172 and 182 Sport is still one of the most popular ‘superminis’ of the late Nineties and early ‘Noughties’ and still makes a great trackday car.

It’s just as well then that GAZ can offer GAZ Gold Suspension kits for the 172 and 182 to provide adjustable coilovers to lower the centre of gravity and adjust the bump/rebound of the damping.

The kit includes adjustable coilovers for both front and rear on which the ride height can be adjusted through 60mm. The coilovers have a coarse acme form thread for ease of height adjustment and to ensure that they remain in good order even after considerable service.

Damping rates are variable by means of an adjuster knob on the damper bodies. The GAZ Gold range is designed primarily for out-and-out racing so each comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under harsh racing and trackday conditions. Springs can be supplied to the customer’s specifications according to the vehicle’s intended use.

All the units are individually tested before leaving the factory. Although this kit converts the car to coilovers all round it is a direct replacement with no modifications necessary.

The GAZ Gold coilover kit for the Renault 172 and 182 Sport (1999-2001) can be ordered as part number GGA439 at £1013.38 plus VAT.

For further details visit the GAZ website: www.gazshocks.com

The iconic VW Karmann Ghia may be one of the best looking classic cars around but there’s no denying they look even better when they are lowered. With this in mind GAZ offer special short front dampers for lowered Karmann Ghia.

The dampers will also fit Beetles made from 1965-79 and Beetle 1300A and 1500A from 1967-79.

GAZ GT Dampers will provide variable bump and rebound rates which can be adjusted to suit the conditions and driving style. The damping rates can be altered by means of an easily accessible knob on the side of the units.

GAZ can set the dampers up for general road use and they will also be suitable for occasional track slalom and sprint use, or alternatively they can even be set up for serious racing use if you wish.

GAZ dampers feature a zinc plated body and protective plastic sleeve to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GT short front dampers for the VW  Karmann Ghia/Beetle can be ordered as GT6-5062 and retail at £58.46 each plus VAT

To find you local GAZ dealer visit the GAZ website:
www.gazshocks.com

Fidanza, Americaʼs leading performance flywheel specialists, has a direct replacement lightweight aluminium flywheel to improve the performance of the 2001/2002 BMW X5 3.0.

The Fidanza aluminium flywheel replaces the heavy standard flywheel and improves the power-to-weight ratio making the engine more responsive and improving performance and acceleration.

The Fidanza aluminium flywheel is made from high-quality machined 6061 T6 aluminium with a 1050 steel friction surface, CNC machined fastener holes and chamfers. The friction surface of the flywheel is a replaceable steel plate, so when the surface eventually becomes worn it can be replaced without requiring a new flywheel.

Fidanza flywheels are suitable for use with just about any clutch disc material available – from organic to Kevlar and even sintered iron. The flywheels are incredibly durable and come with a heat-treated ring gear and military grade fasteners. Fidanza flywheels are equally suited for fast road, trackday and pure competition use.

Flywheel for BMW X5 2001/2002 3.0 – order as part number 195461 at £305.24 plus tax and shipping from www.summitracing.com, or order online directly from www.fidanza.com.

SPECIAL DISCOUNT WHEN ORDERING DIRECTLY ONLINE: It is now possible to buy directly from Fidanza online and readers can obtain a 20% discount if they enter the promo code of “Fidanza” when ordering directly from Fidanza online – GIVING READERS A DISCOUNT OF  $109.22 ON THIS ITEM!!!.

For more information on Fidanza’s premium aluminium flywheels and other great products, call +1 440 259 5656 or visit www.fidanza.com