Month: March 2019

Webcon has offered a Weber manifold for the Rover V8 engine for some time, but with two carburettors positioned on each cylinder head this has proved a little too high for some applications.

Now, Webcon has revised the design and positioned the four Weber IDF carburettors in a line along the manifold between the heads, much like the early Aston Martin V8, creating an overall lower profile.

The manifold comes complete with linkage, cable and a stud kit. Order as part number MM4473 at £1699 plus vat.

A complete kit with four carburettors will be released later in 2019.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is delighted to announce the introduction of a range of anodised aluminium finish EFi regulators
to complement the blue and red versions already available.

The regulators are technically the same as the existing versions but are visually more appropriate for a ‘business like’ natural-metal engine-bay theme.

They are supplied complete with a mounting bracket and 8mm push-on unions.

Prices as follows

Pressure Part number Price
2.5 bar WFR225 £79.54 + vat
3.0 bar WFR230 £79.54 + vat
3.5 bar WFR235 £79.54 + vat
4.0 bar WFR240 £110.43 + vat
4.3 bar WFR243 £88.51 + vat
4.5 bar WFR245 £101.57 + vat
0-5 bar adjustable WFR205 £81.95 + vat

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

The German tuning house of Prior Design offers a complete wide body aerodynamic kit for the Mercedes CLK [W209] based on the results of racing and the experience gained in motorsports. The kit enables wider wheels and spacers to be used to improve stance, roadholding and handling.
The kit includes:
PD Black Edition front bumper
PD Black Edition rear bumper incl. diffuser
PD Black Edition side skirts
PD Black Edition front fender
PD Black Edition side panel widening rear
Mounting equipment
The rear bumper comes with integrated rear diffuser and pre-cut recesses ready for a 4-pipe / duplex exhaust system – which is also available from Prior Design.

The complete kit retails at £4995 including VAT and Prior Design UK can fit and paint the kit in the suggested Black Edition livery or to match the original body colour.
Fitting and painting at their UK fitting centre starts at £3000 incl. VAT.

This components are made from a quality GRP-Duraflex compound which is characterised by an excellent surface finish that provides sufficient flexibility combined with high stability and comes ready for painting. All parts are also available separately.

Optional extras:
PD Black Edition bonnet for Mercedes CLK [W209].
PD Black Edition Tailgate spoiler for Mercedes CLK [W209].

For further details visit the Prior-Design.co.uk website
or call 0208 5989115

M-Style has teamed up with Cobra Sport to offer a package of the latest Cobra Sport Quad Exhaust for BMW F32/F33/F36 435d and the MStyle diffuser which was developed especially for use with this exhaust system.

The package will fit the F32 (Coupe) and F36 (Gran Coupe). It can also be fitted to the M-Sport models but an additional dual exit panel will be required.
(NB: Not suitable for AdBlue editions and models with mounting point and strengthening bars).

This performance exhaust is made from 3″/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. The conversion allows owners to achieve the look of the more recognisable 440i’s dual exit exhaust on the more economical 435d diesel model.

The complete package of exhaust with quad T304 stainless steel tailpipes and an MStyle Performance Quad Exit Diffuser retails at £788.70 inc VAT. MStyle can also offer fitting at an additional £160 inc VAT.

For further details visit the M-Style website: www.mstyle.co.uk
or call 0208 5989115

The MOMO Mod.08 Steering Wheel – Blue Spoke – is now available in UK!

The MOMO Mod .08 Steering Wheel is designed for use in saloon and rally cars; the deep dish offers the driver maximum control and the yellow leather marker on the top provides a quick reference to the position of the steering.

The MOMO Mod .08 comes finished in either black suede or black leather. It features three blue aluminium spokes with a machined-out section and the MOMO Arrow logo on the horn button.

An aftermarket hub is required for installation.

All MOMO racing steering wheels are produced in Italy to the highest quality with anticorodal aluminium frames. The suede or leather covering is glued to the rim, instead of being stitched, to provide a seamless finish for greater comfort and durability.

