Eurotuningnews.com

It can get pretty stormy in a Mercedes-AMG C 63 S Cabriolet: After all, the car uses an impressive 510 hp (375 kW) and 700 Nm to propel the driver and up to three passengers through the air – without ever losing its grip on the road. The German tuning company Sportservice Lorinser now adds a few wind force levels to that: For 2,499 euros plus installation, the discerning customers can expect 598 hp (440 kW) and 830 Nm. And for those who are not entirely comfortable at the upper end of the Beaufort scale, this and of course all the following extras are of course also available for the Coupé, Sedan or Wagon.

The “powerhouse” is based on the innovative Lorinser PowerModule, with which the tuner recently rang in a new era of power boosts. The benefits compared to the previous generation are already evident during installation, which only takes a short time in the workshop thanks to the plug-and-play concept: All connections are simply plugged in, so the entire process is nondestructive and can be reversed at any time. Getting more power under the hood has rarely been this quick. Convenient: Although the software for each PowerModule is meticulously adapted to the respective engine, the hardware can be transferred into another Mercedes if required. In this case, only a flat fee of 300 euros will be charged for complete reprogramming.

But who would want to part with a cabriolet that gives driver and passengers such an exciting driving experience? Those looking for a little change in appearance can invest in attractive side mirror covers (799 euros) made of matt real carbon from Sportservice Lorinser.

The 19 or 20 inch “turbine” wheels are another attractive highlight. The distinct RS8 alloy wheels are a true classic in the range of the Mercedes tuner and convey a highly dynamic feeling. They are available in an elegant silver color or in racy black for a price of 2,599 euros per set. The immense and aggressive RS9 with its five double-slotted spokes offers a 19 inch alternative for 2,949 euros per set. With so much fine tuning, the sky is practically the limit for the Mercedes-AMG C 63 S Cabriolet.

Webcon is delighted to advise that the superb MSX crossflow cylinder head for the MGB is once again in full production and is available from stock.

The MSX crossflow cylinder head is manufactured from lightweight aluminium which makes it approximately 50% lighter than the stock iron head. It is also easier to modify and has significantly better heat dissipation qualities.

The MSX crossflow cylinder head allows the fitment of a pair of Weber DCOE carburettors or DCOE-style throttle bodies using the appropriate intake manifold.

The Webcon MSX MGB cylinder head is available with or without valves and springs as follows:

Without Valves/Springs Part no. 9990261300 £1259.25 plus VAT
Fully assembled Part no. 9990261300AS £1436.35 plus VAT

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is delighted to announce the relaunch of the Weber Twin Choke Conversion Kit for the Ford CVH 1.6 engine.

This popular engine is used in many cars, including the Ford Fiesta XR2 and Escort XR3, Morgan 4/4 and numerous kit cars. With many of the original carburettors approaching the end of their useful life, a Weber 32/34 DMTL manual choke carburettor conversion will breath new life into these performance cars.

The Weber Twin Choke Conversion Kit can be ordered as part number PFO103 and includes a new Webcon manifold, a Weber 32/34 DMTL carburettor jetted for the 1.6 CVH engine, an air filter
and an OEM air box adaptor, as well as a new choke cable.

The kit is very competitively priced at just £572.55 plus VAT.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Mini Spares is now producing door frames with inner skins for classic Mini Mk3 models onwards.

The frames are supplied without outer skins giving the customer the option of fitting an original metal or a lightweight alloy outer skin for competition/racing use.

This also allows customers and restorers to apply a corrosion preservative covering before fitting the outer door skin.

Order right hand door frame/inner skin as part number MSP020 at £250.74 inc. VAT
Order left hand door frame/inner skin as part number MSP021 at £250.74 inc. VAT

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style is currently offering a ‘Stance’ Package for the BMW F40 M135i that will lower the ride height by 30mm and increase the track width for improved handling and a ‘performance’ appearance.

The springs come from the leading German manufacturers Eibach and the 12/15mm spacers are manufacturered by BIMECC.

The kit is available at just £400 inc. VAT but numbers are limited, so contact M-Style now to ensure you get yours.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

Leading suspension specialist, GAZ, can now offer a GAZ GHA kit to bring ride height and damper rate adjustability to the popular 2005-on Fiesta ST150.

GAZ damper units allow damping adjustment while on the vehicle by means of easily accessible adjuster knobs/top adjusters.

Shortened body and stroke lengths allow a -25 to -55mm ride height variation with a coarse acme form thread provided for easy adjustment.

Each unit is zinc plated to minimise corrosion and to ensure that the height adjusters will go on working for many years to come.

All units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ GHA Coilover Kit for the 2005 on Fiesta ST150 can be ordered as GHA368 and retails at £658.21 plus. VAT.

For further details visit the GAZ website: www.gazshocks.com

Gaz now offers fully adjustable GAZ Gold suspension kits for the Peugeot 307 and Citroen C4. The coilover struts are both height and damper rate adjustable. Ride height is altered by means of adjustable spring seats.

The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are black zinc plated to ensure that they remain in good order even after considerable service.

Damper rates are controlled by an adjuster knob on the damper body. The GAZ coilovers come with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ Gold Coilover Kit for the Peugeot 307 and Citroen C4 also includes adjjustable dampers, springs and adjustable ride height spring seats for the rear. The kit can be ordered as part number GGA498 at £1024.21+VAT.

GAZ can produce this kit with ‘road use’ or ‘full race’ valving as required and supply the appropriate springs for the intended purpose.

For further details visit the GAZ website: www.gazshocks.com

Gaz now offers fully adjustable GAZ  Gold suspension kits for the Vauxhall Astra Mk1, 2 & 3 and Opel Kadett and Astra B/C. The coilover front struts are both height and damper rate adjustable. Ride height is altered by means of adjustable spring seats.

The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are black zinc plated to ensure that they remain in good order even after considerable service.

Damper rates are controlled by an adjuster knob on the damper body. The GAZ coilovers come with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ Gold Coilover Kit for Vauxhall Astra Mk1/2/3 and Opel Kadett and Astra B/C also includes adjustable dampers, with fixed height springs for the rear. The kit can be ordered as part number GGA420 at £1064.26+VAT.

GAZ can produce this kit with ‘road use’ or ‘full race’ valving as required and supply the appropriate springs for the intended purpose. Donor standard strut units are required for this conversion.

For further details visit the GAZ website: www.gazshocks.com

Fidanza Performance shifters are designed as a ‘plug-‘n’-play’ direct factory replacement and reduce throw by up to 40% for faster shifts.

Fidanza short shift kits are precisely made with 6061 billet aluminium and a hardened steel lever shaft.

The Fidanza short throw shifter number 891102 is based on the OEM shifter design with a reduced angle in the shifter shaft. The result will change your driving experience by giving you a shorter throw and an even sportier shifter action. This conversion is also height adjustable allowing the driver to adjust the shifter height to suit their own preference.

The Fidanza Short Throw Shifter number 891102 is suitable for:
2003-2008 BMW Z4 Roadster & Coupe, Z4M Roadster and M Coupe 3.2

Fidanza Short Shifter 891102 is available from Fidanza.com at $236.08 plus import tax and shipping.

For more information on Fidanza’s great products visit www.fidanza.com or contact sales@fidanza.com

The qualities of DEI’s heat shield wrapping, rolls and tailor-made products are well known, but sometimes just a small area of heat protection is required; for instance, to protect other engine bay components from turbo heat or to prevent accidental burns from a hot exhaust.

DEI is now offering handy sized Universal Heat Shield Pads for instant heat protection precisely where it’s needed.

The pads are made from double sided high grade stainless steel with a high temperature insulation layer. The welded seams seal the insulation between the stainless steel outers making for a durable, long lasting shield. Grommet holes are provided at the corners for easy mounting.

DEI Universal Heat Shield Pads are capable of withstanding a direct heat of 2000°F. (Approx 1090°C).

The pads are extremely light weight; they block heat and protect components better than factory shields. They can be hand formed to fit bends and curves and are available in two sizes.
10257 Stainless Steel Heat Shield Pad – 4″ x 8″ (10.16cm x 20.32cm) £57.96 each
10258 Stainless Steel Heat Shield Pad – 12″ x 12″ (30.48cm x 30.48cm) £92.61 each
Prices shown are for supply direct from DEI in America and will be subject to import tax, shipping costs and handling fees. UK and European customers are recommended to check local DEI official dealers for prices.

To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.