Month: May 2018

The Peugeot 206 (1998 on) makes an affordable track day car and achieved great rally accolades back in the early Noughties – The Peugeot 206 WRC was awarded the Autosport ‘Rally Car of the Year’ in 2002. Now GAZ offers fully adjustable rear dampers for the 206 to further improve its inherent handling ability.

GAZ dampers enable the damping rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing or rallying use if you so wish.

GAZ dampers feature a zinc plated body for longevity and a plastic cover to protect the body from mud, stones and dirt.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ GT rear dampers for the Peugeot 206 are available as part number GT4-4500 at £57.79 each plus VAT.

For further details visit the GAZ website: www.gazshocks.com

GAZ has been associated with winning rally suspension systems for many years. Now owners of the MGZR can also benefit from a GAZ Gold suspension kit that has been specifically made for rally use.

Ride height is adjustable through 60mm of adjustment and the damper units are fitted with anodised adjusters for a long life. The height adjusters have a coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

Damper rates are also variable by means of an adjuster knob on the damper body. The GAZ Gold range comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under rally conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ Gold RALLY Coilover Kit for MGZR can be ordered as part number GGA457 and retails at £965.31 plus VAT per kit.

For further details visit the GAZ website: www.gazshocks.com

Anyone restoring a Jaguar S Type from the Sixties will be reassured to know that GAZ produces fully adjustable dampers for this model to enhance the handling and improve the ride on our modern pot-holed roads.

GAZ dampers enable the damping rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.

GAZ dampers feature a zinc plated body for longevity and a plastic cover to protect the body from mud, stones and dirt.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ GT Dampers for the Jaguar S Type (3.4/3.8 litre models) are available as part number GT6-2095 and are made to order at £57.78 each plus VAT.

GAZ can produce custom made dampers for many other classics by working from either the original specifications or the original dampers. Price is dependent on application.

For further details visit the GAZ website: www.gazshocks.com

Now Ford Ka owners can benefit from a fully adjustable coilover suspension kit thanks to GAZ.

The GAZ GHA kit includes springs, front coilovers and rear struts. The GAZ damper settings can be adjusted whilst on the vehicle by means of easily accessible knobs.

Each unit is bright plated to resist corrosion.

Kit number GHA345 retails at just £597.02 plus VAT.

All units are individually tested and provided with a test print out before leaving the factory and
come with the peace of mind of a two year manufacturer’s warranty.

For further details visit the GAZ website: www.gazshocks.com

Moss Europe have interviewed  Pipey McGraw…

his builds have been fairly high profile but nobody has told his story until now.

GAZ has re-released its popular GHA adjustable coilover kit for the often overlooked classic BMW E21. Now the kit also benefits from a black zinc coating to protect it from corrosion and keep it looking good for longer.

The GAZ GHA kit includes springs, front coilovers and rear struts. The GAZ damper settings can be adjusted whilst on the vehicle by means of easily accessible knobs.

Kit number GHA396 retails at just £682.87 plus VAT.

All units are individually tested and provided with a test print out before leaving the factory and
come with the peace of mind of a two year manufacturer’s warranty.

NOTE: Donor front struts are required for this conversion.

For further details visit the GAZ website: www.gazshocks.com

Perhaps it’s down to Ken Block, but it seems that America is really embracing European performance Fords at the moment. It doesn’t really come as a surprise then that all-American company Fidanza has just released a lightweight flywheel for the Ford Focus ST.

The flywheel is made from the highest quality 6061 T6 aluminum and weighs in at around 9.5lbs (approx. 4.3 kilos).

The addition of a Fidanza lightweight flywheel delivers the following benefits…
• Faster throttle response and quicker acceleration
• Additional horsepower to the wheels (reduced parasitic losses)
• Smoother, faster shifting
• Easier braking, better slowing (due to reduced rotational mass)
• Reduced clutch wear and improved efficiency (from better heat dissipation)
• Cost savings and longevity (thanks to Fidanza’s replaceable green friction plate – no need to replace
entire flywheel when worn)
• Potential for increased fuel economy (if you can keep your foot off the gas!)
• Quality and reliability (made in the USA from top grade materials)

The flywheel can be ordered as part number 186121 and retails at US$546.12 plus shipping and import tax.

For more information on Fidanza’s aluminium flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com

• Comfortable interior at any temperature
• Quick & easy installation
• Economical insulating solution
• D-MAT thermal acoustic insulation
• Universal kit

If you own a Sprinter Van you will know how cold, loud and tinny sounding they can be.

A DEI Boom Mat sound damping and insulation kit will raise the comfort level of your van dramatically.

DEI Boom Mat kits include enough insulation and Boom Mat damping materials for side walls, and roof lining of either a short wheel base or long wheel base van. The kits include spray adhesive along with comprehensive instructions.

SHORT WHEEL BASE KIT – 050400
Includes 250 sq ft of DEI insulation, enough Boom Mat
and spray adhesive to complete the job.

LONG WHEEL BASE KIT – 050401
Includes 350 sq ft of DEI insulation, enough Boom Mat
and spray adhesive to complete the job.

Prices start at $405.27USD plus shipping and tax.

Optional floor kits also available.
050402 Sprinter Van Floor insulation kit SWB
050403 Sprinter Van Floor insulation kit LWB

Order directly from DEI in the USA or find your nearest dealer at http://www.designengineering.com//storelocator/international-dealers
A list of online retailers is also available on the DEI website: www.DesignEngineering.com
For more information about Boom Mat heat and sound solutions visit: www.DesignEngineering.com.
To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.

Burton is now stocking extra hard Powerflex Lower Engine Mount Bushes for Focus RS Mk3 models that are used as track day cars or in serious competition.

These polyurethane bushes are far more rigid than standard rubber mount bushes and are also harder than polyurethane bushes intended for ‘street’ use.

As such they are not suitable for use on daily drivers but make a big difference to serious track and race cars by preventing the engine from moving on its mountings under sudden revving or due to G forces. They also help gear changing under race conditions.

Order as PFF19-1820BLK at £47.92 each.

NOTE: Also fits Ford Focus Mk3 ST250

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

The BG Racing 6 to 3 Hole Steering Wheel PCD Adaptor comes pre-drilled with 6x70mm, 3×44.07mm and 3×50.8mm PCD bolt patterns to enable racing steering wheels to be used with the majority of aftermarket hub kits.

The adaptor is perfect for those wanting to fit a NASCAR wheel to an existing 6x70mm hub or for those wanting to make use of a 3×50.8mm PCD steering wheel in a vehicle equipped with a standard 6x70mm hub.

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo and are simple to fit using the fixing screws provided.

Price: £31.79 inc VAT. (£26.49+VAT)

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk