Eurotuningnews.com

Webcon is delighted to announce the re-introduction of its range of manifold spacer sets.

It is widely understood that increasing intake length can have a beneficial effect on performance. Up until now, the only way to achieve this has been to fit different length intake manifolds when available. However, the new Webcon spacers allow the existing intake manifold to quickly and easily be extended with the minimum of disruption to the tuning process.

Superbly CNC manufactured in the UK from billet aluminium, the new spacers add 32mm to the length of any 45DCOE manifold and are supplied in kit form with studs, nuts, O rings, gaskets, mounting cups and grommets.

The Webcon spacer kits are available to suit single, twin and triple Weber 45DCOE fitments as below, but are also suitable for use with 45DCOE flange throttle bodies.
MSK001 Single DCOE £96.31 plus VAT
MSK0014 Twin DCOE £189.54 plus VAT
MSK0016 Triple DCOE £282.63 plus VAT

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Bad hot starting can be the result of a build-up of pressure in the fuel feed line of a carburettor equipped car; this causes the carburettor to flood either during hot soak or whilst cranking.

Some manufacturers addressed this problem by fitting a fuel return line to the tank; however, this is a cumbersome solution for owners of cars without this feature as it involves making irreversible modifications to the car. Fortunately, Webcon has the answer.

Webcon’s Fuel Line Pressure Relief Kit provides extra fuel hose, clips and two tee pieces (one with a valve and one without) to provide a by-pass loop in the feed pipe in order to bleed excess pressure build up from the system.

Installation involves simply cutting the fuel feed pipe before and after the fuel pump then inserting the by-pass hose via the tee pieces. Solving a hot starting problem really is as simple as that. The kit contains a length of fuel hose, six hose clamps and two tee pieces. The kit is available with 8mm i.d. hose (Part HSK001) or 6mm I.D. hose (Part HSK002). Both retail at £25.62 plus VAT each.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is delighted to announce the re-introduction of the Weber replacement kit to suit the classic Mercedes 220.

The kit has been tailored for four cylinder models produced between 1968 and 1973. It replaces the often troublesome Zenith Stromberg 175CD with a genuine Weber 32/36 DGAV to give a more responsive and fuel efficient drive whilst retaining the original factory air box.

The Webcon Weber 32/36 DGAV replacement kit for the classic Mercedes 220 can be ordered as part number PME101 at a retail price of £904.40 plus VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Incredibly, it’s the 65th anniversary of the original Mini being launched and Mini Spares has a range of merchandise to commemorate the event.

The collection consists of:
65th Anniversary T Shirt. Order as T-SHIRT LARGE, T-SHIRT MEDIUM, T-SHIRT SMALL, T-SHIRT EXTRA LARGE, T-SHIRT XXL at £20 inc. VAT each.

65th Anniversary 1/4 Zip Sweatshirt. Order as SWEATSHIRT02LGE, SWEATSHIRT02MED, SWEATSHIRT02SMA, SWEATSHIRT02XLG at £45 inc. VAT each.

65th Anniversary Padded Jacket. Order as JACKET06-LARGE, JACKET06-MEDIUM, JACKET06-SMALL, JACKET06-XLARGE at £64.99 inc. VAT each.

65th Anniversary Baseball Cap. Order as CAP03 at £18.00 inc. VAT.

And because it’s Britain and it’s summer time, there’s a Mini Spares Golf Umbrella.
Order as UMBRELLA at £30.60 inc. VAT.

Obviously these items won’t be available for long, so order yours right away while stocks last.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Burton Power is now offering these adjustable in-situ track control arms for competition use on Ford Escort Mk1 & Mk2 models and the Capri Mk1, 2 and 3.

The original inner bush in the track control arm is replaced with spherical joints, thus providing precise camber adjustment. This can be achieved without removal from the car making them quick and easy for adjusting in the pits to suit the particular track layout and conditions.

The track control arms are supplied as a paired kit complete with more substantial 1/2” bolts and side spacers. The larger bolts will require the crossmember mounting hole to be drilled out to 1/2″ diameter.

Order as part number TCA1R at £168.00 (inc VAT).

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

In keeping with its policy of producing parts that are no longer available from the original source Burton is now offering a Crankshaft Oil Seal Front Cover that fits both the Pinto and Cosworth YB engines.

The cover faithfully reproduces the original part and can be ordered as part number FT1065 at £49.96 (inc VAT).

FT1065 is suitable for Cosworth YB 16v Turbo engines, Pinto equipped versions of Capri, Cortina, Escort, Granada, Sierra, Transit and the TVR Tamsin 200 2.0 as well as Pinto equipped kit cars.

for further details contact Burton Power on 0208 554 2281
www.burtonpower.com

Webcon is delighted to introduce a new direct replacement Weber carburettor kit to suit the Ford Consul Mk2 and Zephyr Mk3 models, replacing the original Zenith 36VN.

Produced in conjunction with a leading Consul/Zephyr expert, kit part number 1529003900 is supplied fully jetted to suit the 1703cc engine and provides a healthy increase in driveability, along with improved fuel economy.

Supplied with all parts required to complete the conversion, 1529003900 is priced at just £289.50 plus VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

The latest additions to the Webcon carburettor tool range are the float height gauges to suit the Weber 40 and 46 IDA3C models and the Weber 48IDA.

These new tool sets are precision made in the UK, and are a close reproduction of the original Weber tools that went out of production over thirty years ago.
Both kits are supplied with easy to follow instructions, and will be an essential toolbox addition
for professional as well as DIY carburettor tuners.

Details of the new float set gauges are:
Part Number Suits Price
9801410000 Weber 48IDA £38.95 plus VAT
9801630000 Weber 40/46IDA3C £38.95 plus VAT

The comprehensive range of Weber tools available from Webcon includes:
Choke Extractor Auxiliary Venturi Extractor
Box Spanner Float Height Tools
Jet Drills Jet Gauges
Synchrometer Vacuum Adaptors

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Webcon is pleased to introduce a single choke to twin choke carburettor conversion kit featuring the water auto choke Weber 38DGAS.

This kit has been designed to replace the large (up to 42mm throttle plate) single choke carburettor which was commonly used on 6 and 8 cylinder engines from the 1940s to the 1970s.

The kit is supplied with a genuine Weber 38DGAS carburettor, a single choke to twin choke adaptor kit, air filter and a universal throttle wheel set.

The baseplate stud pattern is available to download from www.webcon.co.uk so that suitability can be assessed prior to purchase.
Order from stock as part number 1790035200 at £531.73 plus VAT. Alternative versions are also available with manual and electric chokes, as well as a full range of kits featuring Weber 32/36 progressive carburettors to suit smaller engines.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

M-Style has just released pictures of its latest project car, a BMW E30 demonstrating M-Style’s ‘M-Tech 2 look’ body kit.

The body panels are made from tough polyurethane and kits are available for both the 2 & 4 door models.

The kit consists of a two piece front bumper (as per the original BMW M Tech 2), side skirts, door mouldings, rear bumper and an optional M Tech 2 style boot spoiler. The complete kit, including the rear spoiler, retails at £1,368 inc. VAT.

Alternatively, a kit is available with a one piece bumper for £999 and the boot spoiler is available separately for £219. Prices include VAT.

M-Style can also provide fitting and painting at its Romford workshop if required.
­For further details e-mail info@mstyle.co.uk or call 0208 598 9115