Eurotuningnews.com

When Tickford was commissioned to convert the Ford Cosworth RS into the RS500 one of the changes it made was to lower and uprate the suspension. Thanks to Gaz Cosworth RS 4×4 (1989-93) owners can now also enjoy the benefits of uprated and lower suspension, with GAZ’s height and damper rate adjustable conversion.

This GAZ GHA kit is suitable for both road and occasional track day use and includes springs and front and rear coilovers. The damper settings can be adjusted whilst on the vehicle by means of easily accessible knobs to provide the optimum settings for conditions, use and driver preference.

Ride height is adjustable all round by means of adjustable spring seats on the front struts and rear dampers. Each damper unit is bright plated to resist corrosion.

The GAZ GHA kit for the Ford Sierra Cosworth RS (1989-93) can be ordered as part number GHA322 and retails at just £626.87 plus VAT.

All units are individually tested and provided with a test print out before leaving the factory and
come with the peace of mind of a two year manufacturer’s warranty.

For further details visit the GAZ website: www.gazshocks.com

Fidanza, Americaʼs leading performance flywheel specialists, has a direct replacement lightweight aluminium flywheel to improve the performance of the ever-popular Peugeot 106 and Citroen Saxo.

The Fidanza aluminium flywheel replaces the heavy standard flywheel and improves the power-to-weight ratio making the engine more responsive and improving performance and acceleration.

The Fidanza aluminium flywheel is made from high-quality machined 6061 T6 aluminium with a 1050 steel friction surface, CNC machined fastener holes and chamfers. The friction surface of the flywheel is a replaceable steel plate, so when the surface eventually becomes worn it can be replaced without requiring a new flywheel.

Fidanza flywheels are suitable for use with just about any clutch disc material available – from organic to Kevlar and even sintered iron. The flywheels are incredibly durable and come with a heat-treated ring gear and military grade fasteners. Fidanza flywheels are equally suited for fast road, trackday and pure competition use.

Flywheel for Peugeot 106/ 1600GTi/Rallye 1997-2000 and Citroen Saxo 1993-2000 – order as part number 111061 at US$546.12 plus tax and shipping.

READER’S DISCOUNT WHEN ORDERING DIRECTLY ONLINE: It is now possible to buy directly from Fidanza online and readers can obtain a 20% discount if they enter the promo code of “Fidanza” when ordering directly from Fidanza online – GIVING  READERS A DISCOUNT OF  $109.22 ON THIS ITEM!!!.

For more information on Fidanza’s premium aluminium flywheels and other great products, call +1 440 259 5656 or visit www.fidanza.com

Because colder air is denser than warm air, and contains a greater number of oxygen molecules, it will produce a better burn in an engine resulting in increased horsepower.

DEI now offers a new way to keep an engine’s air intake charge as cold as possible for maximum effect. DEI’s Cool Cover™ GOLD Air Tube Cover efficiently reflects direct heat thus keeping the air charge in the intake pipe cooler thereby improving air density and increasing power.

DEI’s Cool Cover™ GOLD Air Tube Cover has been manufactured from high temperature metalized polyimide laminates bonded to a robust heat treated glass fibre base material. The Cool Cover GOLD air tube cover is able to reflect direct heat up to 800°F (427°C) to keep the air intake as cool as possible.

The universal fit, low profile cover is designed to fit over the air intake tube with a simple to install hook and loop closure making installation and removal possible in mere seconds.

It is easy to trim to length and, with a profile that is only 0.031” (0.7874mm) thick, the cover takes up negligible space around the intake tube. It will fit intake tubes up to 28 inches (71.12cms) in length and 4 inches (10.16cms) in diameter.

Customers can order directly from DEI in the USA or contact DEI to find your nearest stockist.
Retail price: $83.55 plus tax and shipping. Order as part number: 010486

In addition to Cool Cover GOLD, DEI offers a full line of GOLD heat protection products including Heat Sheath GOLD, Heat Shroud GOLD and Heat Screen GOLD.

To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.

