Webcon Manifold & Linkage Kit for Datsun 240Z/260Z

Webcon UK Ltd is pleased to announce the launch of a manifold and linkage system to allow fitment of twin 32/36 or 38/38 Weber carburettors, or Retroject EFI throttle bodies to the Datsun 240Z and 260Z.
 
Replacing the existing carburettors fitted with a 2 inch square flange, the new system is perfect for those looking to upgrade the performance of their Z, but who do not want to invest in the ultimate Weber DCOE package.
 
Part number 9900283100 is available separately priced at £485 plus vat, or complete with Authentic Spanish Weber carburettors and air filters as below:
 
PDA201 2 x 32/36 DGV Manual choke carburettors £908.65 plus VAT
PDA202 2 x 32/36 DGEV Electric choke carburettors £935.58 plus VAT

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon Distributor Caps and Rotor Arm for Sierra Cosworth 2wd and 4wd

Webcon UK Ltd is pleased to announce the introduction of distributor caps and rotors for the Sierra Cosworth 2WD and 4WD.
 
The new parts are superbly manufactured to Webcon’s exacting quality standards, and will allow the owners of these high powered classics to maintain their ignition systems and ensure the very highest levels of performance.
 
The new Webcon distributor caps and rotors are available as follows:
 
Part Part Number Suits RRP
Distributor cap WDC278 Sierra Cosworth 2WD £24.64 plus vat
Distributor cap WDC280 Sierra Cosworth 4WD £13.32 plus vat
Rotor Arm WRA203 Sierra Cosworth 2WD & 4WD £9.22 plus vat

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Mini Spares Mk1 Air Intake Hose (rubber over wire)

Mini Spares now has an air hose for the Mk1 Mini and variants that is an improvement on the original design. The original tube was made of a rubber material wrapped over a wire coil.
The Mini Spares version is also composed of rubber but this is bonded to a nylon interior membrane for additional strength which results in a stiffer hose overall. An additional modification in the Mini Spares version is that the wire coil is galvanised. The surface finish of the rubber is smoother than original and has a slight shine, but this dulls after it has been under the bonnet for a while.

According to Mini parts books the original length was 45 inches for standard Minis and 47 inches for the S. The Mini Spares hose is about 49 inches (give or take 1/2 an inch) so you have a bit more length to play with. The Mini Spares hose can be ordered as part number 24A1256 and will replace original hoses 24a1975 or 24a1256. Retail Price: £70.64 inc VAT

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Mini Spares 7” LED Headlamps

Now your Mini (or most other classics with 7” diameter headlamps) can have the benefits of modern LED headlamps with halo rim rings thanks to a range of direct replacement headlamp units from Mini Spares.

The headlamps are all E marked and road legal in the UK and Europe. They are available in a choice of black or chrome finishes and can be supplied for left or right hand drive vehicles.
Part number Finish Offset Retail Price
S7096LED Chrome Right Hand Drive £420.00 inc. VAT
S7098LED Chrome Left Hand Drive £420.00 inc. VAT
S7099LED Black Left Hand Drive £420.00 inc. VAT
S7097LED Black Right Hand Drive £420.00 inc. VAT

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style Black Performance Look Grilles for BMW G20 and G21 models

M-Style now has a choice of two new performance look black grilles to enhance the look of BMW G20 and G21 models.

The easy to fit, direct replacement grilles are available in either gloss or matte black. The Gloss Black version retails at £64.95 inc. VAT and the Matte Black version is £59.95 inc. VAT.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

M-Style CSF Cooling Package for BMW E90/E92/E93 M3

M-Style now has a complete cooling package solution for E9X M3 cars. This is particularly suitable for those that have been subject to power upgrades and/or are used to their full potential on the track. The kit is made from aircraft quality aluminium and comprises: an engine water radiator, engine oil cooler, DCT gearbox oil cooler and a power steering fluid cooler.

Aluminium is the modern material of choice for cooling. It is stronger than copper or brass so can provide a thinner tube wall thickness which improves heat transfer. It can also perform the cooling task with fewer cores so the rearmost cores don’t struggle to cool with hot air transferred from the frontmost cores.

The complete CSF Cooling Package retails at £2449 inc. VAT.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

GAZ Adjustable Front Dampers for Saab 900

The Saab 900, with its double wishbone suspension at the front, puts a lot of stress on its dampers but replacing them with GAZ adjustable units will improve performance, longevity and handling.

GAZ GT Dampers provide variable bump and rebound rates which can be adjusted to suit the conditions and driving style. The damping rates can be altered by means of an easily accessible knob on the side of the units.

All units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ GT front dampers for the Saab 900 retail at £71.73 each plus VAT

For further details visit the GAZ website: www.gazshocks.com

GAZ Coilover Suspension for Rover Coupé Turbo

The Rover 220 Coupé Turbo of the Nineties is reckoned to be the fastest ever production Rover and with a top speed of 150 mph (241 km/h) and a 0-60 mph time of 6.2 seconds (according to a1992 Autocar test) it’s a pretty quick car even by today’s standards.

However, it’s unlikely that the handling and suspension performance will be up to the same standards after all this time so GAZ Shocks is now offering an adjustable coilover kit for the Rover 220 Coupé Turbo (and the naturally aspirated 220 Coupé).

Ride height is variable by means of height adjusters with coarse acme form thread for ease of adjustment. Damper units are zinc plated to ensure that they remain in good order even after considerable service.

Damper rates are also variable by means of an adjuster knob on the damper body.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GHA Coilover Kit for the Rover 220 Coupé & Coupé Turbo can be ordered as part number GHA373 and retails at £626.27 plus. VAT per kit.

For further details visit the GAZ website: www.gazshocks.com

GAZ Gold Coilover Suspension for Ford Sierra and Escort Cosworth 4×4

GAZ Shocks is now offering a GAZ Gold fully adjustable suspension kit that is suitable for both the Ford Sierra Cosworth 4×4 and the Escort Cosworth 4×4 models.

Ride height is adjustable through 60mm of adjustment. The damper units are plated with black zinc and fitted with anodised adjusters for long life. The height adjusters have a coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

Damper rates are also variable by means of an adjuster knob on the damper body. The GAZ Gold range comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing and trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ Gold Coilover Kits for Ford Sierra and Escort Cosworth 4×4 retail at £975.52 plus. VAT per kit.

For further details visit the GAZ website: www.gazshocks.com

GAZ Coilover Suspension for BMW E21 – now with Helper Springs

Leading suspension specialists GAZ now offers its coilover suspension with helper springs as an option as shown on this BMW E21 classic 3 series kit.

Helper springs keep the main suspension springs under tension when the car is jacked up and prevents the main spring from becoming unseated. The helper spring option is most useful for race or track day cars where the vehicle is jacked up and tyres changed frequently; however it is possible for the suspension spring to unseat from just one jacking and as such it is worth considering for street vehicles.

Naturally this E21 suspension includes all the established GAZ features like ride height adjustability from -25mm to
-55mm.

The adjusters have a coarse acme form thread for ease of adjustment and the units are zinc plated to ensure that they remain in good order even after considerable service.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GHA Coilover Kit for BMW E21 retails at £717.01 plus. VAT.
Helper springs with connectors are £15.00 each plus VAT.

For further details visit the GAZ website:
www.gazshocks.com