Webcon is delighted to announce the introduction of a range of anodised aluminium finish EFi regulators to complement the blue and red versions already available.
The regulators are technically the same as the existing versions but are visually more appropriate for a ‘business like’ natural-metal engine-bay theme.
They are supplied complete with a mounting bracket and 8mm push-on unions.
Prices as follows:
Pressure Part number Price 2.5 bar WFR225 £83.51 + VAT 3.0 bar WFR230 £83.51 + VAT 3.5 bar WFR235 £83.51 + VAT 4.0 bar WFR240 £115.95 + VAT 4.3 bar WFR243 £88.51 + VAT 4.5 bar WFR245 £86.04 + VAT 0-5 bar adjustable WFR205 £86.04 + VAT
Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
M-Style now has a complete M2 Competition Look Kit for F22 F23 BMW 2 Series.
The kit includes: front bumper, rear bumper, side skirts and all grilles and trim as pictured.
Parking Distance Control (PDC) is available, but needs to be specified at the time of ordering.
Complete kit price inc. VAT: £994.99
Painting and fitting services are available at M-Style’s BMW specialist workshop. Painting and fitting: add £650.00 inc. VAT Painting of kit: add £450.00 inc. VAT
The kit is suitable for both the LCI and Pre-LCI models.
For further details e-mail info@mstyle.co.uk or call 0208 598 9115
Mini Spares is pleased to announce it now has shift engagement dog gear kits to supplement its straight and helical cut gear sets.
The kits are available for rod and remote changes with the following ratios: 2.143,1.486,1.195, 1.1 ratios – C-STN40 rod change and C-STN43 remote change. 2.362,1.564,1.195, 1.1 ratios – C-STN40A rod change and C-STN43A remote change.
The kits retail at £2,157.60 each inc VAT.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Porsche 944/968 Gaz now offers a sophisticated double adjustable, remote canister, gas race suspension kit for the Porsche 944 and 968. The coilover dampers are both height and damper rate adjustable. Ride height is altered by means of adjustable spring seats. The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are black zinc plated to ensure that they remain in good order even after considerable service.
The front struts also have elongated holes to allow camber adjustment.
Damper bounce and rebound rates are independently controlled. The bump setting is adjusted on the remote canister and the rebound setting is adjusted on the strut body. The GAZ coilovers come with gas cells in the remote reservoirs filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions.
All the units are individually tested before leaving the factory.
The GAZ double adjustable gas kit for Porsche 944 and 968 can be ordered as part number GGA038DA at £1963.34 + carriage & VAT For further details visit the GAZ website: www.gazshocks.com
Leading suspension specialist GAZ has GAZ Gold coilover suspension kits for the Vauxhall Corsa ‘B’ with the added benefit of adjustable camber settings. The front camber angle can be adjusted by means of an offset bolt.
The coilovers are produced with a gas cell in the outer reservoir which helps prevent cavitation. The units are then filled with a multi grade high viscosity index fluid to help resist fade under extreme conditions.
GAZ Gold units are bump and rebound adjustable while on the vehicle by means of an easily accessible adjuster knob on the side of the damper body.
Ride height is adjustable through 60mm of adjustment all round. All units are individually tested before leaving the factory and are covered by a two year manufacturer’s warranty.
GAZ ‘Gold’ Coilover Kit for 1993 on Vauxhall/Opel Corsa ‘B’ £1,064.26 plus VAT. Part: GGA410.
Also available: • Roller bearing mounts for these units are an optional extra. • Vauxhall Corsa – Eccentric Top Mounts.,Pair £138.92 plus VAT.
If ever there was a company that knows a thing or two about tuning BMW suspension then top of the list would be GAZ. It has been supplying, sponsoring and winning BMW race series for many years now.
GAZ has just re-released its popular GAZ Gold suspension kit for the BMW E30, but now the dampers and struts are coated in the company’s latest super-tough Black Zinc finish. The new protective finish will ensure that the dampers will remain in good order for many years despite whatever the track and road can throw at them.
Ride height is altered by means of adjustable spring seats and, in keeping with the theme of durability, the height adjusters have a coarse acme form thread for ease of adjustment even when caked in dry mud.
Damper bounce and rebound rates are adjusted by means of easily accessible adjuster knobs on the damper body. The GAZ coilovers come with integral gas cells filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions and, for extra peace of mind, all the units are individually tested and certified before leaving the factory.
The GAZ GOLD kit for BMW E30 1982-91 (incl. M3 model) can be ordered as part number GGA300 at £1,064.26 + VAT. Also shown, solid race top mounts at £127.34 per pair + VAT. (Adjustable version also available)
For further details visit the GAZ website: www.gazshocks.com
Leading suspension specialist GAZ offers GAZ Gold coilover suspension kits for both the 2WD and 4WD versions of the early Audi TT. The kits are suitable for street, track day and even outright competition vehicles (especially those that have been subject to extensive power upgrades).
