Powerflex Lancia Integrale 16v Bushes and Mounts

Powerflex Lancia Integrale 16v Bushes and Mounts1

More than 20 years have now passed since production of the Lancia Delta Integrale ceased and the car has cemented its status as a true ‘modern classic’.

Powerflex has recently added even more parts to its listings for the Lancia Integrale 16v. With original parts becoming harder to find and the costs rising, upgrading to Powerflex components is a cost-effective alternative to replace ageing rubber parts.

The new introductions include parts for the anti-roll bar, steering rack, engine mounts, transmission and diff mountings as well as including parts to enable adjustment of the suspension geometry.

A full list can be found on the Powerflex.co.uk website. Prices start at £18.89 for a PowerAlign Camber Bolt Set rising to a top price of £124.56 for a complete Rear Toe Adjuster Arm Bush Set.

For vehicles used in Motorsports or predominately on track, these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex Purple 80 Shore A performance material.

Powerflex bushes offer improved reliability over the original parts and, of course, carry a Lifetime Warranty.

For more details visit www.powerflex.co.uk or call 01895 460033.

Mini Spares Sealed Beam Headlamp Light Unit – For Classic Minis to 1990

Mini Spares Sealed Beam Headlamp Light Unit

Mini Spares can now offer original style sealed beam headlamps as used on classic Minis as well as many other British classics.

The sealed beam lamps include a pilot light and were probably the most common right hand drive light unit used on Minis up to 1990.

Order as part number 13H3471A. Sold singly, 2 required per car.

Retail price: £11.52 inc vat
See minispares.com for current Euro and Dollar pricing.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style wing vent trims for BMW F15 X5 and F85 X5M

M-Style wing vent trims for BMW F15 X5 and F85 X5M

M-Style can now offer two different wing vent trims for all BMW F15 X5 and F85 X5M models.

Customers can choose from genuine carbon fibre wing vent trims at £289.00 per pair incl. VAT
or gloss black wing vent trims at £185.00 per pair incl. VAT

M-Style can also provide a fitting service if required at £40.00 including VAT.

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

M-Style BMW F82 / F83 M4 Carbon Seat Back Covers

M-Style BMW F82 / F83 M4 Carbon Seat Back Covers

M-Style has just released a genuine carbon fibre seat back set for all BMW F82 and F83 M4 models.

The set consists of a pair of front seat back covers and a pair of rear headrest covers. The set retails at £695.00 including VAT.

M-Style can also provide a fitting service at its Romford fitting centre if required at £120.00 including VAT.

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

M-Style – Depo V3 LED angel eye headlights for BMW E90 / E91

M-Style – Depo V3 LED angel eye headlights for BMW E90 / E91

M-Style can now offer Depo V3 LED angel eye headlamps with powerful LED angel-eye rings for all E90 and E91 models that came with halogen headlamps.

With a retail price of just £299.00 per pair including VAT this M-Style upgrade represents a massive saving over the factory headlamp upgrade option.

M-Style can also provide a fitting service if required at £120.00 including VAT.

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

Foliatec Thinners makes Brake Caliper Lacquers sprayable

Foliatec Thinners makes Brake Caliper Lacquers sprayable

FOLIATEC®.com offers a range of 25 different Brake Caliper Lacquer colours. Each can comes with a brush but for those who demand smooth perfection the new Brake Caliper Lacquer Thinner allows the Brake Caliper Lacquer to be sprayed on.

FOLIATEC®.com Brake Caliper Lacquers are heat-resistant and seal and preserve the surface. This makes them not only look good for much longer but they also protect brake calipers from chemicals, rust and oil.

Now you have a choice of applying the thick lacquer easily and precisely with a brush or thin to an ideal viscosity with FOLIATEC®.com’s specially developed Brake Caliper Lacquer Thinner and use a spray gun.

FOLIATEC®.com’s Brake Caliper Lacquer Thinners will also be ideal for throughly cleaning your spray gun after use. The RRP is £6.99

Order on-line from www.foliatec.co.uk.
Visit www.foliatecuk.co.uk to find a dealer near you.

