Eurotuningnews.com

M-Style is pleased to announce it now has a range of genuine carbon fibre upgrades for the G8x models of BMW M3 and M4.

The ‘Ground Effect’ styling is designed to visually lower the car for a more dynamic look.

Carbon fibre performance style side skirts £1399.00 inc. VAT.

Carbon fibre front splitter mp style £899.00 inc. VAT.

Carbon fibre rear bumper corner splitters mp style £699.00 inc. VAT.

To complete the ‘Ground Effect’ look M-Style can also supply an Eibach Pro Kit front lowering set at £159.00 inc. VAT and a Bimecc Spacers all round kit at £149.00 inc. VAT.

M-Style also offers a fitting service. Please contact M-Style for prices.

­For further details e-mail info@mstyle.co.uk or call 0208 598 9115

The VW T4 had a long production run from 1990 to 2003 and the long nosed VR6 powered versions are particularly desirable as workhorses or camper vans or just for a mild bit of customizing.

Of course, the T4 always looks so much better when lowered, which is why GAZ has introduced a shortened, adjustable damper to improve the handling and ride when the van has been lowered.

GAZ GT Dampers will provide variable bump and rebound rates which can be adjusted to suit the conditions and driving style. The damping rates can be altered by means of an easily accessible knob on the side of the units.

All units are individually tested before leaving the factory and are covered by a two year warranty.
GAZ GT dampers for the VW T4 retail from £76.29 each plus VAT

For further details visit the GAZ website: www.gazshocks.com

The Mk2 version of the Ford Transit Connect featured a redesigned suspension. Ford may have redesigned it but leading suspension tuner GAZ has now looked for multiple ways to further improve it.

The result is a GAZ GHA suspension kit that provides extensive ride height adjustability (from 25mm to -55mm) lowering the centre of gravity for improved stance, road holding and handling.

The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are zinc plated to ensure that they remain in good order – even after considerable service.

Damper rates are also variable, by means of an adjuster knob on the damper body. The damper rate can be adjusted to suit the load being carried or for improved performance.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ Coilover Kit for the Ford Transit Connect Mk2 (2012 on) retails at £710.87 plus. VAT per kit. Order as part number GHA514L.

Mk1 Ford Transit Connect (2002-13) owners need not feel left out. GAZ produce a GHA suspension kit for that model too. Order as part number GHA514.

For further details visit the GAZ website: www.gazshocks.com

The original straight six powered Rover P5 models were heavy cars with wishbones and torsion bar suspension at the front and a live axle with semi-elliptic leaf springs at the rear. The suspension was improved on the MkII version but the car was still overweight. It was not until the lighter aluminium V8 engine was introduced on the 3.5 litre model that the weight reduced and the handling improved.

Happily, modern technology can help and GAZ are now producing fully adjustable suspension dampers for the P5.

GAZ GT Dampers will provide variable bump and rebound rates which can be adjusted to suit the conditions and driving style. The damping rates can be altered by means of an easily accessible knob on the side of the units.

GAZ can set the dampers up for general road use, but they will also be suitable for occasional track slalom and sprint use or, alternatively, they can even be set up for serious classic racing use if you so wish.

All units are individually tested before leaving the factory and are covered by a two year warranty.
GAZ GT dampers for the Rover P5 retail from £76.29 each plus VAT

For further details visit the GAZ website: www.gazshocks.com

The Reliant Scimitar, with its V6 engine and GRP bodywork, is still a highly desirable classic. GAZ GP adjustable suspension is an ideal and cost effective way to improve the handling of this popular classic

The GAZ GP suspension provides ride height adjustability from -25mm to -55mm with a coarse acme form thread for ease of adjustment. The damper units are zinc plated to ensure that they remain in good order even after considerable service.

Damper rates are variable by means of an adjuster knob on the damper body. There is also a gas cell fitted to the outer reservoir to prevent cavitation and resist fade.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ GP Coilover front suspension units can be ordered as part number GP6-2202 and retail at £100.40 each. Rears are available as GP6-2203 & GP6-2314 also at £100.40 each and silicone springs retail at £35.00 each. All prices are plus VAT.

For further details visit the GAZ website: www.gazshocks.com

GAZ Shocks has long been associated with performance suspension for various BMW models and now the company has released a GAZ Gold Coilover suspension conversion for the BMW M3 F80 model.

Ride height is adjustable through 60mm of adjustment.

The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are black zinc plated to ensure that they remain in good order even after considerable service.

Damper rates are also variable by means of an adjuster knob on the damper body. The GAZ Gold range comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ Coilover Kit for the BMW F80 M3 can be ordered as part number GGA544 and retails at £1149.49 + VAT.

NB: Later F80 cars with adaptive suspension require a ‘delete kit’ to override the ECU and prevent a ‘malfunctioning suspension’ code being given. These kits are available form several sources online.

