Eurotuningnews.com

Webcon is delighted to announce the release of its long awaited manifold and linkage set
to allow fitment of three Weber 40DCOE carburettors to the Triumph GT6 engine.

The new kit features stepped manifolds to clear the sloping bonnet on the GT6. The new Webcon manifolds are designed, cast and manufactured in the UK to Webcon’s exacting quality standards and the set also includes a Webcon Marine-grade stainless rod linkage system to ensure a smooth, accurate set up and operational longevity.

The inlet manifold set and linkage can be ordered as part number MW0091 at £446.25 plus VAT.

Alternatively, the manifold set and linkage can also be ordered as a complete set with three genuine Spanish Weber 40DCOE carburettors as part number PTR304 priced at £1884.75 plus VAT.

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

The latest addition to Webcon’s extensive catalogue of EFI fuel pressure regulators is the twin feed range.

Webcon’s twin feed regulators have been designed for installations where the regulator is fitted either before, or in the middle of the fuel rail.

The new range is supplied with twin 8mm side feeds and a single 8mm base return, and is available in a number of pressure settings as shown below:

WFR205T £91.82 plus VAT 0-5 bar adjustable
WFR235T £87.26 plus VAT 3.5 bar fixed
WFR240T £120.23 plus VAT 4.0 bar fixed
WFR245T £109.88 plus VAT 4.5 bar fixed

Available directly from Webcon and from appointed Webcon dealers around the world.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Historically, there were various types of fresh air vents for early and late Minis and the vents were handed for left and right.

Mini Spares has now announced its own replacement ‘eyeball’ vent that is compatible with both the early bayonet type fittings as well as the later version with a slot. Thanks to the multi hole pattern around the rim of the Mini Spares vent it will also fit both sides of the dashboard.

The MiniSpares vents and seals are also ideal for use in kit cars , street rods and for adding face level ventilation to other classics (additional parts will be required). The Mini Spares vent can be ordered as part number 37H7035MS at £14.40 each inc. VAT and the foam seal is available as part number ALA6292 at just 64p each inc. VAT.

Note: The ‘MS’ suffix at the end of a part number denotes a genuine Mini Spares product that has been designed and manufacturered to at least the quality of the original part it replaces although, in many cases, the original quality is exceeded.

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

We’ve all see sequential front and rear indicators. Now, thanks to M-Style, owners of BMW F2x and F3x models can have sequential indicator repeaters in their mirrors too!

The simple Plug and Play kit is available at just £34.95 inc. VAT.

Fitting is quite straightforward, but M-Style can carry out the fitting for you for a small charge.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

M-Style now has stocks of M-Performance Carbon Steering Wheels and inserts which will fit all BMW F-Chassis M models.

The wheel features a genuine carbon fibre rim with Alcantara trim on the grip areas and the iconic M-Performance logo at the end of the bottom spoke.

The price of the wheel is £499.00 inc. VAT and the insert is £189.00 inc. VAT.

Professional fitting is recommended due to the transfer of the air bag system. M-Style can provide a fitting service for just £80.00 inc. VAT.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115

The Mk4 Golf and it’s other VAG siblings continue to enjoy immense popularity. This is no wonder as they are great handling cars but there is still room for improvement which can be achieved by fitting adjustable dampers from GAZ Suspension.

GAZ GT Dampers have adjustable damping rates which can be altered by means of an easily accessible knob on the side of the units.

GAZ can set the dampers up for general road use but they will also be suitable for occasional track slalom and sprint use and can even be set up for serious racing use if you so wish.

GAZ dampers feature a zinc plated body to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ GT dampers for these late Nineties VAG models are available from £70.65 plus VAT each.

For further details visit the GAZ website:
www.gazshocks.com

For further details visit the GAZ website: www.gazshocks.com

The MG ZR can make quite an exciting track day car and, with that in mind, GAZ is producing Gold Coilover Suspension for this model.

The system may also be useful for kit cars based on the ZR that are becoming popular. However,it would be wise to check with the particular kit manufacturers for suitability.

The Gaz Gold units are both height and damper rate adjustable. Ride height is adjustable through 80mm of adjustment.

The height adjusters have a coarse acme form thread for ease of adjustment and the damper units are black zinc plated to ensure that they remain in good order even after considerable service.

Damper rates are variable by means of an adjuster knob on the damper body. The GAZ Gold range comes with a gas cell in the reservoir filled with a high viscosity index multi grade oil to prevent cavitation and reduce fade under racing or trackday conditions.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ Gold Race Coilover Kits for MG ZR retail at £1,064.26 + VAT per kit.

GAZ can also produce this kit with ‘road use’ valving if required.

For further details visit the GAZ website: www.gazshocks.com

The Sunbeam Alpine is a great looking and affordable classic British sports car that makes an attractive alternative to an MG or Triumph. However, like most cars that date from the Sixties some improvement can be made to the ride and handling.

GAZ now has some special adjustable dampers for the Alpine to uprate the suspension.

GAZ GT Dampers have adjustable damping rates which can be altered by means of an easily accessible knob on the side of the units.

GAZ can set the dampers up for general road use but they will also be suitable for occasional track slalom and sprint use and can even be set up for serious racing use if you so wish.

GAZ dampers feature a zinc plated body and a durable black plastic sleeve to keep them looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a two year warranty.

The GAZ GT dampers for Sunbeam Alpine will also fit the V8 Tiger. Order as part number GT7-4530 (Front) and GT7-4531 (Rear) at £70.65 each plus VAT.

For further details visit the GAZ website: www.gazshocks.com

Now we know that racing a Citroen 2CV may not be everyone’s idea of motorsport, but there are quite a few Deux Chevaux racers out there and if you ever feel the need to get into this quirky sport at least you’ll know where to get race dampers…

GAZ offers race dampers for the 2CV in its GT Adjustable Damper range. The damper rate can be adjusted by means of an easily accessible adjuster knob on the side which enables the owner to ‘trim’ the suspension system to suit the track and driving style.

GAZ dampers feature a zinc plated body and protective black plastic sleeve to keep them looking good and working well for long into the future.

GAZ dampers for the 2CV can also be specially made with valving to suit road use and reduce the roll associated with the standard 2CV.

All the units are individually tested before leaving the factory and are covered by a two year warranty.

GAZ can supply dampers for all 2CV models made from July 1975 to 1990.

Order as GT9-2038 for the front and GT9-2039 for the rear. Retail price £103.62 plus VAT per damper.

For further details visit the GAZ website: www.gazshocks.com