Eurotuningnews.com

Burton is pleased to announce that it is now producing its own Alloy Water Pump Pulleys for the SOHC Pinto engine.

The pulley is suitable for the following Pinto engined, single belt vehicles:,
• Ford Capri Mk1/Mk2/Mk3 1.6/2.0 1972-1987
• Ford Cortina Mk3/Mk4/Mk5 1.6/2.0 1970-1982
• Ford Escort Mk1 RS2000 2.0 1973-1974
• Ford Escort Mk2 RS2000 2.0 & Mexico 1.6 1975-1980
• TVR Tamsin 200 2.0

The pulley retails at £48.00 inc. VAT each and can be ordered as part number FT320.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Proper racing braided hose ends tend to be expensive and require special tools to install. However, these stainless and rubber hose ends are affordable and do the job admirably on almost all road cars.

Burton’s 8mm chrome end cap and clamp retails at just £6.00 each inc. VAT and provides secure fastening on all types of hoses, ; it is paticularly useful on stainless steel braided lines as it protects the sharp braided ends and prevents fraying. The internal stainless worm drive clip is replaceable and the cap can be rotated to hide the worm drive for a neater installation. It can be used on 5/16″ and 8mm O.D. hose. Order as part number SSH516CEC.

Burtons also offer an alternative rubber end cap and clamp (part number SSH516REC) at just £2.75 inc. VAT each, that performs the same function, but with an external hose clamp.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Alloy wheels are particularly susceptible to damage when off the vehicle – especially when being stored together on a rack. The faces can easily rub against each other causing rim damage.

Thankfully, B-G Racing can now supply a divider set for use with its Single Tier Wheel and Tyre Trolley to restrain the wheels and tyres thus preventing them from moving around and rubbing against each other.

Once fitted, the dividers are easily adjusted to suit the various wheel and tyre sizes.
The trolley and dividers are ideal for workshops, tyre-fitting bays, garages, alloy wheel refurbishment companies, race pits and wheel & accessory dealers. In fact anywhere where wheels are removed from a vehicle and damage to the rim face must be prevented.

The dividers are produced from a mild steel skeleton sleeved with protective foam tubing and are
sold as a set of three.

Price: £113.99 inc VAT.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit the website: www.bg-racing.co.uk

Not every mechanic in Europe owns a full set of AN (DASH) sized wrenches; trying to make do with steel metric sizes invariably leads to damaged AN fittings. AN lines are also frequently routed through hard-to-reach areas where a large spanner just can’t reach.

Aeroflow has solved both problems at once with the introduction of its Large Stubby Adjustable AN Wrench.

The Large Stubby Adjustable Wrench features a 4.5″ long ergonomic handle and fits sizes from
-03AN up to -20AN. It is perfect for highly confined space. The aluminium jaws are specifically designed for alloy end fitting and won’t round or damage them.
Price: £30.00 inc VAT.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com

No drag racer wants a parachute accidentally deploying in the pits or staging lanes or during transport.

The Aeroflow Parachute Safety Flag Locking Pin will ensure this cannot happen.

The flag features a brightly coloured Aeroflow logo on one side with the phrase ‘REMOVE BEFORE RACE’ written in bold on the other, so the crew won’t forget to remove the flag – and the essential pin – before launch.

Price: £9.59 inc VAT.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com

Webcon has offered a Weber manifold for the Rover V8 engine for some time, but with two carburettors positioned on each cylinder head this has proved a little too high for some applications.

Now, Webcon has revised the design and positioned the four Weber IDF carburettors in a line along the manifold between the heads, much like the early Aston Martin V8, creating an overall lower profile.

The manifold comes complete with linkage, cable and a stud kit. Order as part number MM4473 at £1699 plus vat.

A complete kit with four carburettors will be released later in 2019.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is delighted to announce the introduction of a range of anodised aluminium finish EFi regulators
to complement the blue and red versions already available.

The regulators are technically the same as the existing versions but are visually more appropriate for a ‘business like’ natural-metal engine-bay theme.

They are supplied complete with a mounting bracket and 8mm push-on unions.

Prices as follows

Pressure Part number Price
2.5 bar WFR225 £79.54 + vat
3.0 bar WFR230 £79.54 + vat
3.5 bar WFR235 £79.54 + vat
4.0 bar WFR240 £110.43 + vat
4.3 bar WFR243 £88.51 + vat
4.5 bar WFR245 £101.57 + vat
0-5 bar adjustable WFR205 £81.95 + vat

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

The German tuning house of Prior Design offers a complete wide body aerodynamic kit for the Mercedes CLK [W209] based on the results of racing and the experience gained in motorsports. The kit enables wider wheels and spacers to be used to improve stance, roadholding and handling.
The kit includes:
PD Black Edition front bumper
PD Black Edition rear bumper incl. diffuser
PD Black Edition side skirts
PD Black Edition front fender
PD Black Edition side panel widening rear
Mounting equipment
The rear bumper comes with integrated rear diffuser and pre-cut recesses ready for a 4-pipe / duplex exhaust system – which is also available from Prior Design.

The complete kit retails at £4995 including VAT and Prior Design UK can fit and paint the kit in the suggested Black Edition livery or to match the original body colour.
Fitting and painting at their UK fitting centre starts at £3000 incl. VAT.

This components are made from a quality GRP-Duraflex compound which is characterised by an excellent surface finish that provides sufficient flexibility combined with high stability and comes ready for painting. All parts are also available separately.

Optional extras:
PD Black Edition bonnet for Mercedes CLK [W209].
PD Black Edition Tailgate spoiler for Mercedes CLK [W209].

For further details visit the Prior-Design.co.uk website
or call 0208 5989115

M-Style has teamed up with Cobra Sport to offer a package of the latest Cobra Sport Quad Exhaust for BMW F32/F33/F36 435d and the MStyle diffuser which was developed especially for use with this exhaust system.

The package will fit the F32 (Coupe) and F36 (Gran Coupe). It can also be fitted to the M-Sport models but an additional dual exit panel will be required.
(NB: Not suitable for AdBlue editions and models with mounting point and strengthening bars).

This performance exhaust is made from 3″/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. The conversion allows owners to achieve the look of the more recognisable 440i’s dual exit exhaust on the more economical 435d diesel model.

The complete package of exhaust with quad T304 stainless steel tailpipes and an MStyle Performance Quad Exit Diffuser retails at £788.70 inc VAT. MStyle can also offer fitting at an additional £160 inc VAT.

For further details visit the M-Style website: www.mstyle.co.uk
or call 0208 5989115

The MOMO Mod.08 Steering Wheel – Blue Spoke – is now available in UK!

The MOMO Mod .08 Steering Wheel is designed for use in saloon and rally cars; the deep dish offers the driver maximum control and the yellow leather marker on the top provides a quick reference to the position of the steering.

The MOMO Mod .08 comes finished in either black suede or black leather. It features three blue aluminium spokes with a machined-out section and the MOMO Arrow logo on the horn button.

An aftermarket hub is required for installation.

All MOMO racing steering wheels are produced in Italy to the highest quality with anticorodal aluminium frames. The suede or leather covering is glued to the rim, instead of being stitched, to provide a seamless finish for greater comfort and durability.

Prices from: £221.99 inc. VAT

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.momo-uk.co.uk