Author: jp

Burton Power can now provide a Powergrip toothed belt conversion for the alternator and water pump on a Ford SOHC Pinto engine.

The alternator pulley in this new Burton kit will fit 15mm alternator shafts although Burton can also provide a similar version for 17mm shafts (use part number: FT1054K/17).

Drive ratios are 1.08:1 for the water pump and 1.86:1 for the alternator.

Order the complete kit comprising crankshaft, water pump and alternator pulleys, and toothed belt as part number FT1054K at £204.95 incl. VAT.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Burton Power is offering a limited number of brand new genuine Ford bare cylinder heads for the 2.0/2.3 Duratec HE I4 engines.

These incorporate the preferred hi-port design (RF6S4E casting mark) which has the ability for a greater flow than the low port design.

The Burton High Port Cylinder Heads are for the non-VVT engine type and are supplied bare but are factory fitted with valve guides and valve seats.

Order as part number RF6S4E at £1,020.00 incl. VAT.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Burton Power can now provide a Powergrip toothed belt conversion for the alternator and water pump on a Ford SOHC Pinto engine.

The alternator pulley in this new Burton kit will fit 15mm alternator shafts although Burton can also provide a similar version for 17mm shafts (use part number: FT1054K/17).

Drive ratios are 1.08:1 for the water pump and 1.86:1 for the alternator.

Order the complete kit comprising crankshaft, water pump and alternator pulleys and toother belt as part number FT1054K at £204.95 Inc. VAT.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Burton Power are offering a limited number of brand new genuine Ford bare cylinder heads for the 2.0/2.3 Duratec HE I4 engines.

These are the preferred hi-port design (RF6S4E casting mark) which have the ability for a greater flow than the low port design.

These are for the Non-VVT engine type and are supplied bare but with factory fitted with valve guides and valve seats.

Order as part number RF6S4E at £1,020.00 incl. VAT.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

As a result of customer feedback, Webcon is pleased to introduce a specific 40DCOE manifold for the Datsun 240/260 and 280.

Like the 45mm version, MW4700-40 is made by Webcon in the UK; it is ideally suited to road cars with standard engines, where low down torque and mid range driveability are the primary considerations.

MW4700-40 is one of the finest manifolds available for the Datsun Z and is supplied complete with linkage and soft-mounts priced at just £866.25 plus VAT.

MW4700 is also available as a kit complete with three genuine Spanish Weber 40DCOE
Carburettors as part number PDA301-40 priced at just £2,52 plus VAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

The legendary B18 and B20 Volvo engines have been powering classic Volvos for decades. One of the most popular conversions is to fit a Weber 32/36 on road going vehicles, or a 38/38 on fast road or race vehicles.

Crucial to this conversion is the intake manifold and Webcon is pleased to add this application to its growing range of superb quality, UK manufactured intake manifolds.

Supplied complete with all required fitting parts, part number MW0042 is priced at just £437 plus VAT and will allow installation of the Weber DGV, DGAS and DCD carburettors, as well as the new Webcon Retroject EFI throttle body.

MW0042 is also available with carburettor and air filter as below:

Part Number Carburettor Choke Operation Price
PVO101 Weber 32/36 DGV Manual £748 plus VAT
PVO103 Weber 32/36 DGAV Automatic Water operated £845 plus VAT
PVO108 Weber 32/36 DGEV Automatic Electric operated £775 plus VAT
PVO105 Weber 38 DGMS Manual £762 plus VAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Traditionally, connecting a vehicle throttle cable to a carburettor rod linkage system has involved a degree of fabrication as there has been nothing on the market to facilitate this. However, Webcon is pleased to announce that it is now able to introduce a solution to this problem.
Reference FK0005 is a superior quality, UK designed and manufactured billet aluminium Rod Linkage to Cable Converter System that will fit any 5/16 linkage rod and allow quick and easy connection to a throttle cable.
FK0005 is supplied with pin, yoke and split pin, and is priced at just £23 plus VAT.
Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Mini Spares has always had a policy of trying to keep the classic Mini alive by reintroducing
parts and products that are no longer available from the original sources.

The latest such product is a padded black vinyl top section for Mini dashboards.

This is the section that holds the ash tray and can become damaged over the years by
exposure to the sun or just plain wear and tear. The Mini Spares replacement can be ordered as part number JPC4594PMA at £351.00 inc. VAT.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Mini Spares is constantly introducing parts to replace Mini items where the originals are no longer available.
A recent introduction is a range of steel pre-formed brake pipes that faithfully reproduce the originals.
The brake pipes are ideal for the perfectionist who wants to restore a Mini to the factory
specification but doesn’t want the hassle of trying to bend new pipes to the original shapes.
Several pipes are already available from the Mini Spares website with more planned for
introduction soon.

Prices start from as little as £9.00 each plus VAT.
For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Rear seat passengers can now have the comfort and convenience of inertia reel seat belts
thanks to some new introductions from Mini Spares.
The company is offering its own brand of inertia reel rear seat belts for the late MPi model
classic Minis and these are available in a choice of black, beige, blue or red.
The seat belts can be ordered as follows:
Black MSSB1114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .£65.18 each inc. VAT
Beige MSSB1114BEIGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .£72.38 each inc. VAT
Blue MSSB1114BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .£65.18 each inc. VAT
Red MSSB1114RED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .£65.18 each inc. VAT
The seat belts can also be fitted to earlier cars if the MPI seat belt mounting points are fitted. (available separately).

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com