Month: October 2018

GAZ is now offering a lowered rear damper for the Vauxhall Nova and Opel Corsa that also provides adjustable damping and variable ride height.

The GAZ GHA dampers can be ordered individually or as part of a complete GHA adjustable suspension kit containing adjustable front and rear dampers and lowered springs. (Part number GHA 310E).

The damper settings can be adjusted whilst on the vehicle by means of easily accessible knobs to provide the optimum settings for conditions, use and driver preference.

Each damper unit is bright plated to resist corrosion. The height adjusters have a coarse acme form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.

The GAZ lowered GHA kit for the Nova and Corsa (fits both 1983-1993 and 1993on models) retails at just £525.61 plus VAT.

Also available as individual dampers. – rear part number GP6-2299 £84.29 each plus VAT.

All units are individually tested and provided with a test print out before leaving the factory and
come with the peace of mind of a two year manufacturer’s warranty.

For further details visit the GAZ website: www.gazshocks.com

GAZ is well known for its involvement in BMW motorsport both in 3 Series and Compact Cup events. Owners of 320 and 325 models of BMW E36 can enjoy the benefits of adjustable coilover suspension with this GHA kit which is suitable for road and occasional track day use.

The GAZ GHA kit includes springs, front coilovers, rear dampers and adjustable rear spring pans. The damper settings can be adjusted whilst on the vehicle by means of easily accessible knobs to provide the optimum settings for conditions, use and driver preference.

Ride height is adjustable all round by means of adjustable spring seats on the front struts and by lowered springs and GAZ height adjustable spring pans at the rear.

Each strut unit is bright plated to resist corrosion.

The GAZ GHA kit for the BMW E36 320/325 1992-1995 can be ordered as part number GHA302 and retails at just £682.87 plus VAT.

All units are individually tested and provided with a test print out before leaving the factory and
come with the peace of mind of a two year manufacturer’s warranty.

For further details visit the GAZ website: www.gazshocks.com

Fidanza, Americaʼs leading performance flywheel specialists, have a direct replacement lightweight aluminium flywheel to improve the performance of six cylinder Jaguar XJ6 models from1972 to early
1987. This flywheel will also fit 6 cylinder
Daimler Sovereign models.

The Fidanza aluminium flywheel replaces the heavy standard flywheel and improves the power-to-weight ratio making the engine more responsive and improving performance and acceleration.

The Fidanza aluminium flywheel is made from high-quality machined 6061 T6 aluminium with a 1050 steel friction surface, CNC machined fastener holes and chamfers. The friction surface of the flywheel is a replaceable steel plate, so when eventually the surface becomes worn it can be replaced without requiring a new flywheel.

Fidanza flywheels are suitable for use with just about any clutch disc material available – from organic to Kevlar and even sintered iron. The flywheels are incredibly durable and come with a heat-treated ring gear and military grade fasteners. Fidanza flywheels are equally suited for fast road, trackday and pure competition use.

Flywheel for Jaguar XJ6 engine ʻ72-ʼ87 – order as part number 119421 at US$602.19 plus tax and shipping.

READER’S DISCOUNT WHEN ORDERING DIRECTLY ONLINE: It is now possible to buy directly from Fidanza online and readers can obtain a 20% discount if they enter the promo code of “Fidanza” when ordering directly from Fidanza online.

For more information on Fidanza’s premium aluminium flywheels and other great products, call +1 440 259 5656 or visit www.fidanza.com

DEI’s Boom Mat Prep Spray is a simple one-step rust converter and neutralising spray. It converts rust to a tough, long-term protective covering and prolongs the life of any ferrous metal.
Boom Mat Prep Spray does not require any major surface preparation. It sprays on clear and dries to a black paintable surface. Boom Mat Prep Spray creates the ideal surface for installing Boom Mat acoustic and heat damping material.

FEATURES:
• One step rust neutraliser & metal primer
• Prevents rust
• Can be painted after curing
• Forms a tough resistant surface
• One 16 oz can covers 35-55 sq. ft
• Dry Time is 3-10 minutes
• Cures in 12-24 hours
Many uses including:
• Prepare metal surfaces for paint or body filler
• Automotive interiors
• Truck beds/trailers – especially boat trailers
• Wheel arch coating
• Inside doors
• Chassis/Frames
• Truck beds
• Car & van boots & floors
Non Automotive uses:
• Marine use
• Pipes
• Motor Housings
• Construction Equipment
• Patio Furniture
• Steel Appliances
• Iron Surfaces
• Nuts & Bolts
Part number: 050491 – 16oz can – Retails at $17.91 USD. Cannot be sent by air. Customers outside USA should call DEI on 001-440-930-7940 (GMT + 5 hours) for information.
To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.

Adjustable cam pulleys are essential for precise cam timing and now Burton Power can offer black Kent Cams pulleys for the SOHC Pinto engine as used in:

Ford Capri Mk1/Mk2/Mk3 1.6/2.0 1972-1987
Ford Cortina Mk3/Mk4/Mk5 1.6/2.0 1970-1982
Ford Escort Mk1 RS2000 2.0 1973-1974
Ford Escort Mk2 RS2000 2.0 & Mexico 1.6 1975-1980
Ford Granada Mk2 1.6/2.0 1977-1985
Ford Granada/Scorpio Mk3 1.8/2.0 1985-1989
Ford Sierra 1.6/1.8/2.0 1982-1989
Ford Transit Mk2/Mk3 1.6/2.0 1978-1994
TVR Tamsin 200 2.0

Order as: FT311E(BLACK) at £102.32 including VAT.

Adjustable black cam pulleys are also available for the YB engine and adjustable black timing chain sprockets are also available for CVH, BD and Zetec engines

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

The B-G Racing Mid-Rise Vehicle Ramps are perfect for multiple applications.

The ramps have 110mm of lift for quick under-body maintenance tasks. They also provide enough clearance to enable trolley jacks to safely access the lifting points of lowered vehicles.
The gentle gradient makes them suitable for use on most lowered vehicles, sports cars, rally cars and race cars.

The Mid-Rise Vehicle Ramps are produced from a durable black polypropylene (PP) and have a combined weight loading capacity of 5000kg (11000lb) as a pair.

The ramps are sold in pairs
Price: £83.99 inc. VAT

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk

Aeroflow Performance now offers the option of Stainless Steel Hose End Fittings, produced from 304 grade stainless steel, which provides superior strength and durability.

The fittings are available in a range of different sizes and angles and are perfect for use in brake and clutch assemblies.

Aeroflow Performance recommends that they are used with 200 & 250 Series PTFE lined hose.

Prices from: £13.19 inc. VAT.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com

When installing hard line or braided hose it is important to ensure the that line is properly supported and secured whilst also being insulated from vibration and protected from damage by sharp edges.

Aeroflow’s Cushioned P-Clamps are available in blue, black, and silver finishes in dash sizes ranging from -03 to -32.

Sizes -03 to -06 are supplied in packs of ten, sizes -08 to -32 are supplied in packs of five.

Mounting hole diameter measures 5.19mm (13/64″)

Prices start at £13.19 inc. VAT per pack.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com