Eurotuningnews.com

Webcon is pleased to announce a new fuel pressure regulator for use with carburettors which will reduce high EFi fuel pressure down to low pressure. This reduction allows a more stable high pressure/high flow, EFi type, fuel pump with a swirl pot to supply a carburettor fed engine. Thev result is a smoother, uninterrupted fuel supply which is less affected by fuel vapour lock or centrifugal forces during cornering, acceleration or braking – all without the need of an ECU or full EFi conversion.

The WFR602 Regulator can also be used with low pressure fuel pumps and is suitable for both normally aspirated or turbocharged applications with carburettor(s).

The pressure setting is variable from 1.5psi to approx 5psi (plus boost if turbocharged).

The WFR602 Regulator can safely be used with E85 alcohol fuel.

The WFR602 Regulator retails at £56.95 plus VAT and comes complete with three 1/8” NPT connectors, mounting bracket and fixings.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon has distributed the Edelbrock 1404 500cfm manual choke carburettor for over 30 years. Now, due to overwhelming demand, Webcon is including the 1403 and 1406 in its Edelbrock range.
 
Both new carburettors feature a satin finish and electric choke operation. The carburettors are supplied with new filter and base gaskets, a fuel filter and electric choke wires.
 
The 1403 is 500 cfm and is available at £464 plus VAT, and the 1406 is 600 cfm and is £447 plus VAT.
 
Webcon also supply a full range of Edelbrock Weber spares, including gaskets, insulators, floats, needle valves and tune up parts.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Now BMW 2010-2017 F10 and F11 models can have the latest G30 M5 look thanks to the new M-Style front end.

The easy to fit kit incorporates the nose and front bumper in one moulding and comes with a black grille and full air intake mesh.

The front end is £399.95 inc. VAT with fitting and painting available at extra cost if required.

To help with the current suituation M-Style is offering free postage to mainland UK addresses on this item.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

M-Style has the perfect styling touch for any BMW 4 Series. These gloss black Side Wing Vents are simple to install and will enhance the original vents with a motorsport accent.

Available as a pair:
£58.95 each inc. VAT.

To help with the current suituation M-Style is offering free postage to mainland UK addresses on this item.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

It is generally believed that the best head gaskets are made of copper, but there is more than one copper head gasket on the market.

The original Payen stamped gasket TAM2121 is now obsolete, so it’s a good job that the latest Mini Spares gasket is UK made to the original drawing specifications with latter-day improvements.

The Mini Spares gasket features perfect combustion and oil fire rings and a 3.35cc compressed volume. It will fit850/997/998/1100cc engines and, best of all, it’s cheaper than the original.

Order as part number GUG702506HG at £10.80 inc VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Many early Minis will have been retro-fitted with inertia reel seat belts, but for purists who wish to restore the original looks of their Mini or other classic, Mini Spares now offer its own static seat belt kit in traditional grey.

The kit comes with a three point adjustable belt and the appropriate length stalk for a Mini as weel as all the fixings required for installation. The kits are not handed and will fit either the left or right front seat.

Order as part number MSSB1112GREY at £33.29 inc VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Mini Spares now offers its own Brake Caliper Seal Repair Kit as a cheaper, but comparable, alternative to the genuine Lockheed kit. The kit is suitable for Minis from 1984 on that were equipped with 8.4″ discs.

This rebuild kit also fits the Midget/Sprite 1098/1275cc front disc brake calipers.

The kit includes all the large seals needed to rebuild both pistons in one caliper except for the small bridge seal between the two halves. (Available separately from Mini Spares as part 17H7679, if required).

The kit is easy to install with no special tools required. Order as part number GRK5008MS at £4.80 inc VAT.

Alternatively, Mini Spare can supply the genuine Lockheed kit as part number GRK5008.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

The Mk4 Golf and it’s other VAG siblings continues to enjoy immense popularity; this is no wonder as they are great handling cars, but there is room for some improvement which is where adjustable dampers from GAZ Suspension come into their own.

GAZ GT Dampers have adjustable damping rates which can be altered by means of an easily accessible knob on the side of the units.

GAZ can set the dampers up for general road use and they will also be suitable for occasional track slalom and sprint use, or they can even be set up for serious racing use if you wish.

GAZ dampers feature a zinc plated body to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ GT dampers for these late Nineties VAG models retail at £71.73 plus VAT each.

For further details visit the GAZ website:
www.gazshocks.com

For further details visit the GAZ website: www.gazshocks.com

The Sunbeam Alpine is a great looking and affordable classic British sports car that makes an attractive alternative to an MG or Triumph; however, like most cars that date from the Sixties some improvement can be made to the ride and handling.

GAZ now has some special adjustable dampers for the Alpine to uprate the suspension.

GAZ GT Dampers have adjustable damping rates which can be altered by means of an easily accessible knob on the side of the units.

GAZ can set the dampers up for general road use and they will also be suitable for occasional track slalom and sprint use; they can even be set up for serious racing use if you wish.

GAZ dampers feature a zinc plated body and a durable plastic sleeve to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GT dampers for the Sunbeam Alpine will also fit the Tiger and retail at £67.31 each plus VAT. They can be ordered as part number GT7-4530 (Front) and GT7-4531 (Rear).

For further details visit the GAZ website:
www.gazshocks.com

For further details visit the GAZ website: www.gazshocks.com

The MG ZR can make quite an exciting track day car and with that in mind GAZ is producing a Gold Coilover Suspension kit for the ZR.

The system may also be useful for those kit cars based on the ZR that are now becoming popular, although it would be wise to check with the particular kit’s manufacturer for suitability.

The Gaz Gold units are both height and damper rate adjustable. Ride height is adjustable through 80mm of adjustment.

The height adjusters have a coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

Damper rates are variable by means of an adjuster knob on the damper body. The GAZ Gold range comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.
GAZ Gold Race Coilovers for MG ZR start at £146.09 each plus VAT for the rear dampers and the whole kit of four with race suspension springs is available at £1013.58 plus VAT.

GAZ can also produce this kit with ‘road use’ valving if required.

For further details visit the GAZ website: www.gazshocks.com