Webcon Inlet Manifold for fitting single Weber DCOE to MGB ‘B’ Series Engine 

Now MGB owners (and kit car owners using the later ‘B’ Series engine) can enjoy the performance, reliability and ‘tuneability’ of a single Weber DCOE carburetter or DCOE pattern throttle body.

The Webcon MGB Single DCOE Manifold is a single piece casting that comes with threaded ports for sensors and/or brake vacuum take off and mounting points for throttle linkage brackets.

The Webcon MGB Single DCOE Manifold can be ordered as part number MT0033R at £195.55 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon Intake Unions for Weber DCOE Carburettors

Some of the most critical and most overlooked fuel connections on a Weber DCOE setup are the
intake unions. If these are anything less than 100% it could result in a serious fuel leak and possibly even an engine fire.

Webcon has always sold the individual parts, but the process of overhauling these parts has now been simplified by the introduction of three new fuel union kits.

Each kit contains: top quality fuel unions, banjo bolts, fibre washers and hose clamps. These ensure a perfect, professional fuel union overhaul on any single, twin or triple Weber DCOE or DCO/SP installation.

The part numbers and prices are:

Single DCOE Union kit FK00051 £27.49 plus vat
Twin DCOE Union kit FK00052 £54.95 plus vat
Triple DCOE Union kit FK00053 £84.95 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon Choke Cable

A correctly operating choke cable will maximise the cold start performance of any manual choke carburettor and Webcon have been manufacturing and supplying the finest quality choke cables for over forty years.

Now there is a range of four different lengths and inners to suit almost all front engined applications and all are manufactured to Webcon’s exacting quality standards.

The range details are below:

Part Number Length Outer Length Inner Inner type Price
9990087400 54 Inch 57 Inch Bowden cable £18.72 plus vat
9990102300 72 Inch 78 Inch Bowden cable £19.12 plus vat
9990203400 54 Inch 57 Inch Piano wire £15.45 plus vat
9990221500 90 Inch 96 Inch Piano Wire £16.49 plus vat

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

MOMO Hub Kit – VW Caddy (2k) 2003 onwards

Now it’s possible to fit a MOMO (or similar) aftermarket steering wheel to a VW Caddy pick-up or van thanks to the new MOMO collapsible hub kit which is suitable for the 2003-onwards VW Caddy (2k).

This MOMO collapsible hub kit can be ordered as part number MK8017R and includes a set of fixing bolts for attaching any aftermarket steering wheel with a 6 x 70mm PCD.

The MK8017R MOMO collapsible hub kit is produced in Italy from cast aluminium and retails from: £81.59 inc VAT.

MOMO is the company that invented and market-launched the first collapsible steering wheel hub that we use today. Compared to a rigid hub, a collapsible hub can absorb outstanding impacts thanks to a programmed deformation, thus dramatically increasing the safety level in case of a collision. With the largest hub kit application catalogue in the industry, offering fitments for hundreds of different vehicles, why look any further for your hub kit than the pioneering MOMO range?

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.momo-uk.co.uk

Mini Spares – Gold Magnetic Sump Plug

Car Photography, Automotive Pictures Published in Magazines – News Papers

Keeping your oil clean is especially important when your engine and gearbox share the same oil. Mini Spares can help with the Gold Magnetic Sump Plug which traps any tiny and potentially damaging metal particles that may be floating in your classic Mini’s oil to keep them safely out of the way until the next oil change.

This extra strong magnetic sump plug is constructed from 303 stainless steel and houses the latest super strong Neodymium magnet. This is currently the strongest type of magnet available for its size and is easily capable of lifting a whole packet of steel washers!

This sort of power will certainly provide your engine with the best protection possible.

Order as part number DP3.
Retail price: £18.25 inc VAT
(Overseas prices: Euro: 21.81€
AUS $33.22, US $25.55)

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Mini Spares New Primary Gear Thrust Washer for 1275cc Minis

On an ‘A’ Series engine the primary gear thrust washers are made in varying sizes to take up any play.

