Month: June 2023

Gaz now offers a performance suspension kit for the classic Ferrari 308. The kit provides coilover struts that are both height and damper rate adjustable. Ride height is adjustable through 80mm of adjustment.

The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are black zinc plated to ensure that they remain in good order even after considerable service.

Damper rates are variable by means of an adjuster knob on the damper body. The dampers come with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade should you wish to test your investment to the limit under racing or trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ Coilovers for Ferrari 308 can be ordered as GP8-5013 front and GP8-5014 rear. They retail at £175.04 each + VAT.

GAZ can produce this kit with ‘road use’ or ‘full race’ valving as required.

For further details visit the GAZ website: www.gazshocks.com

Gaz now offers a top adjustable strut insert that fits the front struts of numerous British classic Fords including the Escort Mk2 RS Mexico.

Rebound adjustment is provided at the twist of the top adjuster.

Bump rates can be specified for ‘road use’ or for ‘competition and dedicated track use’ when ordering.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GAI strut insert for the above cars comes with a billet alloy adjuster key and can be ordered as part number GAI 4103 at £104.56 each plus VAT.

For further details visit the GAZ website: www.gazshocks.com

Fidanza is best known for its lightweight aluminum flywheels, but the company now also offers a performance shifter for the popular 2002-2004 Mini Cooper and Mini Cooper S.

Fidanza Short Throw Shifters are designed as a direct, bolt in, factory replacement and reduce throw by up to 40% for faster shifts.

Fidanza short shift kits are precisely made with 6061 aluminum and hardened steel and manufactured with the same precision and to the same quality as Fidanza Flywheels.

The Fidanza Short Throw Shifter for 2002-2004 Mini Cooper and Mini Cooper S is suitable for both five and six speed gearboxes and can be ordered as part number – 891851 at $99.99 plus shipping and import tax.

For more information on Fidanza’s short throw shifters, aluminum flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com

For further details contact sales@fidanza.com

Many stainless steel braided hoses come in AN (Army & Navy) sizes so heat protection specialist DEI is now producing its popular Heat Shroud™ Kits in AN sizes.

Unwanted heat from engines, turbos and exhausts can damage fuel lines, hoses and wires. DEI Heat Shroud protects them without the need to disconnect the parts to wrap them. DEI Heat Shroud reflects 90% of radiant heat and will resist temperatures of up to 260°C (500°F).

DEI Heat Shroud is made from a high temperature-rated glass-fibre fabric with an aluminised outer layer. (It is the same as DEI Heat Sheath but with the added convenience of a ‘Velcro’-type fastening along the open edges). DEI Heat Shroud can be easily trimmed to length with a knife or scissors.

DEI Heat Shroud protects against oil, dirt and road grime and can be shaped to fit the tightest bends.

DEI Heat Shroud is now available in the following AN sizes:
Part No. AN Size Length Price (May alter with currency fluctuations)
10673 12AN 3ft (91.44cm) £37.36
10674 12AN 10ft (3.048m) £109.50
10675 16AN 10ft (3.048m) £112.72
10676 16AN 3ft (91.44cm) £38.42
10677 20AN 3ft (91.44cm) £39.50
10678 20AN 10ft (3.048m) £115.96
Prices are subject to shipping and import tax.

DEI Products are available from Nimbus Motorsport, https://nimbusmotorsport.com

Over the years it has become apparent that the fitment of 45DCOE carburettors to certain newer types of engine (such as Ford Zetec and Duratec) will result in a flat spot just off idle that no amount of calibration will eradicate.

Webcon have studied this characteristic in detail and have developed a very specific procedure to modify 3 or 4 progression hole models to 5 progression holes. This delivers the precise extra amount of mixture in the progression phase to overcome this flat spot resulting in a smoother more progressive transition from idle to main.

Burton Power is pleased to announce it now has stocks of these modified carburettors.
Order a complete kit as part number WEB17900.258 at £1,165.00 inc. VAT.

The kit includes two carburettors jetted for a standard 2.0 litre Zetec E/Duratec HE I4.
Includes balance linkage and a banjo T.
calibrated as follows:

• Venturi 36mm
• Aux Venturi 4.5
• Main Jet 145
• Air Corrector 155
• Emulsion Tube F16
• Idle Jet 55F8
• Needle Valve 200
• Pump Jet 45
• Pump Spill 40

For further details contact Burton Power on 0208 554 2281 or visit www.burtonpower.com

Thanks to a discovery of ‘new, old stock’ Burton Power is pleased to announce that it can now offer genuine Ford head gaskets for the Ford Essex V4 engine (Ford part: 692F 6051 AA).
The gaskets are sold individually, so customers will need to purchase two for an engine set.

Ford Essex V4 gasket- order as part number FV776 at £18.00 each inc. VAT

Applications:
Ford Capri Mk1 2.0 V4 1969-1974
Ford Corsair 1.7/2.0 V4 1965-1970
Ford Consul/Granada Mk1 2.0 V4 1972-1975
Ford Transit Mk1 1.7/2.0 V4 1965-1978
Ford Zephyr Mk4 2.0 V4 1966-1972

N.B. These gaskets are only available while stocks last, so customers are advised to buy now whilst they are available. When they are gone, they’re gone!

For further details contact Burton Power on 0208 554 2281 or visit www.burtonpower.com