The kit consists of a pair of GAZ Gold coilovers for the front and a pair of GAZ adjustable dampers, lowered springs and height adjustable spring seats for the rear.
GAZ Gold coilovers are produced with a gas cell in the outer reservoir which helps prevent cavitation. The units are then filled with a multi grade high viscosity index fluid to help resist fade under extreme conditions.
GAZ Gold units are bump and rebound adjustable whilst on the vehicle by means of an easily accessible adjuster knob.
Ride height is adjustable through 60mm of adjustment and all units are individually tested before leaving the factory and are covered by a two year warranty.
Part: GGA436 GAZ Gold Coilover Kit – 1998-2001 Audi TT 4wd RRP £1,064.26 plus. VAT. Part: GGA437 GAZ Gold Coilover Kit – 1998-2001 Audi TT 2wd RRP £1,064.26 plus. VAT.
Summer’s finally here and we’d all like to have a Jaguar E-Type to go cruising through winding country lanes. For those lucky enough to already be in the position to do just that, the experience can be further enhanced with a Fidanza lightweight flywheel.
A Fidanza lightweight flywheel will deliver the following benefits:
• Faster throttle response and quicker acceleration • Additional horsepower to the wheels (reduced parasitic losses) • Smoother, faster shifting • Easier braking, better slowing (due to reduced rotational mass) • Reduced clutch wear and improved efficiency (from better heat dissipation) • Cost savings and longevity (thanks to Fidanza’s replaceable green friction plate – no need to replace entire flywheel when worn) • Potential for increased fuel economy (if you can keep your foot off the gas!) • Quality and reliability (made in the USA from top grade materials)
Fidanza flywheels are available for: 1961-64 3.8 litre models – Fidanza part number 119381 1965-71 4.2 litre models – Fidanza part number 119421 1971-74 5.3 litre models – Fidanza part number 119531
Fidanza flywheels are available in Europe through Limora in Germany, France, Poland, Spain and Italy. Prices from the Fidanza.com website start at $408.51 but will be subject to import tax, handling and shipping. Contact Limora for local prices.
For more information on Fidanza’s aluminium flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com
Tired of excessive heat when running your Pioneer 700 or 700-4?
DEI Powersports now offers a heat shield kit that reduces the seat temperatures as well as blocking the heat radiating up through the seat belt holes.
Installation is straight forward with CNC precision cut pieces of DEI Extreme Heat Barrier material.
DEI Extreme Heat Barrier material is composed of a 10mm aluminium layer bonded to a finely woven layer of high temperature resistant glass fibre and an aggressive self adhesive backing.
• Reduces noise, vibration, and heat • Only 3/16” (0.47625cm) thick • Withstands radiant temperatures up to 1750°F (approx. 955°C) • No modifications needed to install
Order DEI Powersports Heat Shield Kit for 2014-2020 Honda Pioneer 700 & 700-4 as part no. 902110
DEI Powersports are distributed in the UK and Europe by Parts Europe. Visit partseurope.eu for Trade Enquiries or to find a dealer in your area.
For more information on DEI’s Heat & Sound Control Products visit: deipowersports.com
To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.
Wouldn’t it be great if you could get a headlining material that not only looked good but also insulated your vehicle’s interior from exterior heat and noise?
Well, now you can because DEI has released its new Universal Upholstery Material that combines a leather-look perforated vinyl with a sound-insulating foam backing and DEI’s decades of heat insulation know-how.
DEI’s Universal Upholstery Material is the ideal solution for any custom interior project including: kit car interiors, classic restorations, roadster hardtops, camper van interiors and van linings; in fact if it has a roof it can benefit from DEI’s Universal Upholstery Material. (It is also suitable for door panels and package trays).
DEI’s Universal Upholstery Material is simple to install using DEI Hi-Temp Spray Adhesive which, unlike general carpet spray adhesive, won’t let go when the sun shines on your vehicle’s roof.
DEI’s Universal Upholstery Material is available in 54” x 79” sheets enabling most project to be completed without joins or seams. A sheet of DEI’s Universal Upholstery Material can be ordered as part number 50028 at £140.37 (which is considerably cheaper than having to buy heat shielding foil, sound proofing felt and a quality headlining material). DEI Hi-Temp Spray Adhesive is available as part number 010490 at £13.37.
Prices shown are for supply direct from DEI in America and will be subject to import tax, shipping costs and handling fees. UK and European customers are recommended to check local DEI official dealers for prices.
To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.
