Ford Ka owners now can benefit from a fully adjustable coilover suspension kit thanks to GAZ.
The GAZ GHA kit includes springs, front struts and rear coilovers. The GAZ damper settings can be adjusted whilst on the vehicle by means of easily accessible knobs.
Each unit is bright plated to resist corrosion.
Kit number GHA345 retails at just
£626.87 plus VAT.
All units are individually tested and provided with a test print out before leaving the factory and
come with the peace of mind of a two year manufacturer’s warranty.
For further details visit the GAZ website: www.gazshocks.com
GAZ has been the main sponsor of the BMW Compact Cup since the class first started. The class regulations dictate quite precisely the format of the GAZ suspension that can be used; however the company has now launched some variations for use in other race classes and for dedicated track day Compacts.
The kit includes adjustable coilovers for both front and rear on which the ride height can be adjusted through 60mm. The coilovers have a coarse acme form thread for ease of height adjustment and to ensure that they remain in good order even after considerable service.
Damping rates are variable by means of an adjuster knob on the damper bodies. The GAZ Gold range is designed primarily for out-and-out racing; each comes with a reservoir filled with a high viscosity index multi grade oil to reduce fade and a gas cell to prevent cavitation under harsh racing and trackday conditions. Although on Compact Cup cars the springs are precisely mandated, other springs can be supplied to the customer’s specifications according to the vehicle’s intended use (as shown.) Camber adjustable top mounts can also be supplied as required (also shown).
All the units are individually tested before leaving the factory. Although this kit converts the car to coilovers all round it is a direct replacement with no modifications necessary. The damper bodies are now finished in the new GAZ black plated coating to shrug off dirt, dust and minor gravel debris.
The GAZ coilover kit for the BMW Compact with the mounts front and rear is priced at £1300.24 + VAT.
For further details visit the GAZ website: www.gazshocks.com
If you are looking for improved performance from your classic 911 then a Fidanza lightweight flywheel is the way to go. The Fidanza design team doesn’t simply take a stock flywheel and copy it out of aluminium as do some others. Fidanza actually analyzes the originals and engineer improvements where necessary to improve overall balance, critical clearances or design. In all aspects Fidanza flywheels are built for performance.
Fidanza’s aluminium flywheels are made from the highest quality 6061 T6 aluminum for superb tensile strength, incredible heat dissipation and (of course) a reduction in weight that delivers: faster acceleration, quicker throttle response, better vehicle braking and increased clutch efficiency, as well as long lasting durability.
A Fidanza flywheel can mate with many types of clutch material, including: organic Kevlar, ceramic, metallic and sintered iron. Most companies design their flywheels so that they can be refaced. However, Fidanza makes the whole friction surface (shown in its green protective delivery coating in the image) replaceable so your flywheel will never require resurfacing or total replacement. When the friction surface wears, that alone needs to be replaced, thus saving both time and money. The pattern for the fasteners is a computer design that keeps the friction surface from warping under extreme use. Fidanza doesn’t just use more fasteners because they can, Fidanza uses them because they are needed.
Flywheel 199111 will fit the following:
Porsche 911 normally aspirated 6 cylinder 2.2, 2.4, 2.7 1970-1977.
DISCOUNT WHEN ORDERING DIRECTLY ONLINE: It is now possible to buy directly from Fidanza online and readers can obtain a 20% discount if they enter the promo code of “Fidanza” when ordering directly from Fidanza online.
For more information on Fidanza’s premium aluminium flywheels and other great products visit www.fidanza.com
Some time ago DEI recognised the need for an attractive, professional looking, insulating material for the inside of the glassfibre roof panels of small 4×4 vehicles such as the Jeep Wrangler and so produced pre-cut kits for them.
Now owners of other vehicles can also benefit from a reduction in noise levels of 3-4 decibels, as well as cooler interiors in summer and warmer interiors in winter, because DEI is now selling its headlining material in 75”x54” sheets for universal use.
The 1” thick material comes in black, it is peel and stick for easy installation and it is marine quality to resist mould and mildew whilst insulating from heat, cold and noise.