Prices from: £221.99 inc. VAT

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.momo-uk.co.uk

Worn or damaged window rails can cause the glass to rattle, make winding difficult, allow rain to leak into the door causing rust and generally looks pretty scruffy.

Now, Mini Spares has produced its own direct replacement kit for Mk3 Minis with roll-up windows using stainless steel for the rail supports.

The kit contains parts ALA5746SS and ALA5747SS – a pair of drop rails – plus two 24A948 rubber seals for the drop rails to hold the glass firmly in place.

The kit can be ordered as part number MSSK2105SS. It is suitable for one door and retails at £36.32 inc vat.

These parts are also available separately.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

It’s important to keep a Mini’s steering and suspension gaiters in good condition to prevent road grit and debris from damaging the joint within. That’s why they should be replaced at the first sign of a split or perishing… and that’s the problem.

Original rubber gaiters are prone to splitting and if subject to oil contamination they can quickly perish.

Thankfully, Mini Spares has come up with polyurethane upgraded gaiters for all knuckle joints and many track rod ends. These will greatly reduce the chances of splitting and eliminate the problem of perishing.

It should be noted that this gaiter may not fit every track rod end because over the past 55 years there have been many ‘pattern’ track rod ends produced, but it will fit every genuine Mini suspension knuckle ball joint (part no GSV1118) ever made.

Order as 21A425EVO at £2.16 inc vat each.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Kent Cams has recently launched a brand new website that not only looks exciting but also enables users to find their way around more easily. You can search by vehicle or product type as well as part number.
Individual categories can also be searched
• Cam Belts and Chains • Camshafts
• Cometic Head Gaskets • Valve Guides and Shims
• Cam Followers and Tappets • Cam Sprocket Kits
• Bolts and Studs • Valve Springs
• Valve Spring Kits and Retainers • Oil Pumps
• Performance Kits • Pulleys

You can also find your nearest dealer worldwide and access the Kent Cams support team.
Visit the website at: www.kentcams.com

or contact Kent Cams on
+44 1303 248666 or e-mail: info@kentcams.com

The classic Volvo 240 can make an interesting and inexpensive retro cruiser but the suspension needs some attention first.

GAZ can offer a GAZ Gold Suspension conversion for the Volvo 240 that provides adjustable coilovers to lower the centre of gravity and adjust the bump/rebound of the damping. The conversion requires the original hubs that are then refinished to a high standard and incorporated into the new front struts, (see image).

The kit includes adjustable dampers on which the ride height can be adjusted through 60mm. The adjusters have a coarse acme form thread for ease of height adjustment and to ensure that they remain in good order even after considerable service.

Damping rates are variable by means of an adjuster knob on the damper bodies. The GAZ Gold range is designed primarily for out-and-out racing so each comes with a reservoir filled with a high viscosity index multi grade oil to reduce fade and a gas cell to prevent cavitation under harsh racing and trackday conditions. Springs can be supplied to the customer’s specifications according to the vehicle’s intended use.

All the units are individually tested before leaving the factory.

The GAZ Gold coilover conversion for the Volvo 240 can be ordered as part number GGA447 at £1013.58 plus VAT. Donor hubs will be required.

For further details visit the GAZ website: www.gazshocks.com

Although GAZ suspension is best known for its Ford, BMW and French applications, the company is equally skilled at turning its talents to Italian exotica such as the Maserati Khamsin.

The GAZ GP dampers shown here are suitable for both road and occasional track day use. The damper settings can be adjusted whilst on the vehicle by means of easily accessible knobs to provide the optimum settings for conditions, use and driver preference.

Ride height is adjustable all round by means of adjustable spring seats. Each damper unit is bright plated to resist corrosion.

GAZ GP dampers for the Maserati Khamsin can be ordered as part number GP8-5106 and retail at £120.75 each plus VAT.

All units are individually tested and provided with a test print out before leaving the factory and
come with the peace of mind of a two year manufacturer’s warranty.

For further details visit the GAZ website: www.gazshocks.com