Tripling the range of e-transporters
ABT e-Line brings the fuel cell into series production

Vans with combustion engines emit considerable amounts of CO2. Although battery-based electric drives are locally emission-free, they are only an alternative within certain range limits and recharging takes a lot of time. After all, daily distances of 800 km are common in express logistics, for example, which would require battery sizes of 300 kWh without a charging stop. A comparison with the passenger car sector shows that this is not feasible in the van class. There, electric cars rarely have battery capacities of more than 100 kWh, even in the premium segment. “We therefore see a sensible area of application for the hydrogen fuel cell in long-distance logistics,” says Eric Plekkepoel, CEO of ABT e-Line GmbH, a subsidiary of the ABT Group that specialises in alternative drives. The company has gained a lot of experience in the integration of fuel cell drives in two large Tier 1 projects in the last three years. In the next step, two series-produced e-transporters were converted as demonstrator vehicles with this technology. These were presented for the first time at the IAA Transportation trade fair in Hanover at the end of September. The market demand is so great that ABT e-Line decided to start series development with partners.

When setting up the demonstrator vehicles, the Kempten-based company took over the vehicle integration of the fuel cell system, the safety concept of the entire vehicle, the complete manufacturing process and the road approval. Furthermore, a 700-bar hydrogen tank system was integrated. Two to seven storage tanks can be refuelled in a few minutes. Due to the vehicle architecture and the available installation space, the conversions were a challenge. However, the effort was more than worth it: by implementing the new drive concept, a range increase of several hundred kilometres was achieved. Refuelling is now even necessary later than with comparable diesel models.
Even if the future of mobility will be predominantly battery-electric for efficiency reasons, the fuel cell offers enormous potential for niche applications, especially in the van sector. The energy density typical of hydrogen, which is far from being possible with current battery technology, is a real USP here when range is important. In addition, refuelling is much quicker than recharging batteries. ABT e-Line takes on the role of a technology driver and expert for the conception and realisation of market-ready small series for fuel cell drives.

Webcon EFi Crank Sensor for Ford X-Flow engines (including Lotus Twin Cam)

More and more classic car owners are turning to EFi for improved starting, economy, reliability and performance. In response to customer requests Webcon has just added a complete crank sensor/trigger kit for the ever-popular Ford Crossflow engine to its line up.The kit comes complete with trigger wheel, sensor and all the fitting hardware plus comprehensive instructions to make the installation a straight-forward DIY operation.

The kit is suitable for all Ford Crossflow engines including the Lotus Twin Cam.

Product code: 9990291400. Retail price £150.73 plus VAT

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon Service Kit for Twin DCOE Weber Carburettors

Webcon is pleased to announce that it now offers a complete service kit for a pair of Weber
38/40/45 DCOE carburettors.

The kit contains gaskets, seals, ‘O’ rings and needle valves to overhaul a pair of DCOE carburettors and comes complete with a full part identification guide to ensure you correctly locate and service all of the numerous replaceable parts in your carburettors.

Product Code: 9300150502 Price is £67.50 plusVAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Original Type Webcon Ignition Coil for Ford Cosworth, Maserati and Fiat/Lancia

Webcon have just reintroduced the original Weber Marelli type BAE504F ignition coil.

This type of coil is best known for its use on the Ford Cosworth but it was also used on Maserati and Fiat/Lancia applications,

Unfortunately, over the years, many cheap and dubious copies have appeared on the market. However, now that the original type Weber Marelli coil is available again from Webcon, owners can be assured of the OE levels of performance from their ignition system that comes with fitting the genuine article.

Order as part number WIC044, priced at £62.12 plus VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Mini Spares Heated and Top Tinted Windscreen for all classic Minis

The top tint, heated front windscreen with hidden element from Mini Spares will visually upgrade any Mini (or kit car using a Mini front screen) whilst rapidly resolving any misting or frost problem.

The screen is easy to fit – Mini Spares can also supply an illuminated switch, a relay and windscreen fitting tools.

