Month: May 2017

Powerflex has just released various track control arm bushes for the current  Jaguar XJ X351(2010-).

The front suspension setup comes with both cast and aluminium lower track control arms and Powerflex offers bushes for both options.

For models with the original cast arms:
PFF27-704 FRONT LOWER TRACK CONTROL ARM INNER BUSH is made using the Black Shore A 95 material which helps to reduce unnecessary geometry movement and improve handling.  £64.68 incl. VAT per set.
and…
PFF27-705 FRONT LOWER TRACK CONTROL ARM OUTER BUSH attaches the anti-roll bar link to the control arm. £57.48 incl. VAT per set.

PFF27-702 FRONT LOWER TRACK CONTROL ARM INNER BUSH is used with the superseded aluminium arms.  £64.68 incl. VAT per set. This bush set also fits other Jaguar/Daimler models going back to the 2002 S Type. See ‘Jaguar’ listing on the Powerflex website for details.

For vehicles used in motorsports or predominately on track these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex purple 80 Shore A performance material.

Powerflex bushes offer improved reliability over the original parts and, of course, carry a Lifetime Warranty.

For more details visit www.powerflex.co.uk or call 01895 460033.

Powerflex has just launched a series of parts to fit MLB platform Audi vehicles including:

• A4 / S4 / RS4 B8 (2008 – 2016)    • A7 / S7 / RS7 (2012 – )
• A5 / S5 / RS5 (2007 – 2016)    • A8 / S8 (2010 – )
• A6 / S6 / RS6  (2011 – )    • Q5 / SQ5 (2008 – 2017)

For the front of the car Powerflex now offers on-car caster adjustment for more precise geometry alignment and control.

For the rear of the car there is a range of suspension and sub frame mounting bushes, plus diff and sub frame inserts to provide a fast and easy way to increase rear end stability and driver confidence.

As manufacturers continue to increase the stiffness of OE parts Powerflex continues to explore, test and apply techniques to increase the stiffness of its parts without compromising overall compliance. To do this Powerflex uses the latest force testing systems, carefully spec’d materials and market leading design principles.
Details of this process can be viewed at https://vimeo.com/105801280.

For vehicles used in Motorsports or predominately on track these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex purple 80 Shore A performance material.

Powerflex bushes offer improved reliability over the original parts and, of course, carry a Lifetime Warranty.
For more details visit www.powerflex.co.uk or call 01895 460033.

Late-model Mini owners can now have all the benefits of silicone heater hoses on their cars. No more perished hoses or inconvenient leaks. The latest easy-to-wipe-clean, highly durable, silicone hose kits come in blue or red to enhance and modernise your engine bay or black for a more traditional look. The hoses are suitable for the 1989 models onwards that were equipped with a plastic inline heater valve. The heater valve hose is a moulded hose as per the originals.

Order as C-GRH007 with RED, BLUE or BLACK after the part number to denote the colour required. The five part kits retail at £116.06 including VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

The heater hose that runs from the cylinder head take off to the plastic inline heater valve fitted on 998cc 1988 onwards Minis, which is included in the new Mini Spares heater hose kit, is also available as a stand alone item.

This hose is also useful on modified cars fitted with the plastic valve to enable water to be taken out of the hot end of the engine.

Order as NAM8677 with RED, BLUE or BLACK after the part number to denote the colour required. These heater outlet hoses retail at £34.60 each including VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style can now offer this complete front bumper kit for all F30/F31 LCI models with or without Park Distance Control sensors.

The package comes complete with lower grilles and air ducts.

The kit retails at £649.00 including VAT (£540.83 plus shipping for customers outside the EU)

M-Style can also offer a fitting and painting service, if required, at its Romford fitting centre.

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

M-Style can now offer this new GTR Style front lip spoiler to further enhance the looks and aerodynamics for F22 and F23 cars fitted with the M-Sport front bumper (Part #AF-0408).

The GTR Style front lip spoiler (or splitter if you prefer) is produced in top quality genuine carbon fibre and retails at £552.00 including VAT. ( £460 + shipping for customers outside the EU)

M-Style can also offer a fitting and painting service, if required, at its Romford fitting centre.

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

GAZ has recently improved the Gaz Gold suspension it offers for the Fiesta MkV Zetec by providing the protection of a black zinc coating.

As usual the GAZ units are adjustable whilst on the vehicle by means of an easily accessible side mounted adjuster knob.

