Month: May 2019

Webcon now offer a range of show quality, round chrome air filters to suit the popular Weber twin choke downdraft carburettors.

The new filters are 9 inches (228mm) in diameter, 65mm high and feature a signature triple locknut that enables the top cover to be removed by hand for quick and easy filter element replacement.

The new filters are priced at £54.13 plus VAT each and are available to suit the following carburettors:

Weber DGV/DGAV/DGEV – DGAS/DGES/DGMS Part number AFB342
(The above is also suitable for use on the Webcon Retroject Throttle Body)
Weber DFAV/DFEV – DFE/DFM/DIR Part number AFB378
Weber ADF/ADM Part number AFB392

A replacement element is available separately as part number AFR342 priced at £23.73 plus VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

The Webcon WFP502 fuel pump is a low pressure, high flow pump designed to work with Weber carburettors without the need for a separate fuel pressure regulator.

It is capable of supplying fuel to everything from a single Weber ICH on a Ford Fiesta up to triple Weber 45DCOE on a 4.2 Jaguar. The WFP502 is a superb quality, American made pump that is silent in operation and ultra reliable.

The WFP502 is supplied complete with an intake filter, mounting bracket, flexible connecting hoses, clips and electrical connectors.

The WFP502 is ideal for road and race alike and is priced at just £59.95 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is pleased to announce that it is now stocking the superb quality Blue Thunder quad Weber IDA intake manifold for the classic Chevrolet small block V8 engine.

The manifold can be ordered as part number 9900890100 and is perfect for both Weber carburettors and IDA style throttle bodies.

The Webcon 9900890100 manifold is priced at £825.10 plus VAT.

Webcon recommend the Webcon 9900790000 linkage set, priced at £156.57 plus VAT, for use with this manifold.

Both items are available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Most us are familiar with the theory of a limited slip differential even if the technicalities are a bit of a mystery. If one wheel looses grip and spins a LSD will supply drive power to the wheel that still has grip, unlike an ‘open’ diff where the spinning wheel will continue to spin and the wheel that has traction will stop turning.

There are many technically different LSDs available, but, after exhaustive tests, MStyle has decided to offer American made Wavetrac differentials to its customers and is reinforceing its belief in the product by offering an introductory 5% discount on supply and fitting.

The unique patented feature that sets Wavetrac apart from other LSDs is the speed at which it reacts to a wheel lifting or the transition from acceleration to deceleration when there is near zero torque at the axle. Wavetrac’s ring of helical gears and wave shaped carbon fibre bias plates react to the half shafts turning at different speeds, rapidly causing each wave surface to climb the other thereby moving them apart.

This, very quickly creates enough internal load within the Wavetrac to apply torque to the wheel on the ground thus keeping the vehicle moving under power without wheelspin.

MStyle offer Wavetrac kits for most modern BMW and MIni models and all come with a limited lifetime warranty and ARP bolts as standard. Prices vary with application so call 0208 598 9115 or email info@mstyle.co.uk for details and prices.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

A performance petrol engine exhaust sound from your Diesel!

Although modern Diesel engines have great tuning potential nothing quite matches the exhaust sound of a performance petrol engine…. until now.

The Active Sound Booster Kit consists of a module and speaker unit that mounts to your existing exhaust system and is controlled via the Active Sound Gateway app on your smartphone. The result is a performance petrol engine sound from your Diesel’s exhaust!

You can even customise the sound and pitch as well as other features. These can then be saved as profiles and controlled from your phone or in-car buttons.

MStyle offer the Active Sound Booster Kit for most Diesel BMW models. You can see and hear several demonstrations of them in action on the MStyle UK YouTube channel.

Price £1295 inc VAT + £360 fitting

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

MOMO has just released a collapsible steering wheel hub kit for the 2011-onwards VW Up!, Skoda Citigo or Seat Mii. The MK8017R hub kit will enable an aftermarket steering wheel with a 6 x 70mm PCD to be fitted to any of these models.

The hub kit is produced in Italy from cast aluminium and includes a convoluted grained plastic cover and a set of fixing bolts.

