Eurotuningnews.com

EnduroKA is a new endurance series for 2019 which offers a competitive, cost effective way to enjoy the thrill of team endurance racing.

The EnduroKA is run and managed by MSVT, and has already proved to be successful with over fifty cars currently in build and the first two rounds featured great grids.
Whether you’re a novice first time racer or an established competitor/Karter looking for a new challenge, EnduroKa has plenty to offer with its Great Circuits, Close Racing, High Driving Standards and more grin factor than any other UK endurance series. You just can’t fail to be smiling when you get out of a racing KA!

Preparing a car yourself would involve spending only £6,000-£7,000 including buying the donor. Split that between four drivers and that’s one cheap race car! Alternatively there are several teams that can build ‘Race ready’ vehicles.

There is very little to change on a racing KA and all the Burton supplied ‘Control parts’ are IN STOCK and AVAILABLE now for UNDER £2,000!
So what’s stopping you?

To find out more about the parts go to our website: www.burtonpower.com and click on the EnduroKA link.
To find out more about the series go to: www.enduroka.co.uk

The next round is Oulton Park 27th July 2019

In order to securely attach rubber or silicone water hose to rigid aluminium tubing the end of the tubing must be beaded.

The new Aeroflow Performance 3/8” Pipe Beading Tool is compact enough to be used on tubing that has already been installed.

The Aeroflow Performance 3/8” Pipe Beading Tool produces a properly positioned and perfectly radiused bead on 3/8” ID aluminium tubing with wall thicknesses from .035″ to .065″.

The Aeroflow Performance 3/8” Pipe Beading Tool retails from: £35.99 inc. VAT

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com

The Aeroflow BSPP-to-AN Male Flare Adaptor provides the means to quickly and easily make a connection between an 1/8″ BSPP and an AN -03 pipe fitting.

The Aeroflow BSPP-to-AN Male Flare Adaptor has been produced from stainless steel and precision machined for leak-free performance. It is ideal for adapting the 1/8″ fittings on various brake calipers, such as Wilwood, to an AN sized hose and fittings.

The Aeroflow BSPP-to-AN Male Flare Adaptor retails from: £11.99 inc. VAT

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.b-gdirect.com

Now MGB owners (and kit car owners using the later ‘B’ Series engine) can enjoy the performance, reliability and ‘tuneability’ of a single Weber DCOE carburetter or DCOE pattern throttle body.

The Webcon MGB Single DCOE Manifold is a single piece casting that comes with threaded ports for sensors and/or brake vacuum take off and mounting points for throttle linkage brackets.

The Webcon MGB Single DCOE Manifold can be ordered as part number MT0033R at £195.55 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Some of the most critical and most overlooked fuel connections on a Weber DCOE setup are the
intake unions. If these are anything less than 100% it could result in a serious fuel leak and possibly even an engine fire.

Webcon has always sold the individual parts, but the process of overhauling these parts has now been simplified by the introduction of three new fuel union kits.

Each kit contains: top quality fuel unions, banjo bolts, fibre washers and hose clamps. These ensure a perfect, professional fuel union overhaul on any single, twin or triple Weber DCOE or DCO/SP installation.

The part numbers and prices are:

Single DCOE Union kit FK00051 £27.49 plus vat
Twin DCOE Union kit FK00052 £54.95 plus vat
Triple DCOE Union kit FK00053 £84.95 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

A correctly operating choke cable will maximise the cold start performance of any manual choke carburettor and Webcon have been manufacturing and supplying the finest quality choke cables for over forty years.

Now there is a range of four different lengths and inners to suit almost all front engined applications and all are manufactured to Webcon’s exacting quality standards.

The range details are below:

Part Number Length Outer Length Inner Inner type Price
9990087400 54 Inch 57 Inch Bowden cable £18.72 plus vat
9990102300 72 Inch 78 Inch Bowden cable £19.12 plus vat
9990203400 54 Inch 57 Inch Piano wire £15.45 plus vat
9990221500 90 Inch 96 Inch Piano Wire £16.49 plus vat

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Now it’s possible to fit a MOMO (or similar) aftermarket steering wheel to a VW Caddy pick-up or van thanks to the new MOMO collapsible hub kit which is suitable for the 2003-onwards VW Caddy (2k).

This MOMO collapsible hub kit can be ordered as part number MK8017R and includes a set of fixing bolts for attaching any aftermarket steering wheel with a 6 x 70mm PCD.

The MK8017R MOMO collapsible hub kit is produced in Italy from cast aluminium and retails from: £81.59 inc VAT.

MOMO is the company that invented and market-launched the first collapsible steering wheel hub that we use today. Compared to a rigid hub, a collapsible hub can absorb outstanding impacts thanks to a programmed deformation, thus dramatically increasing the safety level in case of a collision. With the largest hub kit application catalogue in the industry, offering fitments for hundreds of different vehicles, why look any further for your hub kit than the pioneering MOMO range?

For more details contact Brown & Geeson Ltd.
+44 (0) 1268 764411 or visit their website: www.momo-uk.co.uk

Keeping your oil clean is especially important when your engine and gearbox share the same oil. Mini Spares can help with the Gold Magnetic Sump Plug which traps any tiny and potentially damaging metal particles that may be floating in your classic Mini’s oil to keep them safely out of the way until the next oil change.

This extra strong magnetic sump plug is constructed from 303 stainless steel and houses the latest super strong Neodymium magnet. This is currently the strongest type of magnet available for its size and is easily capable of lifting a whole packet of steel washers!

This sort of power will certainly provide your engine with the best protection possible.

Order as part number DP3.
Retail price: £18.25 inc VAT
(Overseas prices: Euro: 21.81€
AUS $33.22, US $25.55)

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

On an ‘A’ Series engine the primary gear thrust washers are made in varying sizes to take up any play.

The standard gap size should be between 3-6 thou., but Mini Spares offers various shims (DAM6486-7-8-9-90-92) as alternatives which step up in two thou. increments (which is the recommended tolerance).

Now Mini Spares has introduced a new thrust washer for the 1275cc crankshaft – part number DAM6492 – which is wider in width, to counteract wear. DAM6492 is 122-124″ thick making it the thickest shim available in this range.

Retail price £29.40 including VAT.
(Overseas prices: Euro: 33,52€
AUS $53.51, US $41.16)

For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com

If you are looking to lower your BMW F22 or F23 to reduce the centre of gravity and minimise body roll, M-Style can now offer H&R Sport Spring Kits from just £246 incl. VAT. The progressive spring rate design provides superb ride quality and comfort as well as enhancing the look of your vehicle with a reduced arch gap.

M-Style can also help the look of your vehicle even further.

Why not fit the springs and spacers together?

M-Style is currently running a fantastic offer on lowering springs and spacer package deals at its BMW specialist workshop in Essex. Prices start from £379 inc VAT and fitting.

For further details e-mail info@mstyle.co.uk or call 0208 598 9115