Month: September 2018

Webcon is pleased to announce that the genuine Weber 40IDA3C and 46IDA3C carburettors for the classic Porsche 911 will soon be produced once again and will be available from Webcon.

The carburettors are being produced from 100% new tooling created from the original Italian Weber factory drawings. Although the product is as original the manufacturing now uses the latest technologies to ensure that the very finest quality is maintained for every component.

The carburettors are expected to be available from October 2018. Watch the Webcon website for a release announcement.

Retail prices:
40IDA3C 3130000100 £1295 plus vat
40IDA3C1 3130000200 £1295 plus vat

46IDA3C 3136000100 £1395 plus vat
46IDA3C1 3136000200 £1395 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon knows more about carburettors than most, so when it starts stocking a book about carburettors you know the book must be good.

The Haynes Manual on Carburettors is billed by Haynes as “Complete coverage for your Carburettor”. It’s certainly the definitive DIY manual on automotive carburettors.

It covers the theory of carburettors, specifications, fault diagnosis, repairs and service adjustments on the following carburettors:,
* Ford Motorcraft 1V and Variable Venturi (VV)
• Pierburg 1B1, 1B3, 2B5, 2B6, 2B7, 2BE, 2E2 and 2E3
• Pierburg (Solex) PDSI and PIC-7
• Solex BIS, EEIT, PBISA, SEIA, Z1, Z10 and Z11
• Weber DARA, DFT, DFTH, DFTM, DGAV, DIR, DMTE, DMTL, DRT, DRTC, IBSH, ICEV, ICH, ICT, TL, TLA, TLDE, TLDR, TLDM, TLF, TLM and TLP
There are four hundred pages of information in total with colour photographs, step-by-step procedures and easy to follow exploded diagrams to the customary Haynes standards.

Price: £22.99 with zero rate VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Performance enthusiasts world-wide know that they can trust the Wilwood name to get their high performance vehicle to stop on a penny and now MX-5 owners can get purpose-made Wilwood kits from Moss Europe. These kits have everything you’ll need to improve your MX-5’s braking efficiency: huge 4 piston front calipers feature a tough protective black powder coating and there is a choice of vented or cross-drilled/slotted discs. These kits come complete with: pads, alloy bells, mounting brackets and bolts and fixings – in fact everything you need to bolt on some serious stopping power in your own garage! There are no modifications required to your MX-5. It even works with the OEM master cylinder. Naturally, full fitting instructions are included.

Features:
• Kit specifically designed to fit Mk1-2.5 (1989-2005) MX-5’s, with or without ABS
• Billet 4-piston Dynalite calipers. Corrosion resistant stainless steel pistons for low heat transfer
• Huge 11″ discs that increase brake leverage by 10%
• Discs cast from iron with vanes for heat management, low rotating mass and unsprung weight
• Slotted/cross-drilled disc option offers further weight loss and improved heat dissipation
• E-Coating prevents corrosion and looks cool too!
• Wilwood’s BP-10 pad material delivers quieter and significantly improved stopping power with
low dust emissions
Order as part number: 906-160 and request ‘Vented’ (at £690.00) or ‘Drilled/Slotted’ (at £840.00).
Please note: Whilst the kit is designed to fit behind most 15″ wheels we still recommend that wheel clearances are checked prior to fitting. Wilwood big brakes will not fit wheels smaller than 15″ diameter.

Moss also offer a Wilwood Stainless Steel Braided Hose kit to partner these brake kits. The braiding protects the hoses and prevents internal expansion which leads to a ‘spongy’ feeling brake pedal. Order as part number 906-170 at £69.00.

For more information visit:
For more details contact Moss Europe Ltd, on +44 (0) 20 8867 2000
or visit their website: www.moss-europe.co.uk

A sudden loss of oil pressure can destroy an engine in seconds. The standard 7lb oil pressure switch fitted to classic Minis often gives the warning too late to save the engine.

Mini Spares new uprated 20lb oil pressure switch activates the warning light when the oil pressure drops to 20lbs giving the driver precious extra seconds to shut down the engine.

The Mini Spares uprated 20lb oil pressure switch can be ordered as part number HPS1.

At just £22.28 inc VAT it’s a small price to pay to protect your engine.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Eco-friendly cars don’t have to be boring! M-Style is pleased to announce the release of the first grille upgrade in its Project i3 Range – a Paintable Gloss Black Grille Surround for the BMW i3.

Replacing the factory chrome detailing with black gives the car a more distinctive, ‘performance tuned’ look and the outer surround is also an ideal base for painting in the colour of your choice.

Prices
Gloss black or body colour surrounds £195.00 inc VAT
Gloss black or body colour surrounds + fitting £215.00 inc VAT

For further details visit the M-Style website: www.mstyle.co.uk
e-mail: info@mstyle.co.uk or call 0208 5989115

The Porsche 911 is probably one of the longest running nameplates of any car, and over the years the 911 has gone through many developments and improvements.

One improvement that GAZ can offer older 911s is adjustable coilover suspension to lower the centre of gravity and adjust the bump/rebound of the damping.

The kit includes adjustable coilovers on which the ride height can be adjusted through 60mm. The height adjusters have a coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

Damping rates are variable by means of an adjuster knob on the damper bodies. The GAZ Gold range is designed primarily for out-and-out racing so each comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under harsh racing and trackday conditions. Springs can be supplied to the customer’s specifications according to the vehicle’s intended use.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ Gold coilover kit for the Porsche 911 can be ordered as part number GGA045 at £1000 plus VAT. (Front donor struts are required).

For further details visit the GAZ website: www.gazshocks.com

Although the MGC received a special torsion bar suspension when the original MGB design was altered to receive the BMC ‘C Series’ six cylinder engine the MGC was never a great handler. In an effort to improve matters many were converted to tubular dampers and GAZ can offer an upgrade for those cars with a conversion kit.

GAZ dampers improve performance by adding adjustability for damper bump/rebound to suit the conditions and driving style. Adjustment is by means of an easily accessible knob on the side of the dampers.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.

GAZ dampers feature a zinc plated body for longevity and a plastic cover to protect the body from mud, stones and dirt.

All units are individually tested before leaving the factory and are covered by a two year warranty

GAZ dampers for the MGC can be ordered as part numbers GT6-2224 front and GT6-2222 rear. They retail at £57.78 each plus VAT. NB: GAZ dampers can only be fitted to MGC cars that have the tubular dampers conversion kit.

Note: Prince Charles took delivery of an MGC GT (SGY 766F) in 1967, which he passed down to Prince William 30 years later. Let’s hope he reads this!

For further details visit the GAZ website: www.gazshocks.com

The Mercedes 190E has now achieved ‘classic’ status and despite being designed in the late Seventies/early Eighties is still a comfortable long distance cruising car. However, for ‘spirited’ driving there is room for improvement in the suspension department as noted by Mercedes themselves when they added adjustable rear suspension to the 16 valve Evolution version of the 190.

Fitting GAZ dampers to the rear of the 190E will provide adjustability for damper bump/rebound to suit the conditions and driving style. Adjustment is by means of an easily accessible knob on the side of the dampers.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.

GAZ dampers feature a zinc plated body for longevity and a plastic cover to protect the body from mud, stones and dirt.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ rear dampers for the Mercedes 190E can be ordered as part number GT7-4944 and retail at £64.10 each plus VAT.

GAZ can also offer front and rear dampers for the Mercedes 190SL also at £68.04 each.

For further details visit the GAZ website: www.gazshocks.com

Just when you thought there couldn’t possibly be any more new products for the classic Mini, GAZ has come up with an all-aluminium bodied, fully adjustable, lightweight damper for the classic Mini, especially for use on lowered cars.

Fitting GAZ dampers to a classic car enables the bump/rebound rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing, which is where this lightweight damper will probably see most use..

GAZ dampers feature a zinc plated body for longevity and a plastic cover to protect the body from mud, stones and dirt.

All units are individually tested before leaving the factory and are covered by a two year warranty for road use.

GAZ Alloy Dampers for the classic Mini can be ordered as part numbers
GG2023 (front) and GG2024 (rear) at £64.29 each plus VAT.

GAZ can produce custom made dampers for many other classics by working from either the original specifications or the original dampers. Price is dependent on application.

For further details visit the GAZ website: www.gazshocks.com

Audiʼs 2.7 litre engine can achieve big time performance gains with Fidanzaʼs lightweight aluminium flywheel

Fidanza, Americaʼs leading performance flywheel specialists, have a direct replacement lightweight aluminium flywheel to improve the performance of the 2.7 litre ʻ00-ʼ02 Audi S4, the ʻ01-ʼ05 Allroad and the ʻ00 – ʻ04 Audi A6.

The Fidanza aluminium flywheel replaces the heavy dual mass standard flywheel and improves the power-to-weight ratio making the engine more responsive and improving performance.

The Fidanza aluminium flywheel is made from high-quality machined 6061 T6 aluminium with a 1050 steel friction surface, CNC machined fastener holes and chamfers. The friction surface of the flywheel is a replaceable steel plate, so when eventually the surface becomes worn it can be replaced without requiring a new flywheel. All Fidanza flywheels now come with a distinctive green protective coating on the friction surface.

Fidanza flywheels are suitable for use with just about any clutch disc material available – from organic to Kevlar and even sintered iron. The flywheels are incredibly durable and come with a heat-treated ring gear and military grade fasteners. Fidanza flywheels are equally suited for fast road, trackday and pure competition use.

Flywheel for Audi 2.7 engine ʻ00-ʼ05 – order as part number 112621.

For more information on Fidanza’s premium aluminium flywheels or to find your nearest dealer call 001 440 259 5656 or visit www.fidanza.com