The latest addition to the Webcon range of parts for American carburettors is the Edelbrock Master Repair Kit (Part No. 1477) which is suitable for all Edelbrock Performer and Thunder series of Square Bore carburettors.
The kit contains all the parts required to overhaul these popular units and comes complete with comprehensive installation and set up instructions.
Edelbrock 1477 is available from stock priced at £77.12 plus VAT.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
Alexander Moulton’s rubber cone and trumpet suspension system was quite revolutionary when it appeared on the original Minis. (Although Moulton had designed a rubber cone and hydraulic system during his time at Alvis). The problem with revolutionary inventions is that once they cease production they rapidly become hard to replace.
Thankfully Mini Spares, true to its tradition of producing hard-to-find Mini parts, has produced its own version of the Rear Suspension Trumpet to fit the wider 3.7” cone spring base (earlier versions were 3.2”) and it is available in two lengths.
The 12.28” long version is available as part number 21A1684 and replicates the part Rover fitted to Minis with 12” wheels from 1984 and the Mini Van/Estate and Pickup models.
The longer 12.4” version is available as part number 21A1684S and is intended for the MPi Mini with 13” wheels, although it will also fit Moke and the Cooper S to September 1964 which had 12.48” trumpets as standard.
The trumpet length dictates the rear ride height so if your Mini has been lowered by cutting the trumpet these Mini Spares versions will enable the original height to be restored. Both versions retail at £57.60 each inc. VAT.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Catalytic converters were fitted to classic Minis from 1990 on and UK owners need to ensure their ‘cats’ are in good working order when the annual MOT test comes around. Even if your Mini is exempt from compulsory testing it’s still good practice to have it tested to check for any faults you may have missed and to ensure that it is environmentally friendly in the light of climate change.
In other territories, notably parts of the EU, testing may be even more stringent than in the UK.
Thankfully, Mini Spares produces replacement catalytic converters to satisfy most regulations.
The RV8009 will fit all ‘cat’ equipped Minis and as it is made to original specifications it meets UK MOT requirements. It retails at just £54.40 inc. VAT.
For cars which need to conform to EU regulations there is RV8009E at £76.80 inc. VAT (currently 87.55€) which is outwardly identical to RV8009 but has been TüV approved for use in the EU.
For those looking for a little more performance, there is the RC40-015 Millennium Range Sports Type Catalytic Converter with a 200 cell core. This will also fit all ‘cat’ equipped Minis and retails at £216.00 inc. VAT.
Mini Spares also stocks all of the required studs and nuts needed to fit these ‘cats’.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
M-Style is proud to offer the newly developed Gen.3 E-Charger G1 based supercharger system for the BMW N52 engine family.
This supercharger system is designed to increase the power output by 80-100 horsepower. As well as giving smooth day-to-day motoring it instantly provides phenomenal acceleration on demand.
The system maintains all OBD-II diagnostic functions and the supercharger and other parts in the kit are backed by a comprehensive two year, unlimited mileage warranty.
The system comes with an ESS E-Flash OBD2 cable. This allows the end user to upload the supercharger ECU software directly to the car from any PC running Windows 7 or newer. The system also includes full diagnostic and code clearing capability. Any future ESS software updates can be received by email and loaded directly to the car. The original ECU software will be saved and can easily be restored in the future.
The kit includes: a quiet, self-lubricating E-Charger G1 supercharger running 6-6.5PSI boost; larger Bosch fuel injectors; a custom molded silicone discharge system; a custom molded plastic intake assembly with direct connection for PCV, ICV and MAF sensor; billet CNC main SC bracket anodised with a black finish; CNC precision pulleys and beltdrive system and a genuine K&N air filter.
The kit is available for at £7975 incl. VAT. M-Style can provide a fitting service, if required, at £750 inc. VAT. No irreversible modifications to the car will be necessary.
For further details e-mail info@mstyle.co.uk or call 0208 598 9115
M-Style is pleased to announce that it is now offering a superior quality performance style carbon fibre kit for the BMW M2 and M2 Competition.
The kit includes the front splitter, side skirts, diffuser and rear spoiler, all made from strong, lightweight carbon fibre which has been further reinforced with a glass fibre composite (CFRP) for strength, quality and durability. This is the same type of carbon composite that is used on the roof of the M3 / M4.
The kit parts are finished with a high gloss lacquer, which is then hand and machine polished to give additional depth and protection.
The kit is available at £1109.00 including VAT.
The kit comes with fitting components but M-Style recommends professional fitting. M-Style usually charges £200 but for a limited introductory period is offering fitting at just £100 including VAT.
