New to the Webcon range of ignition components is this ignition coil specifically for Jaguar V12 engines in the Jaguar XJ12 manufactured between 1968 and 1996, and the XJS V12 manufactured between 1988 and 1993.
The coil has been produced to original equipment standards by Magneti Marelli and is available as Webcon part number WIC144.
The Webcon Coil WIC144 is available from stock and is very competitively priced at just £46.58 plus VAT.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
Burton Power is pleased to announce that the ATB limited slip differentials made exclusively for Burton by Quaife are now available for numerous front wheel drive Ford applications.
The Quaife ATB is a direct replacement for the standard, factory ‘open’ differential and differs from other LSD units in that it uses gears rather than clutch plates for its operation. To the driver, especially of a front-wheel drive car, the result is significant; the superior traction eliminates the harsh steering wheel snatch or torque steer that have long been associated with performance differentials.
The Quaife ATB helical gear limited slip differential provides a safe, progressive, seamless action, and never ‘locks’. Controlled power is transmitted to all driven wheels to maximise traction and minimise wheel spin, particularly in slippery conditions. The differential eliminates unwanted understeer or oversteer and works in harmony with the factory OEM electronic stability programmes. It also improves braking performance by reducing braking lock ups and minimises ABS intrusion. Being gear operated there are no clutch plates to replace – ever!
The Burton/Quaife QUALSD3 differential is a direct fit to Ford Escort, Fiesta, Focus 1.4/1.8, Ka, Puma and ST150 and retails at £616.00 inc. VAT.
for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
For decades the Weber 40DCOE151 has been the performance carburettor of choice for most engine tuners. However, if a more ‘period’ look was desired the only choice, until now, was to obtain an often worn out second hand unit and rebuild it. But not any more!
Webcon is delighted to announce the reintroduction of the Weber 40DCOE18, a carburettor that is well known as being original equipment on the 1960s Lotus Elan, but which is now being manufactured in uprated K spec. (Denoted by the ‘K’ suffix on the new part number).
The 40DCOE18K is supplied as part number 1955012200 and comes with the specification below:
Venturi 32mm Aux. Vent 3.5 Main Jet 125 Air Corrector 220 E Tube F11 Idle jet 50F11 Pump Jet 45 Needle Valve 175
Part number 1955012200 is available at £573.42 plus VAT.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
Weber’s 32/36DGV carburettor has been around for decades and many of the originals are still going strong. However, if your 32/36 is worn or has been damaged there is no need to buy a complete new carburettor.
Webcon has the largest range of genuine Spanish Weber carburetor top cover assemblies available and is pleased to announce a new replacement top cover to suit the ever popular Weber 32/36DGV.
The replacement top cover comes already assembled as part number 3171613200 and is supplied complete with:
Cover
Choke plates and shaft
Power valve
Float
Needle valve … and even the Gasket 3171613200 is priced at £127.27 plus VAT.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
Webcon has the world’s largest range of manifolds available, and now, by popular demand, the legendary Jaguar V12 has been added to the list.
This six piece twin choke manifold set has been made to the same superb standards customers have come to expect from Webcon. The set is made in England and is suitable for Weber 40IDF carburettors and throttle bodies, although it can also be ported to suit the 44 and 48mm versions.
The Webcon V12 manifold set is available as part number MM4480MF and is priced at £940.85 plus VAT
Linkage packs are also available to suit as follows: PRE HE part number LT4480 £465.48 plus VAT HE part number LT4480HE £492.46 plus VAT
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
Webcon is pleased to announce the re- introduction of two inlet manifolds to allow fitment of a Weber DCOE carburettor to the ever popular BMC ‘A’ Series engine.
Both manifolds are superbly manufactured in the UK, and come complete with a set of studs, nuts and softmounts.
The manifolds are available in 4 inch or 6 inch lengths, as follows:
Length Part No Price 4 inch MMW4050 £257.12 plus VAT 6 inch MW4030 £257.12 plus VAT
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
Mini Spares has just released a revised parts catalogue that covers the whole production run of the classic Mini from its launch in 1959 to the year 2000.
The latest edition of the catalogue has been designed for use in conjunction with the minispares.com website and shows latest prices and availability.
It is 15 years since the last ‘AKM2 Mini Bible’ was published. Over two years work has gone into this latest , comprehensive parts catalogue which includes 217 pages of drawings, technical data, identification of parts and up to date part numbers for mechanical, body and trim parts.
This new catalogue is an essential tool in helping identify classic Mini parts. This 8th edition of the ‘Mini Bible’ is on sale now to celebrate the Mini Spares 50th anniversary.
Order as AKM2 at just £9.50. VAT zero rate in UK.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Mini Spares is fifty years old this year and to celebrate this anniversary it has produced an exclusive T-Shirt.
This quality T-shirt is available in various sizes and features a classic Mini with the Mini Spares heart on the front and the official MINI SPARES 50 YEARS – ESTABLISHED 1975 logo on the back.
The T-shirt is ideal wear at classic car shows or just for cruising in your classic Mini.
Available as follows: Small Youth Order as: TSHIRT09BLUE01 £10.16 inc. VAT Small Order as: TSHIRT11-SMALL £10.00 inc. VAT Medium Order as: TSHIRT11-MEDIUM £10.00 inc. VAT Large: Order as: TSHIRT11-LARGE £10.00 inc. VAT XXL Order as: TSHIRT11-XXL £10.00 inc. VAT
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Ford’s Zetec E engines came with a plastic thermostat housing which had a tendency to leak. Fortunately, Burton Power has the remedy in the form of a heavy duty replacement thermostat housing made from cast aluminium instead of the usual plastic.
The aluminium housing is a direct replacement on ‘silver top’ engines. The housing can also be used on ‘black top’ engines by using Screw-in Coolant Sensor XTT221 and Sender Blanking Bung FP503. (The screw-in coolant sensor is far more reliable than the factory push-in type).
Order the thermostat housing as part number PROPCB2 at £51.95 (inc VAT)
Suitable for ‘silver top’ engines in: Ford Escort Mk5/6, Fiesta Mk3, Mondeo Mk1/2 and can be fitted to ‘black top’ engines in: Mondeo Mk2, Focus Mk1 and Ford Cougar 2.0 1998–2002.
The Burton Thermostat Housing is supplied without a thermostat, but a thermostat can be purchased from Burton as part No. QTH578K at £9.50 inc. VAT. .
for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
Certain Ford models used a two piece propshaft instead of the more usual single shaft. A strong vibration and drumming from under the middle of the car is fair warning that the centre bearing is failing and is not to be ignored.
Fortunately, Burton has just added its own replacement centre bearing to its extensive range of parts to help keep classic Fords where they should be – on the road..
This bearing is a faithful reproduction of the original and can be ordered as part number PROPCB2 at £51.95 (inc VAT).
Suitable for : All Sierra models (except Cosworth and 4wd), plus, Escort Mk5/Mk6 1.6, 1.8 16v, XR3i 4×4, RS2000 4×4 and Consul/Granada/Scorpio.
for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
