Eurotuningnews.com

Powerflex has just released a new bush insert for the Porsche 997 Gen 1.

PFR57-532 GEARBOX MOUNTING BUSH INSERT fits manual gearboxes with a single bush in the end casing (excluding Turbo, GT2 & GT3 models, which use PFR57-531). Retail price: £35.94 inc. VAT.

The OE rubber mounts are designed with voiding and have comfort in mind; however, this makes them prone to softening and tearing with age. This causes excessive gearbox and engine movement, resulting in imprecise gear shifting as well as adversely impacting on the handling of the vehicle.

By filling the voids in the OE bush, the feel, handling, power delivery and the positivity of gear changes are noticeably improved.

For vehicles used in Motorsports or predominately on track, these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex Purple 80 Shore A performance material.

All Powerflex bushes, of course, carry a Lifetime Warranty.

For more details visit www.powerflex.co.uk or call 01895 460033.

Powerflex has just added some new parts to its listings for Peugeot and Citroen, notably the 306, Partner/Ranch, Citroën Berlingo, Xsara and ZX.

PFF50-303-17, 18, 19, 21 & 22 FRONT ANTI ROLL BAR BUSH comes in the four sizes for the range of anti-roll bars supplied by Peugeot and Citroën. All sizes retail at £47.88 per pair inc. VAT.

The Powerflex polyurethane mounting bushes are resilient to wear, come with a grease retention feature in the bore and improve the location of the bar. The bushes will reduce body roll and are the ideal replacement for worn and knocking rubber bushes.

When fitting these anti roll bar bushes it is an ideal time to also fit a PFF50-302 FRONT ARM REAR ANTI-LIFT CASTER BUSH as the anti roll bar bush bracket has to be removed to fit the front arm rear bush.

All Powerflex bushes, of course, carry a Lifetime Warranty.

For more details visit www.powerflex.co.uk or call 01895 460033.

Powerflex has just added a new part to its range of bushes for the Lotus Elise S1 & S2, Exige S1 & MG TF.

With the original Lotus and Rover mount being obsolete Powerflex has been asked to produce a replacement for the aging rubber bush and thereby complete its range of mounts for these vehicles.

PFR34-232 Lower Engine Mount Bush fits lower engine mount brackets found on vehicles with a K series engine. £ 29.94 inc. VAT.

For vehicles used in Motorsports or predominately on track, these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex Purple 80 Shore A performance material.

All Powerflex bushes, of course, carry a Lifetime Warranty.

For more details visit www.powerflex.co.uk or call 01895 460033.

Powerflex has just released two new parts to fit the Ford Fiesta MK7 including the ST.

With these cars running increased power for fast road and track use there is an increased demand for additional engine stability; this will improve acceleration response by reducing both torque reaction and exhaust and wiring stress caused through excessive movement of the engine.

PFF19-2025 Front Upper Engine Mount Insert is an insert to fit into the original mount to limit movement of the engine to provide stability under acceleration. £ 23.34 inc. VAT.

PFF19-2026 Transmission Mount Insert provides further engine and transmission stability to improve shift feel and performance. £ 34.74 inc. VAT.

Both of our new parts are easily fitted into the large voiding in existing mounts to make an immediate improvement to engine stability under acceleration and is completely reversible.

For vehicles used in Motorsports or predominately on track, these parts are also available in the Powerflex Black Series range which is manufactured using a 95 Shore A compound that boasts 25% increased stiffness over the Powerflex Purple 80 Shore A performance material.

All Powerflex bushes, of course, carry a Lifetime Warranty.

For more details visit www.powerflex.co.uk or call 01895 460033.

Mini Spares is renowned for producing quality parts for the classic Mini and its latest product is no exception. The Mini Spares die cast alloy rocker cover features the Mini Spares emblem as a testament to its quality. This polished aluminium rocker cover will enhance almost any Mini’s engine bay (except Mini’s with highlift rockers, due to the rocker cover’s extra thickness) and is also suitable for other ‘A’ Series engines.