The sheets retail at $237.85 making it a cost effective DIY alternative for classic car owners rather than having a complete headlining with bows professionally fitted.
In the UK and Europe DEI’s products can be ordered from Demon-Tweeks.com.
Please contact Demon Tweeks for current UK price.
To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.
The inside of an empty van can be a noisy place but Boom Mat Flex will conform to the most complex curves to deaden vibration and noise and make your working environmemt a whole lot more comfortable.
Boom Mat Flex has the same high quality 2.5mm thick butyl rubber layer as Boom Mat Aluminium, but it also has a clear poly top surface that allows it to shape around any surface – even those that its aluminium sibling can’t.
As well as vans, Boom Mat Flex is also suitable for cars and is particularly applicable for classic cars and kit cars that lack modern insulation. It will curve around pipes and tubes and, because it is rot proof, it can also be used in wheel wells to both insulate and protect against stone chips.
Boom Mat Flex will also reduce panel vibration to improve the sound of your in-car-entertainment system and can be used under bonnet to reduce engine noise.
Boom Mat Flex is sold in packs of four 12”x12’”self adhesive sheets at $29.66 per pack.
In the UK and Europe DEI’s products can be ordered from Demon-Tweeks.com.
Please contact Demon Tweeks for current UK price.
To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.
Burton Power is pleased to announce that it can now supply silicone coolant hoses for the Ford Cortina-Lotus Mk2. The hoses are made by Samco and come in the company’s trademark blue finish, although other colours are available to special order. (including classic matt black for purists).
The multi layered reinforced construction makes the hoses perfect for replacing old rubber versions. The increased reliability and performance even in the most arduous of conditions is due in part to Samco’s light blue SamTek® lining. All Samco hoses meet, or exceed, the requirements of SAE J20 and are manufactured under an ISO 9002:2000 quality system.
The two hose kit for the Ford Lotus Cortina Mk2 1966-1970 can be ordered as part number TCS-673/C at prices from £55.50 inc. VAT. (Actual price depends on colour chosen).
Available from Burton’s Performance Centre in Essex or by ordering from the Burton Power
website – www.burtonpower.com.
For further details contact Burton Power on 0208 554 2281
Burton Power is proud to announce that it has been appointed as a dealer of the recently launched Powerflex Heritage range of polyurethane bushes for ‘modern classic’ cars from the past thirty years.
The Heritage range uses modern-day materials to enhance the performance, comfort and safety of the modern classic car. Unlike previous bush ranges, each application in the Heritage range has its own shore hardness designation to ensure improved suspension performance without discomfort or vibration. The bushes come in the new subtle ‘Classic’ Dark Grey colour to retain the standard OE look of rubber whilst offering the performance and longevity of polyurethane.
Burton offers Heritage bushes for classic Fords such as the Capri, Escort Mk1/2/3/4 and Cosworth models. Prices are according to application. Please see website for details.
for further details contact Burton Power on 0208 554 2281
www.burtonpower.com
The B-G Racing Aluminium Camber Frame 3 Pin Adaptor is designed to convert the B-G Racing Aluminium Camber Frame (BGR307) into a 3 Pin hands free measuring device.
The B-G Racing Aluminium Camber Frame 3 Pin Adaptor is produced from aluminium with a durable black powder coated finish and retails at £53.99 inc. VAT.
For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com
Brown & Geeson has over 25 years of experience of supplying steering wheels and hub kits in the UK. It was thus a natural progression for the company to launch its own range of hub kits; their range already features over 800 vehicle applications from classic to modern.
One of these is a collapsible hub kit that is suitable for both the Toyota GT86 and the Subaru BRZ. (Part number BG8234).
B-G Hub Kits are produced in Italy from the finest cast aluminium materials and are dual drilled to be compatible with various steering wheels featuring either a 6 x 70mm PCD pattern (such as MOMO, Sparco, OMP, Simoni or Mountney M-Range) or a 6 x 74mm PCD pattern (such as Nardi, Personal or Raid).
B-G Hub Kit BG8234 retails at £81.59 inc. VAT.
For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com
