Eurotuningnews.com

Webcon is able to supply a huge range of genuine Weber spare parts for the 40 and 46IDA3C range of carburettors for Porsche 6 cylinder engines and is pleased to announce the addition of top cover assemblies to that range.

The top covers come complete with inlet unions, needle valves and studs. The new assemblies are suitable for original Italian, as well as modern Spanish IDA3C production and are available as follows:

Application Ref Price
40IDA3C 3172600200 £363.50 plus VAT
46IDA3C 3172600100 £389.25 plus VAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

With the ever increasing ethanol content in modern fuels, which causes higher engine bay temperatures, heat soak is becoming more of an issue, especially for down draft carburettors such as the Weber IDA and IDF.

Traditionally, the use of 5mm insulators has been enough to prevent significant heat transfer. However, in a number of installations this is no longer sufficient and so Webcon has now developed a range of 10mm insulators to suit these models of carburettor.

These new insulators are available in 40, 44 and 48mm and are made to the very highest quality in the UK. They are supplied complete with gaskets bonded top and bottom and are available as follows:

Suits Reference Price each (2 needed per carburettor)
40IDF 9900504000 £15.99 plus VAT
44IDF 9900504500 £15.99 plus VAT
48IDF/48IDA 9900504800 £15.99 plus VAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Some early Minis have ‘Hydrolastic’ or ‘wet’ suspensions. This means that they ride on four bags filled with pressurised fluid akin to antifreeze. As the systems age they are prone to lose pressure and so require pumping up. Nowadays your neighbourhood garage might no longer be equipped to do this! Thus, you, your mechanic, or your club may want to invest in this unique Hydrolastic Suspension Pump to keep the ‘wet’ cars on the road.

This Mini Spares pump will also pump up Metro hydrogas units as well as any car fitted with hydrolastic units.

Order as TOOL01 at £180.00 inc. VAT complete with pressure guage.
Fluid is available as MORRIS05

Turning to the car itself, new hydrolastic units have been unavailable for years. Thankfully, Mini Spares now offers reconditioned units that have been taken back to bare metal, etch primed/painted and had new hoses fitted then rig tested.
Order as 21A2008 at £216.00 inc. VAT
Sold on an exchange basis (£150+vat surcharge).

(Please note these are non S units however, S units can also be reconditioned if necessary).

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

If you’re taking a classic Mini on a road trip you’ll likely find that the boot space isn’t sufficient for all your luggage.

The Mini Spares Monte Carlo style roof rack will be a useful addition for all the baggage that won’t fit in the boot.

The Mini Spares Monte Carlo style roof rack is made from high quality materials to the standard you would expect from Mini Spares. It has been hand made in the UK to Mini Spares’ own exacting specifications, which results in it being much stronger and more durable than the cheaper imported options currently on the market.

Order as ROOFRACK at £396.00 inc VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Now Burton has made it easier than ever to fit front vented discs to a Ford Capri, Cortina or M1/2 Escort.
(The conversion will also fit the German Ford Taunus TC Mk 1, 2 & 3.)

The kit provides spacers to convert a standard M16 brake caliper to fit the wider OE Ford vented brake discs that were used on Capri 2.8i/Group 1 Escort RS models.

This Burton kit is a high quality, accurate copy of the original Ford parts and includes the correct longer pad retaining pins rather than cheaper split pins.

One kit will space two brake calipers.

Order as part number BRK008 at £33.00 inc. VAT

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

For Capri Mk3, Granada Mk2, Mk3 & Scorpio, Sierra, Transit Mk3
and as a 5 Speed Conversion for MG, Triumph and Kit Cars

Burton Power now offers a complete Type 9 five speed gearbox which has a GBT9200 long first gear conversion. The ratio of first gear has been lowered from a short 3.65:1 to a much more useable 2.98:1.

These gearboxes have been reconditioned, but to Ford’s exacting O.E. Standards. This includes a brand new mainshaft first gear and a layshaft cluster that has been modified and fitted with a new first gear. The remaining gears are as original.

The Type 9 gearbox (also referred to as a ‘Type N’ gearbox in some workshop manuals) was the original fitment on Ford Capri Mk3, Granada Mk2, Granada/Scorpio Mk3, Sierra 1.6 / 1.8 / 2.0 and Transit Mk3.In addition it can also be used on older Fords to convert them from four to five speed as well as other classic makes such as MG and Triumph and kit cars.

Order as part number GBT9160 at ££2,400.00 inc. VAT (Outright sale. No exchange required)

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Webcon is pleased to announce the re-introduction of the inlet manifold to allow the fitment of a pair of Weber DCOE or Dellorto DHLA carburettors to the Triumph TR7.

Like all Webcon brand inlet manifolds, MW3248 is cast and machined entirely in the UK and is produced from top quality LM25 grade aluminium.

MW3248 is supplied with softmounts, studs and nuts and is priced at £373.75 plus VAT.

Alternatively, a complete kit with genuine Weber 45 carburettors and Webcon’s own UK manufactured rod linkage system is also available as part number PTR207 priced at £1,499 plus VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is delighted to announce the reintroduction of the 38DGAS upgrade kit for the
Ford 2.0 Pinto engine.

The synchronous 38 DGAS 3.0 V6 carburettor is a direct swap for the Pinto’s progressive Weber 32/36 DGAV and has been jetted especially for the 2.0 engine. It is a perfect complement for a ported head, fast road cam and performance exhaust system.

1893000100 features the special air bush modification required to suit the 2.0 Pinto and
is available in kit form as shown at £404.76 plus VAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon has just re-released a Group ‘A’ uprated BAE504F replacement ignition coil to suit the Ford Sierra Cosworth.

This genuine Webcon coil is a direct replacement for the standard coil and can be ordered as Webcon part number WIC044.

The coil is suitable for the Ford Sierra Cosworth 3 Door, 5 door, 4WD and RS500 models

Part number WIC044 is available at £65.23 plus VAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Mini Spares has joined forces with Wossner to produce a lightweight forged piston set for classic Minis and other A Series engines at a realistic price.

These standard compression height pistons feature an offset dished bowl and the set comes complete with standard size 18mm gudgeon pins, clips and a full set of piston rings.

Order as part number C-STN210-120 at just £499.20 inc VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com