This finned aluminium valve cover utilises the classic flat-top “Westlake” design and has the additional benefits of cooling the engine oil as it splashes the inside as well as dampening engine noise.

The Mini Spares Polished Aluminium Rocker Cover can be ordered as part number FP25 and retails at £38.99 inc vat

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Mini Spares is now offering its own 4.5″ x 10″ LM25 alloy wheel based on the 1960’s original Minilite.

The wheel is a perfect reproduction of the original 4.5″ wide Works Leyland Special Tuning Minilite but with cleaner cut looks thanks to modern day tooling.

This is the only 1960’s style Minilite wheel that will fit under the Mini’s wheel well without the need for arches, as required in Appendix K racers.

This unique wheel has the thick outer rim which was adopted by Special Tuning at Abingdon and also uses the tapered washers and stainless steel bolts of the original specification for better wheel centralisation. This unfortunately raises the cost but maintains originality and precision.

The Mini Spares wheel is suitable for serious competition cars as well as classics. It has the correct ET32 offset and can be ordered as part number C-21A1968 at £67.61 inc vat each.

 

 

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

Get the best of both worlds – acceleration and easy motorway cruising – with a Mini Spares five speed gearbox. All gearboxes come fully assembled and ready to install.

Both helical and straight cut gears are available and the gearboxes can be specified with either the original open differential, Mini Spares cross pin or limited slip differential.

The gearbox is suitable for 1275-1380cc engines (except those with extra boosted turbos). The gear case has undergone extensive modification and upgrading by Mini Spares with 58 improvements to the linkage and gear components.

The gearbox features a closer ratio gear set than the standard 4 speed gearbox by virtue of a redesigned laygear and first motion shaft which produce the following ratios-
1st gear 3.282
2nd gear 1.966
3rd gear 1.283
4th gear 1-1
5th gear is technically an overdrive gear and produces a reduction of .882 on the helical teeth gearbox, effectively giving a final drive ratio of 3.037 in 5th.

The Mini Spares 5 speed gearbox can be ordered as part number MSG05 (with helical gears and cross pin diff) at £2,295.00 inc vat. Please call for prices of other options. The gearbox is sold on an exchange basis with a surcharge of £250 pending the return of the old A Plus gearbox in a recyclable condition.

 

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

M-Style is pleased to announce that it has recently been appointed as a UK distributor for Mini and BMW applications of Swedish Ohlins suspension products. As such M-Style can now supply Ohlins Road and & Track shock absorbers and suspension kits for the following models:
M2 F87 2016-2017
M3 F80 2014-2017
M4 F82 2014-2017
3-series F30 2012-2017
1M E82 2011-2013
Z4 E89 2009-2016
M3 E92 2007-2012
3-series E90/E92 2005-2012
3-series E46 2001-2006
M3 E46 2001-2005
Mini Cooper 2006-2013
Mini Cooper S 2000-2006

Each kit is specifically design for each individual application.

A choice of road/track or road specific settings – which deliver explicit bump absorption – can be supplied to suit the customer’s requirements.

For prices and details visit www.mstyle.co.uk

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

M-Style, the official UK distributor of 3D Design products now has stocks of the latest carbon fibre rear diffuser for all BMW F87 M2 models.

The diffuser is made from genuine, high quality, light weight carbon fibre and comes ready to install at £1,689.00 inc. VAT.

A fitting service can also be provided, if required, at M-Style’s Romford Fitting Centre at £49.99 inc. VAT.

 

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115

M-Style is now offering an aerodynamic boot spoiler for the BMW F13 6 Series Coupe.

The spoiler has been designed to fit around the boot mounted high level stop light to alowing it to remain in use with the spoiler fitted.

The spoiler is supplied ready to paint in body colour or a contrasting colour and retails at £168.00 including VAT

Painting and fitting services can also be provided, if required, at M-Style’s Romford Fitting Centre.
Painting: £70.00 inc. VAT
Painting and fitting: £120.00 inc. VAT

 

For further details visit the M-Style website:
www.mstyle.co.uk or call 0208 5989115