Burton is pleased to announce that it can once again offer ABS sensors for Sierra & Escort Cosworth.
Burton’s ABS Sensors for Sierra & Escort Cosworth
The sensors are faithful reproductions of the original Ford items which are now obsolete.
The sensors can be ordered as follows:
SC910 – front sensor – Sierra Cosworth 2wd
SC911 – front sensor – Sierra Cosworth 4wd
SC912 – front sensor – Escort Cosworth
SC915 – rear sensor – Sierra Cosworth 2wd & 4wd
SC916 – rear sensor – Escort Cosworth
The sensors come complete with integral wiring as shown and are complete with moulded rubber protective boots and grommets.
Retail price £97.50 each + VAT
for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
EXO Sleeve – Wiring, Line & Hose 3 in 1 Protection
EXO Sleeve – Wiring, Line & Hose 3 in 1 Protection
New EXO Sleeve from DEI offers your wiring, hoses and oil, brake and transmission lines not one, but three, levels of protection.
At the centre, sitting next to the loom, line or hose to be protected, is a layer of high temperature resistant braided glass material woven into a sleeve. This protects from continuous, direct heat up to 500°F and up to 2000°F intermittent heat. It also provides a soft cushion that protects the line from impact, abrasion and shrap objects.
The inner braided glass core is surrounded by a 100% silicone rubber coating that protects against water and damage from other fluids as well as providing electrical insulation and further protection against heat.
Finally, on the outside there is a T304 stainless steel mesh covering that provides tough protection against impact and abrasion in addition to air flow around sleeve.
As well as protecting the line within, EXO Sleeve also protects the mechanic from burns during repairs and maintenance.
Each pack includes a 16″ length of DEI Fire Tape to finish the cut ends.
EXO Sleeve is made in the USA and is available as:
Part #010872 3/8″ ID x 3′ – Black $30.36 + shipping and tax
Part #010873 1″ ID x 3′ – Black $42.17 + shipping and tax
Order direct from DEI in America or search on-line for a dealer in your area at………
Cobra Sport’s CAT-back performance exhaust for the Fiesta 1.0 Eco Boost Zetec-S has been designed to allow for faster gas flows, opening up the opportunities for engine tuning. To fulfill that opportunity Cobra Sport’s race partner, AmD Tuning, has developed a remap that has been specially written to work hand-in-hand with the new exhaust system.
AmD Tuning Package for Ford Fiesta 1.0 EcoBoost Zetec-S Software remap and performance exhaust
The AmD software remap works with the new-found increased efficiency of the exhaust and develops upon it. The combination creates more power than just the sum of the gains that would be achieved by the exhaust and software added together.
Because the AmD remap has been designed specifically to work with the Cobra Sport exhaust you can be sure that everything will work with maximum efficiency and without any fault codes being triggered in error.
AmD Tuning also offer FREE FITTING on all Cobra Sport Exhausts – or, if you prefer to buy by mail order and fit it yourself, AmD will offer 10% off and FREE DELIVERY – which can represent a significant saving on a full system. Furthermore, if you buy an AmD Tuning performance remap at the same time as a Cobra Sport Exhaust you can have the remap at HALF the usual retail price!
Contact AmD Tuning for further details on 01708 861827 or visit www.amdtuning.com