For further details visit the GAZ website: www.gazshocks.com

In any form of endurance racing, keeping the driver hydrated is just as important as keeping the car running efficiently. Many teams in top level endurance racing, such as the 24hr du Mans and long distance rallying now use the Longacre bottle and feed tube to provide liquid to the helmeted driver.

With this in mind, heat insulation expert DEI has produced a thermal insulation kit to keep those liquids at the intended temperature for longer.

No more hot drinks when you’re racing through the desert on the Paris-Dakar Rally, or cold tea when you’re racing through the ice and snow on the Monte Carlo Rally. The DEI insulation kit insulates the entire bottle and holder as well as the drink tube.

The DEI Drink Bottle Insulation Cover is designed to be used with the Longacre Bottle 22551 and can be ordered as DEI part number 10910 at £134.42 plus import tax.

To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.

Burton Power is pleased to announce it now has an RS2000 Mk1/Mk2 / Mexico Mk2 style bellhousing that is perfect for connecting the Ford ‘Rocket’ gearbox to a variety of other Ford engines.

The bell housing comes with both left hand and right hand starter motor locations and is compatible with both RHD and LHD applications.

This bellhousing is suitable for the following engines and gearbox combinations:
Ford CVH to Type 9 5 speed gearbox or Type E 4 speed rocket gearbox
Ford SOHC Pinto to Type 9 5 speed gearbox or Type E 4 speed rocket gearbox
Ford Pre-Crossflow OHV Kent to Type 9 5 speed gearbox or Type E 4 speed rocket gearbox
Ford Crossflow OHV Kent to Type 9 5 speed gearbox or Type E 4 speed rocket gearbox
Ford Cosworth BD Series 16v to Type 9 5 speed gearbox or Type E 4 speed rocket gearbox
Ford Zetec E 16v to Type 9 5 speed gearbox or Type E 4 speed rocket gearbox
Ford Lotus Twin Cam 8v 1558cc Type 9 5 speed gearbox or Type E 4 speed rocket gearbox

It is also a suitable ‘original’ replacement in the Ford Escort Mk1 RS2000 1973-1974, Escort Mk2 RS Mexico 1975-1978 and Escort Mk2 RS2000 1976-1980.

Order as part number BH3 at £224.95 inc VAT.

For further details contact Burton Power on 0208 554 2281 or visit www.burtonpower.com

Burton Power is pleased to announce that it can now offer Reinz Head Gaskets for the 2.5 and 3.0 litre Essex V6 engines. Order as part number FV755 at £30.00 each inc. VAT.

The gaskets are suitable for the following applications:
Ford Capri Mk1/Mk2/Mk3 3.0 V6 1969-1981
Ford Granada Mk1 2.5/3.0 V6 1972-1977
Ford Transit Mk2 3.0 V6 1978-1986
Ford Zephyr Mk4 2.5 V6 1966-1972
Ford Zodiac Mk4 3.0 V6 1966-1972
Gilburn Genie 2.5/3.0 V6 1966-1969
Gilburn Invader 3.0 V6 1969-1973
Marcos GT 3.0 V6
Reliant Scimitar GT 2.5/3.0 V6 1966-1970
Reliant Scimitar GTE 3.0 V6 1968-1979
TVR 3000M, 3000S & Taimar 3.0 V6 1972-1979
TVR Tuscan 3.0 V6 1969-1971
For further details contact Burton Power on 0208 554 2281 or visit www.burtonpower.com

The Jaguar V12 from 1971 to 1995 was one of the greatest internal combustion engines ever made; it powered iconic cars such as the E-Type (XK-E), XJ12, XJ-S and several sucessful touring cars as well as 24hr du Mans GT cars. However, the un-initiated may have been put-off when it comes to tuning by the apparent complexity of the engine.

Fidanza has the solution to extract more performance from this powerhouse without touching the engine itself. A Fidanza lightweight flywheel will extract more performance from the power the engine already has.

A Fidanza lightweight flywheel is simple to install when the clutch is replaced and will bring the following benefits:

• Faster throttle response and quicker acceleration
• Additional horsepower to the wheels (reduced parasitic losses)
• Smoother, faster shifting
• Easier braking, better slowing (due to reduced rotational mass)
• Reduced clutch wear and improved efficiency (from better heat dissipation)
• Cost savings and longevity (thanks to Fidanza’s replaceable green friction plate – no need
to replace entire flywheel when worn)
• Potential for increased fuel economy (if you can keep your foot off the gas!)
• Quality and reliability (made in the USA from top grade materials)

A Fidanza lightweight flywheel for the 1971 – 1995 Jaguar V12 can be ordered as part number 119531 and retails at USD$499.99 plus shipping and tax.

For more information on Fidanza’s aluminium flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com

For further details contact sales@fidanza.com