FOLIATEC®.com offers a range of 25 different Brake Caliper Lacquer colours. Each can comes with a brush but for those who demand smooth perfection the new Brake Caliper Lacquer Thinner allows the Brake Caliper Lacquer to be sprayed on.
FOLIATEC®.com Brake Caliper Lacquers are heat-resistant and seal and preserve the surface. This makes them not only look good for much longer but they also protect brake calipers from chemicals, rust and oil.
Now you have a choice of applying the thick lacquer easily and precisely with a brush or thin to an ideal viscosity with FOLIATEC®.com’s specially developed Brake Caliper Lacquer Thinner and use a spray gun.
FOLIATEC®.com’s Brake Caliper Lacquer Thinners will also be ideal for throughly cleaning your spray gun after use. The RRP is £6.99
The 1996-on Citroen Saxo and Peugeot 106 are still popular track day cars and are ripe for modifications – non more so than in the handling department.
GAZ adjustable strut inserts enable the damping rate to be adjusted to suit the conditions and driving style by means of an easily accessible removable knob on the top mounting pin.
GAZ set the inserts up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use.
GAZ strut inserts feature a zinc plated body to keep them looking good and working well for long into the future.
All units are individually tested before leaving the factory and are covered by a 2 year warranty
GAZ adjustable strut inserts for the Citroen Saxo and Peugeot 106 retail at £87.80 each plus VAT.
Order as part number: GAI3004
The later Cortina models don’t seem to have the same following as the Mk1 and 2. Maybe it’s something to do with the handling not being as sharp? If so, GAZ can help with that problem as fully adjustable GT dampers are now available for the Cortina Mk 3, 4 and 5.
GAZ fully adjustable GT dampers enable the damping bump and rebound rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.
GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.
GAZ GT dampers feature a zinc plated body and have a protective plastic sleeve to keep them looking good and working well for long into the future.
All units are individually tested before leaving the factory and are covered by a 2 year warranty
GAZ adjustable dampers for the Cortina Mk 3, 4 and 5 retail at £57.78 each plus VAT.
Order as GT6-2059 for front and GT6-2060 for the rear.
These rear dampers will also fit estate car versions.
The team at Fidanza has just come up with a lightweight flywheel for the RS4 B5 series 1997-2002 but which also fits the B5 series S4, that will deliver the following benefits:
• Faster throttle response and quicker acceleration
• Additional horsepower to the wheels (reduced parasitic losses)
• Smoother, faster shifting
• Easier braking, better slowing (due to reduced rotational mass)
• Reduced clutch wear and improved efficiency (from better heat dissipation)
• Cost savings and longevity (thanks to Fidanza’s replaceable green friction plate – no need to replace
entire flywheel when worn)
• Potential for increased fuel economy (if you can keep your foot off the gas!)
• Quality and reliability (made in the USA from top grade materials)
The Fidanza flywheel can be ordered as part number 112621 at USD $546.12 plus shipping and tax.
For more information on Fidanza’s aluminium flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com
In the UK Fidanza products can be ordered through Cambridge Motorsport Parts or Fensport.
Crawl underneath or look under the bonnet of almost any modern car and you’ll find dimpled aluminium heat shields protecting the passenger compartment and delicate components from heat. Now, thanks to DEI, you can have that same protection on your classic, street rod, camper van, boat or kit car.
DEI’s Form-A-Shield is made from 10mm thick dimpled aluminium with a ¼” (6.35mm) thick high temperature basalt insulation. Form-A-Shield can withstand direct temperatures in excess of 1400˚F (760˚ C) so it can be applied directly to high temperature sources such as exhausts and turbos.
It can be easily moulded to fit around cast exhaust manifolds, pipes and silencers and provides outstanding performance in reflecting and blocking heat.
It can be fixed in place to floors, panels and firewalls with DEI’s 010490 Spray Adhesive or mechanically fastened with DEI metal ties.
DEI’s Form-A-Shield is available in two sizes:
Part number: 050516 42” x 48” (106.68cm x 121.92 cm) USD $175.26 MSRP and
Part Number: 050517 21” x 48” (53.34cm x 121.92 cm USD $90.67 MSRP.
Burton now offers a complete dry sump kit to fit Ford Duratec HE14 engines. The kit is a single pressure, single scavenge dry pump kit and eliminates the need for an external pump, pulley and belt drive (the big problem area for more conventional dry sump arrangements).
This dry sump kit has been designed with the assistance of one of motor sport’s best engine designers and is perfect for all inline applications from road to full race.
Although there are other kits that place the pump internally in the sump this kit benefits from a lengthy, in-depth development and the lessons learned from other kits. The result of this design, research and development is a kit that is superior in both value for money and performance.
The kit measures 440mm in length, 310mm width and just 75mm in height. It is available for 2.0, 2.3 and 2.5 Duratec engines. Order as FD200 for 2.0, FD201 for 2.3 and FD 202 for 2.5. All retail at £1074.00 per kit incl. VAT.
for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
Burton now offers a cast aluminium replacement ‘Duratec-R’ cam cover which has been designed to fit all standard Ford 2.0, 2.3 and 2.5 Duratec HE I4 engines.
The cam cover can also be used on VVT Duratec engines but only when the variable valve timing gear has been removed. The cam cover is for use with a Ford coil pack and plug leads – coil-on-plugs cannot be used because of space limitations.
The cam cover is 65mm in height which will give a 2.3 or 2.5 Duratec engine the same overall height as a standard 2.0 engine with the original Ford cam cover.
The cam cover comes in a cast finish but can be painted or powder coated if desired.
A spun aluminium filler cap is also included.
The ‘Duratec-R’ aluminium cam cover kit includes: sand cast aluminium cover, spun aluminium filler cap, internal baffle tray, plastic filler cap key, complete o-ring seal set and fittings.
Order as part number :FD230 at £365.63 including VAT.
for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
The B-G Racing Mechanics Work Mat provides a stable and comfortable platform which is perfect for working in the garage or pit lane, allowing users to lie comfortably when working on the vehicle.
This Work Mat is the perfect companion for everyday tasks and particularly for mobile mechanics working at the roadside.
These mats are produced from a high quality 30mm thick heavy-duty EVA composition which is water and impact resistant and feature an integrated carry handle.
Features:
• Easy Storage & Transportation
• Water & Impact Resistant
• Integrated Carry Handle
• Thick Foam for Comfort
• Proven Racing Pedigree
• Perfect Garage Companion
• Great for Outdoor Activities
Price £35.99 inc.VAT (£29.99+VAT )
For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk