Eurotuningnews.com

FOLIATEC®.com has offered Carbody Spray Film for some time now, providing enthusiasts and restorers with a means to re-colour their vehicle and then have the option to remove the film to restore the vehicle to its orginal finish if required. A clear version also proviodes protection for vehicles whilst retaining the original body colour. Now FOLIATEC®.com can provide even more protection with Carbody Spray Film 2C Sealer.

Carbody Spray Film 2C Sealer is applied in two coats on the dust-dry and grease-free Carbody Spray Film. A paint spray gun or the FOLIATEC DIY Spray System can be used. After curing, the surface  feels like it was painted by a professional painter. It can be polished and  also provides better protection against parking bumps, fingernails, key scratches and shopping trollys. Even splashes of petrol and diesel cannot harm the treated surface. Any kind of dirt can be easily removed from the sealed surface. Speaking of removing: Carbody Spray Film which has been coated with  Carbody Spray Film 2C Sealer can still be peeled off if required. In fact the application of Carbody Spray Film 2C Sealer makes the removal process even easier as the film is less likely to tear on removal.

The UV-resistant Carbody Spray Film 2C Sealer can be ordered in two different versions: either with the shimmering high-gloss finish or in an aggressive matt look. So if you already use  Carbody Spray Film or if you were not sure if it would survive the hard daily routine, you can now breathe a sigh of relief, because FOLIATEC®.com now provides you with double the protection of Carbody Spray Film.

You will find even more inspiration and product information on www.foliatec.com and www.facebook.com/FOLIATEC Moreover check out www.instagram.com/official_foliatec and our YouTube channel: www.youtube.com/foliatec01

More often than not, SUVs are only driven on roads. For that reason manufacturers are focusing both on ride comfort and the off-road ability, even if this function is seldom used in everyday life. A prominent representative of the SUV segment is the Range Rover Evoque. The right accessories for this high-performance SUV can be purchased from Rameder, Europe’s market leader in towbars and transport solutions, at www.rameder.eu.

With the right retrofitted towbar, the Evoque can pull any trailer safely and reliably. The rigid towbar (including the electrical kit) can tow a trailer load of 1800 kg and carry a vertical tow ball load of 150 kg and is  available for EUR 182.99. The practical Towbar-finder function at Rameder will quickly take you to the right model.

Rameder makes available also all the necessary accessories to make the Range Rover Evoque a genuine all-rounder. For example, there is a large selection of Bike carriers for mounting to the towbar. In addition to the uncomplicated mounting, they allow easy loading of bikes, since they only need to be lifted to the level of the towbar. In addition, the carriers take optimal advantage of the slipstream. Perfect for safely transporting bicycles or e-bikes.

In the well-stocked Rameder online-shop, available at www.rameder.eu, you can find many other car-related products, in a diversified range of categories.

Please do also visit us on Facebook at www.facebook.com/rameder.de

… or on Google+: plus.google.com/s/rameder

Even in today’s digital world there are times when a pen and paper is the best solution and that’s why B-G Racing has just produced these useful pit record sheets.

BG Racing Chassis Set Up Sheets
The B-G Racing Chassis Set Up Sheets are a vital component of any event. They allow the racer to maximise the amount of information recorded in an intuitive, user friendly manner.
There are boxes to record all the important aspects of the chassis set up thus providing invaluable information that can be drawn upon at future events.
• Supplied as a pad of 50 sheets
• 2x hole punched for filing in ring binder
• Glued on long edge for easy tear off
Price: £10.79 inc VAT.

BG Racing Lap Timing Sheets
These record sheets enable the pit crew to easily keep track of driver’s lap times and position along with other vital information such as tyre pressures and temperatures at four different stages, track temperature, ambient temperature, weather, fuel load, consumption, etc.

They are suitable for use in all sessions through practicse, qualifying and race and provide an invaluable ‘at-a-glance’ record that can be refered to throughout current and future events.
• Supplied as a pad of 50 sheets
• 2x hole punched for filing in ring binder
• Glued on long edge for easy tear off
Price: £10.79 inc VAT.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk

The B-G Racing Scale Pad Levelling Trays are a key component of the B-G Racing modular scale system.

The Levelling Trays are produced from mild steel with a durable powder coated finish and feature four high quality steel swivel feet with 75mm of adjustment to ensure complete accuracy. The feet can also be removed for ease of storage and transportation.

The Levelling Trays are suitable for use with 2.5” to 3” scale pads and have been designed specifically for the B-G Racing Modular Scale Pad Roll Off Platforms to attach to part number BGR353 (although other scale pads can be used).
Retail Price: £509.99 inc. VAT

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk

For many years, Webcon has supplied the finest quality DCOE mounting cups and grommets individually to allow some flexibility in the carburettor’s mounting. These are now available in handy complete carburettor sets.
The cup washers are manufactured to a very specific thickness and depth and yellow passivate coated. The grommets are manufactured to Webcon’s very specific levels of hardness and flexibility. Both parts are designed to offer outstanding performance in the most demanding of conditions and should not be confused with inferior versions that are on the market.