MORE!!!
For more inspiration and product information visit www.foliatec.com and www.facebook.com/FOLIATEC.
Be sure to also check out www.instagram.com/official_foliatec and YouTube channel: www.youtube.com/foliatec01

­GAZ Adjustable Strut Inserts for Citroen Saxo and Peugeot 106

­GAZ Adjustable Strut Inserts for Citroen Saxo and Peugeot 106

The 1996-on Citroen Saxo and Peugeot 106 are still popular track day cars and are ripe for modifications – non more so than in the handling department.

GAZ adjustable strut inserts enable the damping rate to be adjusted to suit the conditions and driving style by means of an easily accessible removable knob on the top mounting pin.

GAZ set the inserts up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use.

GAZ strut inserts feature a zinc plated body to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ adjustable strut inserts for the Citroen Saxo and Peugeot 106 retail at £87.80 each plus VAT.
Order as part number: GAI3004

For further details visit the GAZ website: www.gazshocks.com

­GAZ Adjustable Dampers for Ford Cortina Mk 3, 4 and 5

­GAZ Adjustable Dampers for Ford Cortina Mk 3, 4 and 5

The later Cortina models don’t seem to have the same following as the Mk1 and 2. Maybe it’s something to do with the handling not being as sharp? If so, GAZ can help with that problem as fully adjustable GT dampers are now available for the Cortina Mk 3, 4 and 5.

GAZ fully adjustable GT dampers enable the damping bump and rebound rate to be adjusted to suit the conditions and driving style by means of an easily accessible knob on the side.

GAZ can set the dampers up with valving for general road use and they will also be suitable for the occasional track slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.

GAZ GT dampers feature a zinc plated body and have a protective plastic sleeve to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ adjustable dampers for the Cortina Mk 3, 4 and 5 retail at £57.78 each plus VAT.
Order as GT6-2059 for front and GT6-2060 for the rear.
These rear dampers will also fit estate car versions.

For further details visit the GAZ website: www.gazshocks.com

Fidanza Lightweight Flywheel for Audi RS4

Fidanza Lightweight Flywheel for Audi RS4

Want some extra performance from your RS4?

The team at Fidanza has just come up with a lightweight flywheel for the RS4 B5 series 1997-2002 but which also fits the B5 series S4, that will deliver the following benefits:

• Faster throttle response and quicker acceleration
• Additional horsepower to the wheels (reduced parasitic losses)
• Smoother, faster shifting
• Easier braking, better slowing (due to reduced rotational mass)
• Reduced clutch wear and improved efficiency (from better heat dissipation)
• Cost savings and longevity (thanks to Fidanza’s replaceable green friction plate – no need to replace
entire flywheel when worn)
• Potential for increased fuel economy (if you can keep your foot off the gas!)
• Quality and reliability (made in the USA from top grade materials)

The Fidanza flywheel can be ordered as part number 112621 at USD $546.12 plus shipping and tax.

For more information on Fidanza’s aluminium flywheels, adjustable cam gears, premium clutches and other great products, or to find a dealer in your area, visit www.fidanza.com

In the UK Fidanza products can be ordered through Cambridge Motorsport Parts or Fensport.

DEI’s Form-A-Shield

DEI’s Form-A-Shield

Crawl underneath or look under the bonnet of almost any modern car and you’ll find dimpled aluminium heat shields protecting the passenger compartment and delicate components from heat. Now, thanks to DEI, you can have that same protection on your classic, street rod, camper van, boat or kit car.

DEI’s Form-A-Shield is made from 10mm thick dimpled aluminium with a ¼” (6.35mm) thick high temperature basalt insulation. Form-A-Shield can withstand direct temperatures in excess of 1400˚F (760˚ C) so it can be applied directly to high temperature sources such as exhausts and turbos.

It can be easily moulded to fit around cast exhaust manifolds, pipes and silencers and provides outstanding performance in reflecting and blocking heat.

It can be fixed in place to floors, panels and firewalls with DEI’s 010490 Spray Adhesive or mechanically fastened with DEI metal ties.

DEI’s Form-A-Shield is available in two sizes:
Part number: 050516 42” x 48” (106.68cm x 121.92 cm) USD $175.26 MSRP and
Part Number: 050517 21” x 48” (53.34cm x 121.92 cm USD $90.67 MSRP.

Order direct from DEI in America, or you can search on-line for a dealer in your area at………
http://designengineering.com/storeloc…/international-dealers

For more information about this and other DEI performance products, visit www.DesignEngineering.com