Prices from: £81.59 inc VAT.

MOMO is the company that invented and market-launched the first collapsible steering wheel hub that we use today. Compared to a rigid hub, a collapsible hub can absorb outstanding impacts thanks to a programmed deformation, thus dramatically increasing the safety level in case of a collision. With the largest hub kit application catalogue in the industry, offering fitments for hundreds of different vehicles, there is no need to look any further for your hub kit than the pioneering MOMO range.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.momo-uk.co.uk

After many years of being adjusted countless times, the screws on many classic car distributors can become worn and damaged. Frequently they are lost and replaced with non standard screws.

Now Mini Spares can offer replacement screw sets for Mini distributors that include all the correct fixings for the particular distributor type.

For 23/25D Distributors order as 17H5106. The kit contains all of the screws needed to fix the condenser, points and base plate to 23/25D distributors.

For 45D Distributors order as 57H5135. The kit containsall of the screws needed to fix the condenser, points, base plate and vacuum to 45D distributors.

Both kits retail at £1.80 incl. VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

The Porsche 944 was Porsche’s go-it-alone development of the VW-Audi-Porsche project that produced the 914 and 924. Unlike it’s predecessors the 944 was 100% Porsche powered although Porsche did have to pay a license fee to MItsubishi for the use of their balance shaft design.

The 944 still provides a great entry level Porsche and a classic alternative to the more modern Boxster. To give the classic 944 more modern handling GAZ can offer bounce and rebound adjustable high performance dampers. The dampers are ideal for classic racing and come with valving to suit. Alternatively GAZ can provide very similar dampers specifically for road and trackday use.

GAZ dampers will not only modernise your 944’s handling, but will also serve you well for many years to come. The black plated body and durable plastic sleeve will protect the dampers and keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ GT dampers for all models of the 1981-8/84 Porsche 944 can be ordered as GAI 2008 for the front at £92.19 + VAT each and GT5-2197 for the rear at £67.28 + VAT each.

For further details visit the GAZ website:
www.gazshocks.com

The factory suspension of the Mazda RX-8 drew favourable comments right from the launch of the model, however some special edition models came already fitted with aftermarket performance dampers indicating official acknowledgment that there was potential for improvement of the factory suspension.

Now owners of regular RX-8 models can benefit from performance suspension thanks to GAZ adjustable coilovers. The fully adjustable coilovers will lower the centre of gravity and adjust the bump/rebound of the damping.

The ride height can be adjusted by means of threaded spring platforms that have a coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

Damping rates are variable by means of an adjuster knob on the damper bodies. Springs can also be supplied to the customer’s specifications according to the vehicle’s intended use.
All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ front coilovers for the RX-8 will also fit the Mazda MX-5 Mk3 and can be ordered as part number GP8 5092. Retail price £159.53 plus vat. GAZ rear dampers are also available.

For further details visit the GAZ website: www.gazshocks.com

If you have been to any of the big international classic car shows recently you will know that ‘modern’ classic Jaguars (modern reproductions of models like the XK140 and XK150) are big business at the moment.

However, you don’t need to buy one of these modern repros to obtain modern ride and handling. GAZ can now offer bounce and rebound adjustable high performance dampers for the original classic Jaguar MkVII, MkVIIl, MkIX, XK140 and XK150 models. The dampers are ideal for classic racing and come with valving to suit. Alternatively GAZ can provide very similar dampers specifically for road and trackday or rally use.

Naturally you will want to preserve your classic and all the parts you use on it and GAZ dampers will serve you well for many years. The gold passivated or black plated body and durable plastic sleeve will protect the dampers and keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GT6-2103 GT front dampers fit Jaguar Mk7, Mk8, Mk9, (1950-1961) XK140 and XK150 models (1954-61) and retail at £60.67 each plus VAT. Rear dampers are available as part number GT6-2107 also at £60.67 plus VAT each. Prices quoted are for gold passivated finish as shown. A black plated ‘classic’ finish is also available at extra cost.

For further details visit the GAZ website:
www.gazshocks.com