The GAZ Gold range comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing and trackday conditions.

Ride height is adjustable from -25mm to -50mm. The height adjusters have a coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

The GAZ kit is suitable for road and race cars, including those that have been modified or subject to extensive power upgrades.

All the units are individually tested before leaving the factory and are covered by a 2 year warranty.

The GAZ Gold Coilover Kit for the Ford Fiesta MkV Zetec can be ordered as GGA438 at £929.07 + VAT

For further details visit the GAZ website: www.gazshocks.com

For owners looking to improve the handling of 1972 to 1980 Triumph Dolomite models, including the Sprint, GAZ can offer coilover dampers with or without the option of height adjustability.

GAZ adjustable dampers enable the damping rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.

These GAZ dampers feature a zinc plated body. Adjustable ride height versions come with coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ adjustable dampers for all models of 1972-80 Triumph Dolomite can be ordered as follows:
GS1-2266 – adjustable rate damper with fixed spring platform £56.73+VAT each.
GSO-2264 – adjustable rate damper with height adjustable spring platform £68.31+VAT each.

GAZ can also supply appropriate springs to match these dampers according to the customer’s requirements and intended use.

For further details visit the GAZ website: www.gazshocks.com

Fidanza has just released a short-throw shifter range for most popular Mitsubishi models.

A Fidanza short shifter will help sharpen and smooth the gear changes on these popular sportscars by shortening the distance between gear positions with a shorter throw.The shifters come as complete bolt-in assemblies that totally replace the original shift. All that you have to transfer is the gear knob and the gaiter boot!
Fidanza Performance Short Throw Shifters are made of 6061 billet aluminium and hardened steel.
The Mitsubishi range consists of:
Part# 891106     $173.32
2006- Mitsubishi Lancer IX (5 Speed only)
2001-2007 Mitsubishi Lancer (including Ralliart)
2003-2005 Mitsubishi Evolution VII (non reverse lockout)

Part# 891120    $173.32
2008-2009 Mitsubishi Lancer (5 Speed)

Part# 891815    $93.32
1993-2001 Mitsubishi Mirage

Part# 891823    $79.99
1989-1994 Mitsubishi Eclipse (Except 1990 model)

Part# 891895    $93.32
2000-2005 Mitsubishi Eclipse
1996-2006 Mitsubishi Evolution IV, V ,VI (except MR)
1996-2006 Mitsubishi Lancer (US Version) & Evolution, IV, V, VI Except MR (non adjustable)

For more information on Fidanza’s aluminium flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com

In the UK Fidanza products can be ordered through Cambridge Motorsport Parts.

Boom Mat XL is the latest addition to DEI’s range of damping material. Boom Mat XL is 4mm thick and is 166% thicker than its original damping material providing extreme noise damping for the most extreme commercial and sound-off competition applications.

Interior panels vibrate and generate noise. Boom Mat stops that noise by trapping it between the thick, 4 mil aluminum stiffening top skin and the asphalt free, pure butyl, noise constraining layer. The peal and stick backing will adhere to any interior surface, vertical or overhead without sagging, even in the most demanding of temperature extremes.

Boom Mat out performs the competition and is the first choice of top custom car builders, coachworks, motor-caravan and camper conversions, restoration experts and luxury car OE Manufacturers.

It is ideal as a first layer for areas with contours and bends that have vibration damping needs and provides an excellent surface for underlay and carpet or upholstery.

Boom Mat XL is completely non-hazardous and flexible – it can be applied to irregular surfaces
and easily trimmed to size with a Boom Mat Blade Lock Knife. In the automotive industry Boom Mat XL can be used on floors, inside door panels, in boot lids and inside roofs.
For commercial and industrial applications Boom Mat XL is also weatherproof and  corrosion resistant.
Kit sizes: (Prices are in USD and plus tax and shipping)
#050221 – 12-1/2″ x 24″ (2 sheets) (4.2 sq. ft.),     $54.65
#050222 – 12-1/2″ x 24″ (5 sheets) (10.4 sq. ft.),     $116.39
#050223 – 12-1/2″ x 24″ (10 sheets) (20.8 sq. ft.),      $217.68
#050224 – 12-1/2″ x 24″ (15 sheets) (31.5 sq. ft.),      $320.78

Order direct from DEI in America or search on-line for a dealer in your area at………
http://designengineering.com/storelocator/international-dealers
For more information about this and other DEI performance products, visit www.DesignEngineering.com