Month: December 2023

The latest new product from Webcon for the classic Porsche 911 is an air filter to suit the Weber 40 and 46IDA3C caburettors.

Manufactured by Webcon in the UK, the top, base and posts have been machined from billet aluminium which has then been black anodized. The element is reuseable, thus saving on future service costs, and is capable of trapping minute contaminating particles. This combination ensures the quality of this new filter Is superb, and it will not look out of place in the engine bay of any flat 6 Porsche.

Air Filter part number AFB4340 works perfectly with Webcon’s new Porsche IDA3C intake manifolds, throttle linkage system and, of course, the newly reintroduced, genuine Weber 40 and 46IDA3C carburettors.

AFB4340 is extremely competitively priced at just £149.50 plus VAT and is available directly from Webcon or from its global network of dealers.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Excessive fuel pressure causing flooding is becoming a common problem on new or recently rebuilt carburettor set ups. This can happen either with an electric fuel pump or when a cheap copy of an original mechanical fuel pump produces way more line pressure than the intended 3 to 3.5 psi. This problem is especially common on Ford and Volvo engines.

The solution is to install a Webcon Fuel Pressure Gauge.

Webcon part number WFR150K includes a superb quality 0-15 psi fluid filled fuel pressure gauge with a Webcon manufactured anodised 8mm 5/16” billet aluminium fuel line adaptor and plug, together with a couple of OEM quality hose clamps. All at an ultra competitive price of £34.95 plus VAT.

For vehicles with an EFI system, Webcon has the WFR151K gauge kit which features the same superb quality fuel line adaptor and clips, but includes a 1-8 bar gauge so that the EFI fuel pressure can be measured and set prior to mapping. The WFR151K gauge kit retails at £37.95 plus VAT.

Fitting either of these new kits is extremely easy. A blanking plug is included in the adaptor so that the fuel gauge can be removed after set up or left in place for continual monitoring.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Mini Spares is pleased to announce a new version of its lightweight alloy radiator which comes with a fan sensor hole and new switch for post 1991 classic Minis.

This is an upgrade of the popular ARP1110 radiator (which has sold 800 in three and a half years and had great sucess in both racing and in the Mini Spares eight port head cars). The new radiator boasts all the same features as the ARP1110, such as:

An original shaped header tank manufactured by using new cuprobraze technology which has the advantages of better thermal performance, corrosion resistance, strength and durability plus it is greener for the environment to produce.

Designed for use with distilled water to stop galvanic corrosion caused by cast iron components such as engine block, cylinder heads and water pumps.

Finished in black to look original.

Order the Mini Spares lightweight alloy radiator with fan sensor switch as part number ARP1111 at £74.89 inc. VAT.

Mini Spares ARP1111 lightweight alloy radiator is suitable for all post 1991 classic Minis except Australian market cars, which had different hose outlets.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style is now offering a GTS Style Bonnet with fully functioning air scoop for the BMW F80 M3 and the F82 M4.

The bonnet is metal with a plastic vent and is supplied unpainted. Retai price is: £1095 inc. VAT supplied unpainted (considerably less than the cost of a genuine GTS bonnet!).

M-Style can provide a fitting and painting service at its Romford based workshops for an additional £550 inc. VAT (slightly more if any blending is needed).

­For further details and component prices e-mail info@mstyle.co.uk or call 0208 598 9115

GAZ Shocks can now offer coilover kits for the both the Mk1 and Mk2 Porsche Boxsters. The kits offer adjustable ride height and adjustable damper rates and include lowered, uprated, suspension springs.

Ride height is adjustable all round through 60mm of adjustment; the struts and damper units feature the new GAZ black zinc protective finish as well as sporting the new white GAZ logo.

The height adjustable platforms are anodised for long life. They also have a coarse acme form thread for ease of adjustment; to ensure that they remain in good order – even after considerable service. Damper rates are variable by means of easily accessible adjuster knobs.

The GAZ Gold range comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing and trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty for road use cars (not valid for competition cars… but Gaz does offer a rebuild service).

Both Mk1 and Mk2 GAZ Gold Coilover Kits for Porsche Boxster retail at £1656.56 plus. VAT per kit.

For further details visit the GAZ website: www.gazshocks.com

GAZ Shocks is now offering a complete suspension kit for the latest Ford Focus ST. The kit provides height and damper rate adjustment and competition quality performance.

GAZ damper units allow damping adjustment whilst on the vehicle by means of easily accessible adjuster knobs on the body of the damper.

Shortened body and stroke lengths allow a -25 to -55mm ride height variation with a coarse acme form thread provided for easy adjustment. Coilover struts are provided for the front with adjustable spring platforms for the rear.

Each unit is plated in Classic Black Zinc to minimise corrosion and to ensure that the height adjusters will go on working for many years to come.

All units are individually tested before leaving the factory and are covered by a two year warranty for road use cars (not valid for competition cars… but Gaz does offer a rebuild service).

GAZ Gold Suspension Kit for the Focus ST can be ordered as GGA-485 and retails at £1106.24 plus VAT.

For further details visit the GAZ website: www.gazshocks.com

Fidanza is best known for its lightweight aluminum flywheels but the company now also offers a performance shifter for the popular 1983-2003 Ford Mustang with T-5 or T45 transmission.

Fidanza Short Throw Shifters are designed as a direct, bolt in, factory replacement and reduce throw by up to 40% for faster shifts.

Fidanza short shift kits are precisely made with 6061 aluminum and hardened steel and manufactured with the same precision and to the same quality as Fidanza flywheels.

The Fidanza Short Throw Shifter for the 1983-2003 Ford Mustang can be ordered as part number – 891839 at $110.87 plus shipping and import tax.

For more information on Fidanza’s short throw shifters, aluminum flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com

For further details contact sales@fidanza.com

In response to popular demand, Burton Power has gone back to its roots and produced a limited edition Classic Sticker Sheet of original Burton graphics as used by the company in the 1970s and 1980s.

The stickers are authentic, right down to the now-defunct telephone number and would be the ideal period addition to classic cars, workshop or toolbox.

The A4 sized sheet features eleven stickers in total and can be ordered as part number CLASSICSTICKER1 retailing at £5.00 (inc VAT).

For further details contact Burton Power on 0208 554 2281 (and NOT the number shown on the stickers!)
www.burtonpower.com

Burton Power now has quite a selection of parts from GRP4 Fabrications for early Ford Escorts and the list is forever growing.

The latest addition is a pair of lightweight exterior door handles for the Escort Mk2.

These door handles have been machined from billet aluminium, which makes them stronger than the original castings but also super light (less than half the weight of the original Ford handles!)

The door handles feature lightening holes for added weight saving as well as giving them a purposeful racing look.

Because they are intended for competition vehicles the handles have no provision for fitting a key lock. The key holes are dummies for effect only. However, the handles could be used on a road car (or kit car) if combined with remote control central locking or another separate locking device.

The handles feature a tough anodised matt black finish for a long lasting effect and can be ordered as part number GRP3792 retailing at £163.20 (inc VAT) per pair.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com