Order the top tint, heated front windscreen as part number MS85A at £114.00 inc VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Mini Spares Poly Upgrade Track Rod End/Knuckle Gaiter

It’s important to keep a Mini’s steering and suspension gaiters in good condition to prevent road grit and debris from damaging the joint within. That’s why they should be replaced at the first sign of a split or suggestion of perishing perishing.

Diligence is needed as, unfortunately, original rubber gaiters are prone to splitting and if subject to oil contamination can quickly perish.

Thankfully, Mini Spares has come up with polyurethane upgraded gaiters for all knuckle joints and many track rod ends. These greatly reduce the chances of splitting and eliminate the problem of perishing.

It should be noted that this gaiter may not fit every track rod end because over the past 55 years many ‘pattern’ track rod ends have been produced; however, it will fit every genuine Mini suspension knuckle ball joint (part no GSV1118) ever made.

Order as 21A425EVO at £2.52 inc VAT each.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Mini Spares Rocker Cover for all classic Minis

Mini Spares has just released a brand new alloy rocker cover which has been manufactured to fit all classic Mini heads. It is a brilliant new design by Richard at Mini Spares (York) based on extensive experience of the Mini ‘A’ Series engine.

It includes arecess for the extra bolts that are required if it is being fitted to an eleven stud head (the cover works perfectly with both the 9 stud and 11 stud gasket).

It has also been designed to clear all Mini Spares 1.5 rockers and it features ribs at the ends and on the top for quietness and to ensure that the gasket seats properly.

Order as part number ROCKERCVR01 which comes with a tethered filler cap as shown.
Price: £60.76 inc VAT

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style G30 Carbon Fibre Full Bodykit

M-Style is pleased to be able to offer this excellent carbon fibre complete body kit for M-Sport models of the BMW G30 Five-Series saloon.

The kit includes:
Front splitter
Rear diffuser
Side skirt under splitters
Rear boot spoiler

We all know that genuine carbon fibre is expensive, so it may come as a surprise that this M-Style kit is available at just £1306 including VAT.
M-Style can also provide a full fitting service at a reasonable price at its Romford based fitting centre.

To complete the ‘executive look’ M-Style also offers a gloss black grille, performance exhausts and a wide selection of alloy wheels.

­For further details e-mail info@mstyle.co.uk or call 0208 598 9115

GAZ GT Adjustable Dampers for classic VW Beetle 1300 & 1500

Winter’s here and by now most classics will be tucked up in their garages undergoing a seasonal refurb.

So it’s the ideal time to remind everyone about GAZ adjustable GT dampers for the VW Beetle 1300 and 1500.

GAZ fully adjustable GT dampers enable the damping bump and rebound rate to be adjusted to suit the conditions, load and driving style. The damping rates can be altered by means of an easily accessible knob on the side of the units.

GAZ can set these dampers up for general road use or for serious classic racing if that’s your preference.

GAZ dampers feature a zinc plated body and protective plastic sleeve to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ rear dampers for the 1300 & 1500 Beetle can be ordered as GT6-2303 at £63.70 each + VAT and front dampers are part number GT6-2302, also at £63.70 each + VAT.

These part numbers will fit 1300 & 1500 Beetles from 8/1965 to 1979 and all Karmann Ghia models with swing axle. (1302 and 1303 models use a different part number – also available from GAZ)

For further details visit the GAZ website: www.gazshocks.com

GAZ Adjustable Top Mounts for Peugeot 205/Talbot Sunbeam

GAZ is now offering eccentric alloy top mounts to firm up the suspension struts’ location points on Peugeot 205 and Talbot Sunbeam competition and trackday cars. The alloy mounts also provide the opportunity to adjust the camber on these cars by rotating the plate around the mounting bolts using the multiple bolt holes provided.

These CNC machined alloy billet top mounts come complete with a ready fitted centre bearing and spacer plate. Either “Peugeot 205” or “Talbot Sunbeam” is embossed, as appropriate, on the top mounts.

GAZ top mounts are ideal for racing and dedicated track day cars but would probably be too harsh for cars used daily on the road.

GAZ Adjustable Eccentric Alloy Top Mounts for Peugeot 205 and Talbot Sunbeam retail at £138.98 per pair + carriage & VAT.

For further details visit the GAZ website:
www.gazshocks.com