For further details e-mail info@mstyle.co.uk or call 0208 598 9115
Gaz now offers double adjustable gas race suspension kits for the Porsche 944 and 968. The coilover dampers are both height and damper rate adjustable. Ride height is altered by means of adjustable spring seats. The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are black zinc plated to ensure that they remain in good order even after considerable service.
The front struts also have elongated holes to allow for camber adjustment.
Damper bounce and rebound rates are independently controlled. The bump setting is adjusted on the remote canister and the rebound setting is adjusted on the strut body. The GAZ coilovers come with gas cells in the remote reservoirs filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions.
All the units are individually tested before leaving the factory.
The GAZ double adjustable gas kit for Porsche 944 and 968 can be ordered as part number GGA038DA at £1869.84+ carriage & VAT For further details visit the GAZ website: www.gazshocks.com
GAZ can now offer a Rally Specification coilover suspension kit for the Peugeot 206.
The coilover struts are both height and damper rate adjustable. Front ride height is altered by means of adjustable spring seats. The height adjusters have a coarse acme form thread for ease of adjustment; the struts are black zinc plated and the rears are bright zinc plated to ensure that they remain in good order even after considerable service.
Damper bounce and rebound rates are adjusted by means of easily accessible adjuster knobs on the damper body. The GAZ struts come with integral gas cells filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions. For extra peace of mind all the units are individually tested and certified before leaving the factory.
GAZ Rally Spec GAZ Gold kit for Peugeot 206 1998-2001 can be ordered as part number GGA418 at £938.71 + carriage & VAT.
For further details visit the GAZ website: www.gazshocks.com
The Mercedes W126 was the second generation of the company’s S-Class models with the saloon made from 1979 to 1991 and the Coupe made from 1981 to 1990. Today it serves as a comfortable and reliable classic cruiser but things have moved on in terms of suspension and handling. It’s just as well then that GAZ can provide improved handling with adjustable dampers.
GAZ fully adjustable GT dampers enable the damping bump and rebound rate to be adjusted to suit the conditions and driving style. They have adjustable damping rates which can be altered by means of an easily accessible knob on the side of the units.
GAZ can set the dampers up for general road use but they will also be suitable for the occasional track slalom and sprint use; alternatively, they can even be set up for serious racing use if you so wish.
GAZ dampers feature a zinc plated body and protective plastic sleeve to keep them looking good and working well for long into the future.
All units are individually tested before leaving the factory and are covered by a two year warranty.
GAZ GT dampers for the Mercedes W126 retail at: Front GT7-5330 £67.30 each plus VAT Rear GT9-5331 £82.69 each plus VAT and can be ordered from GAZ dealers worldwide.
For further details visit the GAZ website: www.gazshocks.com
If ever there was a company that knows a thing or two about tuning BMW suspension then that honour must fall to GAZ. GAZ has been supplying, sponsoring and winning BMW race series for many years now.
The Gaz Gold suspension kit for the BMW E30 has been around for a while, but now there are some new features and options. The dampers and struts are now coated in a super-tough Black Zinc finish which will ensure that the dampers will remain in good order for many years despite all that the track and road can throw at them, and serious race/trackday users have the option to add racing solid top mounts.
Ride height is altered by means of adjustable spring seats and the height adjusters have a coarse acme form thread for ease of adjustment even when caked in dry mud.
Damper bounce and rebound rates are adjusted by means of easily accessible adjuster knobs on the damper body. The GAZ coilovers come with integral gas cells filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions and, for extra peace of mind, all the units are individually tested and certified before leaving the factory.
The GAZ GOLD kit for BMW E30 1982-91 (incl. M3 model) can be ordered as part number GGA300 at £1013.58 + carriage & VAT. As shown, solid race top mounts optional extra at £121.28 per pair + carriage & VAT. For further details visit the GAZ website: www.gazshocks.com
We don’t often hear about performance parts for BMW M6 models, but now Fidanza has a short shift conversion which includes variable height adjustment for the E63/E64 2005-2008 BMW M6.
Fidanza Performance shifters are designed as a ‘plug-‘n’-play’ direct factory replacement and reduce throw by up to 40% for faster shifts.
Fidanza short shift kits are precisely made with 6061 billet aluminium and a hardened steel lever shaft.
The Fidanza short throw shifter 891103 suitable for 2005-2008 BMW M6s and has been based on the OEM shifter design, but with a reduced angle in the shifter shaft. The result will change your driving experience by providing a shorter throw and an even sportier shifter action. This conversion is also height adjustable which allows the driver to adjust the shifter height to suit their own preference.
Fidanza Short Shifter 891103 is available from Fidanza.com at $277.74 plus import tax and shipping.
For more information on Fidanza’s great products visit www.fidanza.com or contact sales@fidanza.com