The standard gap size should be between 3-6 thou., but Mini Spares offers various shims (DAM6486-7-8-9-90-92) as alternatives which step up in two thou. increments (which is the recommended tolerance).

Now Mini Spares has introduced a new thrust washer for the 1275cc crankshaft – part number DAM6492 – which is wider in width, to counteract wear. DAM6492 is 122-124″ thick making it the thickest shim available in this range.

Retail price £29.40 including VAT.
(Overseas prices: Euro: 33,52€
AUS $53.51, US $41.16)

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style H&R Springs and spacers for BMW F22/F23

If you are looking to lower your BMW F22 or F23 to reduce the centre of gravity and minimise body roll, M-Style can now offer H&R Sport Spring Kits from just £246 incl. VAT. The progressive spring rate design provides superb ride quality and comfort as well as enhancing the look of your vehicle with a reduced arch gap.

M-Style can also help the look of your vehicle even further.

Why not fit the springs and spacers together?

M-Style is currently running a fantastic offer on lowering springs and spacer package deals at its BMW specialist workshop in Essex. Prices start from £379 inc VAT and fitting.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

M-Style G Power Supercharger Kit for E9x M3

The G Power SK III RR Supercharger System from M-Style will boost the power output of a BMW E90 series M3 by over 70% from 414hp to an eye-watering 710hp. Torque is also increased from 400Nm to 650Nm.

Thanks to comprehensive testing and development, CAD design and CFD analysis the ASA compressor delivers linear pressure build up in line with rpm to provide a smoother power delivery.

With added components such as a carbon air intake and cast aluminium airbox, finished in G Power’s vibrant orange, this system is a stunning show piece not just for flaring out on the track.

G Power Supercharger kits are modular and upgradeable, meaning you can start with the smaller kit (SK I at 494hp) and then opt for more power at a later stage. Modules are also available for other BMW models. Prices vary with modules and power levels, so contact M-Style for full pricing details.

As the UK dealer for G Power, M-Style not only supplies G Power products but can also provide installation of the kits at its BMW specialist workshop in Essex.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

GAZ Adjustable GP Dampers for the Volvo 940 range

The boxy styling of the 1990 to 1998 Volvo 940 range is once again fashionable, especially when lowered. The cars were solid, quite luxurious and well built. They handled well and the turbos were pretty quick, even by today’s standards. So, a car well worth preserving? If you think so then GAZ can further improve on the handling (and even the looks) with a set of GT adjustable dampers.

GAZ GT Dampers provide variable bump and rebound rates which can be adjusted by a single knob on the side of the units through twenty points to suit the conditions and driving style.

GAZ can set the dampers up for general road use and they will also be suitable for occasional track slalom and sprint use; alternatively they can even be set up for serious racing use if you so wish.

Naturally you will want to preserve your 940 and all the parts you use on it and GAZ dampers will serve you well for many years. The gold passivated or black plated body and a durable plastic sleeve will protect the dampers and keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

Order as GT7 5221(Rear) at £67.31 each + VAT & carriage
GAZ can also provide front struts to a similar specification using donor stub axles.

For further details visit the GAZ website: www.gazshocks.com

GAZ Gold Pro Suspension for Mazda MX-5 Mk1

GAZ now offers a GAZ Gold-Pro suspension kit for the Mazda MX-5 Mk1.

Gaz Gold Pro Kits are a premium range of suspension units designed for fast road, track day and tarmac motorsport use.

They are manufactured from high tensile alloy with induction hardened piston rods and have a multi point adjustable control knob to adjust bump and rebound.

These units are filled with high viscosity index fluid to alleviate cavitation and have an internal gas cell to help prevent fade. In addition to this the Gaz Gold Pro range are offered with self lubricating spherical bearings and progressive bump stops.

GAZ Gold-Pro Kits for the Mazda MX-5 can be ordered as part number GGP448 at £654.05 + carriage & VAT.

For further details visit the GAZ website:
www.gazshocks.com