Part number 9900557100W4 is priced at £9.91 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon now manufactures a heat shield for use on the Weber DCOE and DCO/SP range of carburettors.

On non-crossflow engines the carburettors are directly above the exhaust manifold. When exhaust heat rises up it can cause fuel handling problems in sidedraft carburettors. The new Webcon Heat Shield helps alleviate these problems by deflecting the heat around the carburettor.

The new Webcon Heat Shield is superbly made in the UK from 1.6mm Stainless Steel.

The part number 9990398700 is stamped with the Webcon logo to easily distinguish it from the thinner, less effective copies on the market.

The new Webcon Heat Shield retails at £14.95 plus vat. One heat shield is required per carburettor

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Powerflex has just launched a number of front suspension parts for the VAG family of SUV PL71 platform based vehicles: VW Touareg, Porsche Cayenne and Audi Q7.

Although replacement OE bushes are available, the original parts commonly fail due to high torsional loads and the natural degradation of rubber which, on a big heavy vehicle such as these can lead to imprecise steering, braking instability and expensive uneven tyre wear. By replacing the worn rubber parts with the Powerflex polyurethane bushes you can experience immediate and lasting improvements to these problems.

PFF85-1601 Front Lower Wishbone Front Bush: £55.08 pair
PFF85-1602 Front Lower Wishbone Rear Bush – for cast aluminium wishbones: £65.88 pair
PFF85-1702 Front Lower Wishbone Rear Bush – for cast steel wishbones: £58.68 pair
PFF85-1604 Front Wishbone Upper Bush: £102.96 per set of 4. All prices incl. VAT

For vehicles used in motorsports or predominately on track these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex purple 80 Shore A performance material.

All Powerflex bushes, of course, carry a Lifetime Warranty.
For more details visit www.powerflex.co.uk or call 01895 460033.

Powerflex is pleased to announce its new front suspension bushes for the Honda Civic Mk10 2016 onwards.

PFF25-1001 Front Arm Front Bush is developed using our 95A durometer material that boasts 25% increased stiffness over the Powerflex purple 80 Shore A performance material which helps to improve handling and braking stability. Retail price: £59.98 per pair incl. VAT

PFF25-1002 Front Arm Rear Bush is a dual-durometer design that allows free rotation, that avoids torsional twist in the material which is the main cause of failure for the OE rubber bush.
Retail price: £86.28 per pair incl. VAT

Powerflex bushes aren’t just performance upgrade products. Powerflex bushes commonly serve as fit-and-forget replacement solutions with a Lifetime Warranty for added peace of mind.

For more details visit www.powerflex.co.uk or call 01895 460033.

Powerflex is pleased to announce a new engine mount insert to fit vehicles from the VAG PQ35 platform range including the VW Golf 5 & 6, Scirocco, Jetta, Passat, Audi A3, S3 and TT as well as many others. (A full listing can be found on the Powerflex website)

The original rubber mount often degrades and softens over time, allowing excessive movement of the engine that leads to a premature failure. Up until now the only options have been to replace the worn out mounts with new standard mounts or upgrade to expensive aftermarket mounts that promote excessive NVH levels.

The Powerflex insert is an easy-to-fit intermediate solution to the above-mentioned problems.

PFF85-532 Upper Engine Mount Insert is designed to fit into the void in the original rubber mount to stiffen it and minimise unwanted engine movement. £34.50 incl. VAT

For vehicles used in motorsports or predominately on track these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex purple 80 Shore A performance material.

All Powerflex bushes, of course, carry a Lifetime Warranty.
For more details visit www.powerflex.co.uk or call 01895 460033.

Moss Europe has announced new 5 speed gearbox conversion kits for the MGA and MGB.

The kits are based on a brand new Mazda MX-5 gearbox and give the MGA and MGB the slick gear changes that have become synonymous with the MX-5, together with a 5th gear for relaxed cruising.

The kits are supplied with a fully assembled gearbox with a bespoke cast bell housing and casing designed to fit directly to the MG’s engine back plate. The bell housing flange has been designed to resemble the standard gearbox thus preserving engine bay originality.

Each conversion kit uses the flywheel applicable to the engine, an appropriate clutch cover and a Mazda OE clutch plate. The installation on the MGA does require the removal of existing gearbox mounts and the enlarging of the gearbox tunnel aperture but for the MGB there is neither cutting nor permanent modifications required. Full instructions are included.

Kits include: • Brand new Mazda 5 Speed gearbox assembled into custom casing & bell housing • Concentric clutch slave cylinder assembled with pipework • Mazda OE clutch plate • Mazda OE gear knob • Custom gearbox mountings • Speedo drive & cable • Bespoke propshaft • all parts & hardware required for installation. The gearboxes are prefilled with SAE 75W-90 oil.

Kits are available for high and low starter MGAs, 3 bearing MGB 1962-65 and 5 bearing MGB 1965-68. All retail at £2,700.00. Kits are also available for cars with engine conversions.

For more details contact Moss Europe Ltd, on +44 (0) 20 8867 2000
or visit their website: www.moss-europe.co.uk