Month: February 2022

The Escort MkII estates and vans were a bit of an oddball creation with the Escort MkI body and an Escort MkII front end.

However, this doesn’t stop GAZ Suspension from offering GT shock absorbers for these models.

GAZ GT Dampers will provide variable bump and rebound rates which can be adjusted to suit the conditions and driving style. The damping rates can be altered by means of an easily accessible knob on the side of the units.

GAZ can set the dampers up for general road use and they will also be suitable for occasional track slalom and sprint use, or alternatively they can even be set up for serious racing use if you desired. It should go without saying that the rate can also be wound up to carry a heavy load in the back!

GAZ dampers feature a zinc plated body and protective plastic sleeve to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GT dampers for Ford Escort MkII estate/van can be ordered as GAI2103 for the front and GT5-2061 for the rear. Front dampers retail at £96.80 each and rears sell for £63.70 each. Prices are plus VAT and the dampers are suitable for all estate and van models from 1975 to 1980.

For further details visit the GAZ website:
www.gazshocks.com

Following a recent order for a one-off set, leading suspension specialists GAZ has now added the
neo-classic Vauxhall Opel Calibra to its monotube suspension application list.

GAZ gas-charged monotube coilovers are far lighter than other types of coilover damper and also make use of lightweight billet aluminium parts; thus unsprung weight is reduced, making them ideal for serious trackday or competition use. They also react quicker and can be used in an inverted position.

GAZ monotube coilover kits come with silicone chrome springs and the required mounting hardwear. The spring platforms are adjustable to allow the ride height to be altered as required and the bump and rebound settings can be adjusted by means of a knurled collar at the top (or bottom if used inverted).

Like all GAZ coilovers the monotubes carry a two year warranty for non-race use.

Bespoke valving and the customer’s preferred spring rates are available.

GAZ Monotube Coilover Suspension Kits for the Vauxhall/Opel Calibra retail at £1495.00 + VAT.

For further details visit the GAZ website:
www.gazshocks.com

There must be quite a few Austin Healey Sprite owners who are preparing their cars for the first outing of the year. So it’s just the right time to consider installing a Fidanza lightweight flywheel.

A Fidanza lightweight aluminum flywheel will improve performance and acceleration because replacing the heavy standard flywheel dramatically improves the power-to-weight ratio.

The Fidanza aluminium flywheel is made from high-quality machined 6061 T6 aluminium with a 1050 steel friction surface. Fastener holes and chamfers have been CNC machined for accuracy and military grade fasteners are included.

The steel friction surface of the flywheel (shown in the image with its green protective coating) is heat treated for optimum grip and a long service life. It is also replaceable; when the surface eventually becomes worn it can be changed without having to replace the whole flywheel.

Every Fidanza flywheel application is a unique design. Each design takes into account: overall balance, critical clearances, tensile strength, heat dissipation and optimum weight saving. Thereby a careful balance is struck between reducing the original weight and maintaining a smooth idle for day-to-day street driving.

The Fidanza lightweight aluminum flywheel for 1961-1963 Austin Healey 948cc Sprite can be ordered directly from Fidanza.com as part number 126481 at $415.73 plus shipping and import tax.

Fidanza can also supply a similar flywheel for 1966-1974 MG Midget/Sprite -1275cc.
Order as part number 126751 – $403.47 plus shipping and import tax.

For more information on Fidanza’s great products visit www.fidanza.com or contact sales@fidanza.com

One of the bugbears of modern motoring is having the ‘Check Engine’ light come on, paying for a garage to check it out and finding that it’s not an engine fault, but the sensor ‘playing up’. There are many reasons for a sensor giving a false warning or actually fail. Some can be prevented by fitting DEI’s new Thermal Sensor Covers.

DEI Thermal Sensor Covers will protect delicate sensors, plugs and wire connectors from heat, moisture and dirt. They are made from an aluminised insulation material that acts as a thermal barrier for sensitive wire connections and the sensors themselves.

DEI Thermal Sensor Covers are simple to install thanks to a split top. There is no need to disconnect the wiring loom to install them.

DEI Thermal Sensor Covers are sold in pairs and are available with 25mm and 32mm diameters. They can be nested together to fully cover connectors and are particularly effective near exhaust manifolds, turbos and other heat sources.

Prices start at £16.18 per pair plus import tax and delivery.
• 10753 – 25mm diameter 2 pack
• 10754 – 32mm diam. diameter 2 pack
• 10759 – 25mm+32mm diameter pack of one each

For more information about DEI’s Innovative Heat & Sound Control Solutions, call +1-800-264-9472, or email Sales@DesignEngineering.com.

To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.

The Cosworth YB Engine has two thermostat/water housings that are comprised of an unusually complex rear section to house the thermostat and a front section that connects to the radiator bottom hose.

These castings can corrode and degrade over time, especially if the coolant has been neglected. Fortunately Burton Power can supply replacements for both sections to bring the system back to prime condition.

The Front Section Connector (with plug) can be ordered as part number SC1074 at £38.50 inc. VAT and the Rear Section Thermostat/Water Housing can be ordered as part number SC1073 at £60.00 inc. VAT.

These housings are suitable for:
• Ford Sierra Sapphire RS Cosworth 4wd 1990-1992
• Ford Escort RS Cosworth 4wd T34 1992-06/1994
• Ford Escort RS Cosworth 4wd T25 06/1994-1996

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Conventional rocker arms tend to produce sideways movement in the valve stems which causes high levels of friction and subsequent wear to both stems and valve guides. Replacing the standard rockers with roller-rockers virtually eliminates this wear thanks to the strong arm construction of the rockers and the presence of large, low friction needle roller bearings.

The standard lift Burton Roller Rocker Assembly for the Ford Kent engine can be ordered as part number FP229K at £500.00 inc. VAT.

The roller rocker assembly is suitable for all Ford Kent engines, but an alloy rocker cover will be required for clearance. The Burton FP227 or FP227P RED Alloy Rocker Covers would be ideal.

The roller rocker assembly is also suitable for Kent engines used in:
• Caterham 7
• Morgan 4/4 1600 1.6 1968-
• TVR 1600M 1.6 1972-1977

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com