Burton Power can now offer a direct replacement for the original Cortina Mk1 and Mk2 interior mirror. Unlike the plastic original the Burton version is manufactured from stainless steel.

This mirror is also suitable as a universal fitting mirror for various applications including other classics (particularly open sports cars, as it is stainless steel) and kit cars.

It can be fitted as intended, hanging down from the screen frame, but can also be fitted to the top of the dashboard standing upright.

Specification: 2 screw fitting with 42mm hole centres.
Mirror dimensions: 155mm x 63mm. Overall height 90mm

Available as part number MIRRORC12RV. Retail price: £19.40 incl. VAT.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Now you can save time and energy when replacing a flat or punctured tyre on a twin axle trailer with the B-G Racing Tyre Changing Ramp.

The Tyre Changing Ramp simplifies the wheel changing process. Simply loosen the wheel nuts/bolts on the damaged wheel and drive the good wheel onto the Tyre Changing Ramp. The damaged wheel is then suspended off the ground allowing for work to be carried out safely and efficiently, before driving the trailer back off the ramp and re-tightening the nuts/bolts.

No more messing around with jacks or makeshift shims; no problems with a jack sinking into the earth when parked on grass (a ribbed base keeps it in place whilst the trailer is driven onto it). Throw one of these B-G Racing Tyre Changing Ramps in the back of the trailer and you’ll be set to tackle a puncture with ease.

Ideal for any twin axle trailer – car trailer, boat trailer, pony trailer etc. etc.
Sold individually. Price: £35.99 inc. VAT.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk

Many paddocks and pit areas may look perfectly level to the naked eye but when trying to level off scale platforms you realise just how uneven they are, which leaves you desperately searching for some makeshift shims.

The B-G Racing Levelling Foot Extension Kit has been designed to solve this issue. Offering 35mm of lift per foot, they can be used individually or joined together for increased lift.

Sold in a set of 4.
Price: £38.39 inc VAT.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk

Aeroflow continues to add to its extensive range of AN fittings with some new Hex Flared Plugs and Caps for capping off fluid line connections when not required.

The components are produced from aluminium with a choice of blue, black or silver anodised finishes.

Available in sizes -03 up to -20 with retail prices from: £3.59 inc VAT each.

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com

Webcon is delighted to announce the introduction of a Weber 32/36 DGEV kit to suit the Porsche 914/4 and VW Transporter fitted with 1.7/1.8 and 2.0 air cooled engines.

Kit part number PPO101 comes complete with all required parts and features a genuine Spanish Weber progressive 32/36 DGEV electric choke carburettor, manifold set, linkage and air filter assembly as well as full fitting instructions.

PPO101 is available from stock priced at £375 plus vat.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is pleased to announce the introduction of two new Weber carburettor kits to suit the popular Mercruiser range of 4 and 6 cylinder Marine engines. The kits add to the existing range of Weber kits for the Volvo Penta range of OHV and OHC engines and offer boat owners the ability to install superbly reliable and responsive Weber twin choke carburettors.

Both kits feature all adaptors, gaskets, nuts, bolts washers etc required for the conversion, as well as an air filter and a genuine Spanish Weber 38 DGES sequential electric choke carburettor.

The new Mercruiser kits are available as follows
PMR101 Mercruiser 4 cyl 3.0 £485 plus vat
PMR102 Mercruiser 6 cyl 4.3 £499 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is delighted to announce the introduction of the legendary Filter King fuel filter and regulator assembly to its range of products.

The Filter King fuel filter features: a a glass bowl to easily assess the condition of the replaceable filter, 2 x push on 5/16 – 8mm fuel unions, a universal mounting bracket, and a captive thread to allow fitment of a fuel pressure gauge (the use of Webcon WFR150 0-15psi fuel pressure gauge is recommended).

The Filter King is a genuine Malpassi product, and works in the 1.5 – 7psi range so is suitable for all Weber carburettor installations. Ordered as part number WFR103

WFR103 is £59.95 plus vat
WFR150 is £16.75 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk